O SHI CAR 15 Inch 3D Universal Artificial Leather Steering Wheel Cover Stitch On Wrap with Needle & Thread Non-Slip Black

The 15" fit our 2019 Cherokee perfectly.It took me about an hour to stitch it but it looks great and didn't make the wheel feel fat like the slip on kind.Pay no attention to reviews about the needle being dull or not being able to stitch around parts of the wheel.The needle is supposed to be dull as the pictures from the seller and reviews clearly show you loop the thread through the existing stitches. You do NOT try to push the needle through the leather. Also when you get to a "spoke" in the wheel you either tie and cut the thread and start again on the other side or you thread it through a few of the loops on the back side untill you reach the other side of the "spoke".I could make a video on technique but I aleady put mine on. Plus there are likely some on YouTube already.Basically if you have any common sense and and can focus on a task for more than 10 minutes you can install this.

Not the easiest to install but the point is for it to look custom and that takes time with a product like this. Took nearly two hours for meticulous work. However, after a month, it has held up beautifully and shows no signs of wear. It is really a nice, thick material and the accent stitching looks factory original, not like some cheap aftermarket add on. I'm very happy with the purchase. I was on the border between small and medium for my Subaru's wheel. Had to reorder a medium after receiving the small that I could barely get on the steering wheel. If yours is too tough to get on, let it sit in the sun or under a low head gun to allow for some extra pliability from the rubber/vinyl. Very happy with the end result.

Great product I have a 98 Lexus GS. The steering wheel had seen better days typically every couple of years a get a universal slip over cover either on amazon or wallmart, wanted to try this out until I could get one custom made to fit around the airbag and all. Simple enough install, had to search on youtube for tutorial. Went with a double baseball stitch for a more durable finish. All in all happy. Only one use when I was seeing the thread ripped. While I was tightening one of the corners. Ended up just doubling over on the back side to reinforce the area.

While it didn't come with instructions on how to install/lace the cover, after viewing a couple of Youtube videos, I had a good idea of how to proceed. It fit perfectly, and appears to be very well made. My steering wheel was hard textured plastic, and uncomfortable to grip for any extended time. This cover has made really solved that problem. It is soft, and with the slight increase in grip circumference, really helped.My steering wheel is 14.5 inches in diameter. I believe it called for a medium sized cover, however one reviewer recommended going to a small for a better fit. I'm glad it listened. I think using a small greatly improved the final fit by making it conform better to my steering wheel's contours.

I’m so glad that I purchased this instead of one of those slip on covers! It took us about an hour to install - the stitching is tedious. The only complaint I have is that the sides get a little bubbled but I don’t know how that could be remedied. We actually pulled the one side tighter in a fold to make it lay flatter. I love it and the grip is nice. Car is 2012 Honda Civic

This is definitely a worthwhile, inexpensive, and fantastic upgrade for any car or truck. I installed this cover on my 2005 Chevy Cavalier LS. The faux leather is super soft and comfortable to grip while at the same time has a tough and durable feel to it. I've done a few of these type of covers before from a different brand, but I will definitely buy this one again over any other type of stich on steering wheel cover. The install requires some patience and about 1-2 hours of time, but the result will leave you with a feeling of accomplishment and give any car an upgraded look. I highly recommend this product, especially at such an affordable price!

This is by far the best steering wheel cover I have ever purchased. Once you figure out the thread pattern which is pictured it is a simple repeat process. I did two loops across from each other and then pulled them snug. It took just over an hour start to finish. I did play around with the threading a bit around the different hub connections as to hide thread under. You might want to watch a sowing how to on YouTube when you get to the very end on how to tie the final knot. Great value!!

Purchased this last month. It looks fantastic! It fits perfectly! Not too hard to put on. There’s no shifting or sliding. The cover feels great; it’s very soft. I love the color blue in the stitching!It looked way too big when I took it out of the box, but when I started putting it on I really had to stretch it over the wheel.I have a 2004 Jeep Liberty and bought the 15 inch wrap if that helps anyone. It took a while for me to figure out the sizing.

I bought a cheap used Toyota for my son. The steering wheel vinyl had gotten so hot, it was oozing that sticky junk that you feel never comes off your hand. I bought a cheap non-stitch cover at the auto store. It would spin when I was turning without the wheel turning, so it was so dangerous. I watched the video on how to put this on. It isn’t hard once you see the pattern. Take your time. It feels amazing. It conforms to the wheel perfectly and doesn’t slip. I hope this lasts a while because I very much like it. And it looks cool on top of it all.

Excellent product. Went on fairly easily. Watch some videos on steering wheel cover lacing before installation. It definitely helped.

I LOVE the way this cover looks on my car! But if you don't like DIY projects, don't buy this cover! It took me close to 1 1/2 hours from start to finish, but I took my time to make sure I didn't mess up the stitching. No slip-on cover is going to look this good.As for the negatiive reviews people have posted:Yes, the cover is tight on the wheel...if it wasn't you couldn't get that professional look. It takes a little patience to fit it on correctly.There is PLENTY of thread. There were two small bags of thread and two needles included with my cover. I only opened one bag and had about four feet of thread left over from that bag.The directions shown in the description show exactly how to thread the cover. Just take your time. If done correctly, there is no way to break the needle.Only time will tell to see how long it will hold up, but for $10 you can't beat the professional look of this cover!

This is my second one. The first one I put on my 97 Ram, this one went on the 99. Watch the videos on YT and it is not too tough. Plan to spend about 45 minutes putting it on. Other than that, it’s a far superior product than the slip on ones or the old vinyl steering wheel covers. Just a side note, the cover fit a little tighter on the 99 Ram than the 97, but that might be due to the excessive wear on the 97(345,000 miles). Either way, I would still put them on again.

I dislike the new style of steering wheel covers that slip on and do not fit to the contour of the steering wheel. I found this cover and took a chance on it. I LOVE, LOVE, LOVE IT! It is durable, fits beautifully to my steering wheel, and makes driving even more of a joy!It will take about 1 HOUR to install....and some patience. Make sure to check out the YouTube videos for some insight now to get started. Pay close attention to how to FINISH the steering wheel cover...how to tie it off at the end. Also, have a backup needle with an eye in it just in case. The needle provided seemed to be almost plastic and broke about halfway through the project. Finished with a new one needle just fine.I put it on my Dodge RAM and almost didn't have enough "line" to finish. But figured it out. RAM steering wheels are thicker. Should work fine for any other applications!ENJOY! It's a great purchase!!

This is a really nice wrap, and it looks nice once done.Just remember that sewing will take you an hour or more, don't hurry, take your time and it will look really nice.The string that comes with it is plenty long for mistakes, in the end i had 50% of it still left.Grip is firm and cozy, i wish i had done this sooner.

I've used the other types, and never liked any of them... Especially the way they are secured to the steering wheel, the way they feel in your hand, and the distraction they create while driving. This one is near perfect... Soft yet tough, wide to cover the whole steering wheel, and stiches together for a sure grip and much better looks. AND a great price... What more could one want? Thanks