描述
- About this item
- The SN10 incorporates a 6.5" driver. It has a massive magnet which (together with the increased size) up-rates the power to 70 watts RMS (8 ohms). The HF output is handled by a 1" soft domed tweeter driven by the crossover which operates at 3kHz.
- The cabinet is constructed from 19mm MDF and veneered in black. The front grille is removable. Input connectors are brass screw terminals and will also accept standard banana-type speaker plugs.The sound is punchy and very close to the familiar NS10s.
- The stereo imagery is excellent and the top end is smooth. Dimensions (mm): 220 x 225 x 330mm
- Isolation Pads Keep the sound coming from the speakers, not the surface they are standing on. decouple the energy from the supporting surface which in turn helps to give a more accurate monitoring environment.Suitable for speakers up 20kg.
- Dimensions of the supporting area are 280mm long x 100mm wide x 25mm thick. Please note these speakers are not active and require a separate power amp.
The SN10 incorporates a 6.5" driver. It has a massive magnet which (together with the increased size) up-rates the power to 70 watts RMS (8 ohms). The HF output is handled by a 1" soft domed tweeter driven by the crossover which operates at 3kHz. The cabinet is constructed from 19mm MDF and veneered in black. The front grille is removable. Specifications-Model: SN10 MKII-Frequency response: 50Hz - 20kHz-Sensitivity: 84dB-Rated impedance: 8 ohm-Rated power: 35W-Peak power: 70W-Crossover: 3.0kHz-LF unit: 6.5 inch woofer / 25mm voice coil / 35W-HF unit: 25mm voice coil / 10W-Max SPL: 109dB-Dimensions: 220 x 225 x 330mm-Weight: 5.84kgStudiospares Monitor Isolation Pads keep the sound coming from the speakers, not the surface they are standing on. Decouple the energy from the supporting surface which in turn helps to give a more accurate monitoring environment. Suitable for speakers up to 20kg.Dimensions of the supporting area are 280mm long x 100mm wide x 25mm thick.
