HATA ASUS ROG Phone II ZS660KL Metal Case, ASUS ROG Phone2 ZS660KL Armor Aluminum Alloy Metal Bumper Hollow Rugged Shockproof Anti-Drop Sturdy Cool Metal Cover for ASUS ROG Phone2 6.59 inch(Black)

This case is definitely an extreme case with an extreme look and very sharp design, but it has its flaws.Pros:- amazing design, better than any on the market for this phone.- camera, RGB, and flash cutouts are perfect- extreme corners and raised screen- full aluminum body- can easily put a wrist strap on itCons:- you must unscrew at least 2 little screws to remove the phone from the case- can have some sharp edges, but not bad.- the phone is only suspended on small foam corners- the phone back touches the backplate and can easily be scratched.- the phone is a little loose in the foam mounts, it can shake around in the case but won't fall out.- the raised edges make it a little difficult to touch the screen edges- the extreme corners make it a little difficult to use the air triggers and squeeze gestures.- the power button is a little hard to get to with the notch on the side.- the case makes it nearly impossible to use a phone stand depending on the design- it's not possible to use 180° charging cables with this caseOverall, it's a decent case for the average user, definitely eye candy to all and almost a conversation starter. With some modification, it can be a much more amazing case. I would cut the notch by the power button, open the air triggers some more, and open the port side some.Edit: I haven't tried it yet, but I thought it might fit better if you have the phone in the case it came with as well. It might not be as loose and the backplate won't scratch the phone then.

First, understand that this is an extreme case for an extreme phone. The thought and design that went into this case is next level. There are many things they got right with this case but, for me, there are several things that make the case unusable.First the good:This thing is solid! It feels like you could use your phone to drive nails all day and never hurt the phone. (Don't do that lol)The case has texture and edges that gives you a super secure feeling, like zero risk of your phone slipping from your hand.The holes all.mostlynline up as expected.The solid aluminum stands just far enough above the front and back surface of the phone to add real protection from slide related scratching, but not so such that you get left with the feeling of an ancient Nokia brick.Now the deal breakers:The design is super aggressive, and I love that. However, the placement of the"extra material" to give said aggressiveness us in so many wrong places. The top 3 bad placements....1. The Asus ROG 2 has air triggers on the right edge of the phone. The case has large swells of aluminum that renders the triggers inaccessible. If you do force your index fingers into the slots cut into the aluminum to try to use the triggers, you will be left with berry uncomfortable if not hurting fingers. This was a big deal as the air triggers are a hallmark of this phone.2. The aluminum swells at the center edges.of the sides makes accessing the power button problematic. Additionally, they also wear on your first joint on your index finger when trying Amazon reviews...lol3. There is a "crown" shape that extends from the top center of the back plate of this case. While I could see wanting to give the user a way to identify the top of the phone, the result is a very pointy bit that will ravage your pants pocket.All in all, I am sad to see this case returned to Amazon. Perhaps the artist that made this case can make one that addresses these issues. This would be an epic case!!

It's a bit bulky however it serves the purpose. What would have been a plus is if it had a kickstand to be able to watch movies without holding it.

The case is very sturdy and looks as advertised.But the phone is not a tight fit with the case. I feel the phone wobbles within the case

Me encanta

Good case sturdy. One thing I didn't like is that the small screws kept un-tighting.

Is a good solid metal case, you can use the air triggers through the cut outs. There is however a major complaint with this case that I have... Why would you ruin an almost perfect feeling case by adding a very sharp 3 pointed spike right where you hand goes? 🤔 I'm debating cutting it off with a grinder just to make the case actually usable in my hand. Gamers are gonna be squeezing the crap out of this phone... we don't want sharp things cutting up our hands. I wanted to love this case but the spike issue is very real for a phone that is meant to be held in landscape...

Heavy looks awesome

It's very rugged and tough!! Great durability,and really protects your phone! Although it would be nice and a bit better of it had a door flap to protect the screen in case it happen to Fall on the screen,in which case the phone protector Case wouldn't protect the screen! Otherwise it's really great in every other capacity!

The case is solid and nice but it is not practical for this phone. First in order to put the phone in the case you need to remove the screws insert the phone then put the screws back in. At this point any accessory that you have for the ROG 2 phone becomes useless. Because the case is big you cannot attach the fan or any other accessories. This was never mentioned in the add... I would not recommend this case.

I got my phone case today, no issues with putting the case on & looks very stylish! Design is Awesome !!However, I wish they had multiple color options, otherwise great to buy.

Very cool case I like it, I don't need to worry about the phone falling on the ground anymore👍

Amazing asthetics and protection for the phone.