Rectorseal 83113 EZ 113 Trap, 3/4-Inch

Q: Does it come with the red caps?

Love them. I put them on 5 unit's at a Dentist office. Makes my job easier.

Q: Can this be installed anywhere on the condensate line? I've a mobile home with AC installed in a tiny closet and need to install it below the pan.

Ideally, you want the trap right off the evaporator coil with a tee and air vent on the outlet. If you can’t do that, it should work below the floor. Drop off the coil through the floor. Put an elbow off the outlet of your drop and run a 4” to 6” piece of pipe to the trap inlet. Run the trap outlet into the side outlet of a tee. The ends of the tee should be vertical (one facing up and one facing down). Put a 4” to 6” piece of open pipe into the upward facing end of the tee. This is your air vent. It gives air in the drain a place to escape and helps the condensate to drain better. Run a pipe from the downward facing end of the tee to a floor drain, condensate pump or sump crock - wherever you want the condensate to ultimately drain. Good luck.

Q: Can it be used on a roof unit with heavy sun exposure?

These units are made with PVC plastic and can become brittle with age after prolonged exposure to UV light from the sun. However, depending where your outside is, I would be more concerned with condensate water in the tubing loop, or trap, that could freeze and damage the plastic, thereby rendering the unit inoperable.

Q: Should pvc come out the lower red capped piece for a vent?

No the upper portal is where the PVC tube from the equipment drain goes into. The lower portal is where the PVC tube continues out to your drain there is no vent tube. If you think you need a vent then open the highest red capped cover because if theres a backup the open capped is where it will run over unless you put a tube in that is higher than the drain hole on the equipment that you are using the tube to take the fluids away. But then you will have an over flow in your equipment if there is no over flow protection system to shut off your equipment.

产品编号: 22034411

安全交易

细节

Brand
Rectorseal
Material
Polyvinyl
Color
RED AND WHITE
Product Dimensions
2"L x 8.5"W
Inside Diameter
0.75 Inches
Item Weight
0.18 Kilograms

🔍clear cleanable trap design

⏱️fast & easy installation

⚙️3/4" diameter precision fit

经常一起购买

Rectorseal 83113 EZ 113 Trap, 3/4-Inch

Rectorseal 83114 2 EZ 113B Trap Kit with Brush

描述

🔧 Upgrade your HVAC game with the trap that works as hard as you do!

COMPACT DURABLE - 3/4" diameter with a 1" U-bend fits seamlessly into tight spaces while handling pressure up to 2 PSI.
QUICK ACCESS CLEANING - Transparent trap lets you spot and clear blockages in seconds—no guesswork needed.
LIGHTWEIGHT ECONOMICAL - Thinner walled PVC construction delivers reliable performance without breaking the budget.
STREAMLINED INSTALLATION - Plug-and-play design means you’re up and running faster, saving valuable time.
EFFORTLESS CONDENSATE DRAINAGE - Optimized for diverse HVAC systems to keep your setup running flawlessly.

The Rectorseal 83113 EZ 113 Trap is a 3/4-inch diameter, clear PVC condensate trap designed for light-duty HVAC applications. Featuring a thinner wall for economy, it offers fast installation, easy cleaning access, and reliable drainage performance, making it an essential, budget-friendly component for professional-grade HVAC maintenance.

规格

Brand	Rectorseal
Material	Polyvinyl Chloride (PVC)
Color	RED AND WHITE
Product Dimensions	2"L x 8.5"W
Inside Diameter	0.75 Inches
Item Weight	0.18 Kilograms
Maximum Pressure	2
Nominal Wall Thickness	0.17 inches
Outside Diameter	1.5 Inches
Item Length	8.5 Inches
UPC	021449831130
Manufacturer	Rectorseal
Global Trade Identification Number	00021449831130
Part Number	83113
Item Weight	6.4 ounces
Item model number	83113
Is Discontinued By Manufacturer	No
Size	0.75 Inch
Style	3/4"
Item Package Quantity	1
Measurement System	inch
Included Components	Rectorseal 83113 EZ 113 Trap, 3/4-Inch
Batteries Included?	No
Batteries Required?	No