00265 Flat-Free 14.5" Tire and Wheel Assembly, Centered Hub, Ball Bearings, Adapter Kit Included, Replacement for Wheelbarrows and Carts, Easy Install Assembly

I was tired of flat tires on my small garden tractor trailer and these are a good fit. I have loaded the trailer with a few hundred pounds of soil many time and no issues with the tires. The hubs come preloaded with 5/8 bearings but also include a set of 3/4 inch bearings. I removed the 5/8 bearings with a hammer and large screwdriver as a punch and tapped in the larger bearings. A bit of work but not too bad. The bearings are not greased and the bearings and hubs should be filled with grease. The hubs did have grease fitting which is great.

This tire replaced an original wheelbarrow tire that's approx. 20 years old. I had a tube installed, but it eventually stopped holding air even with the tube.Using the included adapters was a fairly easy installation. The tire is thinner and, of course, harder than the original OEM tire. So the "ride" is rougher. But I'm using it, and it gets the job done just fine overall.I cannot speak to durability as it's only been installed a couple of weeks and I only used it one day. But so far, so good.

It took 5 minutes to exchange the old broken wheel on my wheelbarrow with this new one. Looks pretty sturdy. Perfect fit

Fit was good , solid , I thought it was a little pricey than it should of been.

In a word,,"FANTASTIC !!! At last,, no more flats or tire repairs.. Could not ask for a better solution and a affordable price. Just (1) one little issue that buyer's should be made aware of. These come to you with the 1/2" axle bearings installed. Your going to have to switch them out with the 3/4" one's that come supplied with the tire/wheel. I started with a punch to drive out the first bearing. Then flipped the assembly over and used a 15/16" deep socket to drive out the second bearing on the opposite side. To re-install the 3/4" bearings, I found that a 1 1/8 socket fit the bearing cage perfectly on the edges and used that to seat them. I found that the bearings are not of any quality at all but went ahead and used them because the cart is very seldom even used. That being said, I did the best that I could to hand pack them with grease prior to their installation. Also, I had to use my die grinder with a stone, and grind out the interior of the hub, in order to camphor out the opening and to remove the paint from the insides but just the depth of the bearing cage. The 3/4" cages are a bit too tight and removing a couple thousandths material will make this swap a whole lot easier for you. Be sure to put grease on the inside of the hub and pack the bearings prior to installing. I also found that when tightening the zirk fitting's,, that they ended up pointing towards the rim thusly preventing you from being able to use your grease gun to lube the wheels occasionally, so I removed them and put some small fiber washers on them and re-installed them and now the zirks are pointed out and exact for servicing.. Hope this information will help everyone out a bit.. Cheers and Good Luck

Replaced the tire un my 50 year old wheel barrow. with no problems.

I bought my first replacement wheel in 2018 and made it work hard for 5 years. This fall, the bearing went and pushing the wheelbarrow became difficult. It was great to still find the same product available at nearly the same price. Installation is easy, with a variety of spacers to make it work for your wheelbarrow. Now that I am older and have downsized to a smaller yard, I expect it will outlast me. Great value.

An excellent replacement for the original tire which had valve problems. The new one does not need to be pumped up and should last a longtime.

The tire is make with good quality rubber. Installation is simple! I am happy with the purchase.

Works great. I will never have to fill up that tire again with air

This replacement tire is perfect for my wheelbarrow that has a 3/4" axle. Other replacements I found were only good for 5/8" axle but this one has fittings for both sizes. The tire is very sturdy and feels like it will last a long time. Excellent purchase.

The peace of mind knowing I don’t have to pull out the bike pump to fill the old tire is worth it. The spacers included were nice but I didn’t use them because they were not big enough. I just had to cut the old Spacers from the wheelbarrow to make it fit.

Got tired of changing inner tubes and having the tire flat next time i used it. This is a solid rubber tire and fits perfectly. No more flats