TWTADE Momentary Polarity Reverse Switch DC 12V 20A Motor Control 6 Pin 3 Position (ON)-Off-(ON) AC 110V-220V Black Boat Rocker Toggle Switch with Wire KCD2-223-JT

Works perfectly for my use!

Great item for the price

True measurements of the switch body for mounting hole is as follows:0.84" on the narrow side,1.29" across the long side including compression tab,1.075"across long side not including compression tabs.This switch could be pushed THROUGH a hole that is listed on this page that is 1.5"x1.1"This and many other switches have a bezel that covers the hole the switch fits into.The switch body size is the governing factor for a mounting hole, not the bezel size.The mounting hole should be greater than 0.84" on the short side and less than 1.29" on the long side.The compression tabs would not work in a 1/8" panel because they are not designed to grip a panel that thick.It appears the tabs are designed for a 1/16" to 3/32" thick panel.In my opinion , the hole should be about 0.88" x 1.25" and a 1/16" thick panel.This will allow for the compression tabs to hold the switch firmly when it is pressed into a plate.This is the size I will use for a FrontPanelExpress dotcom design for a mounting plate for 5 of these switches plus a momentary key switch.

you touched my fishing gear and

Works great fast shipping good price

I have an old friend who called me up and offered me his non-working True recumbent bike. He told me that it was not working but it's in like-new condition just fix that electronic board and you are good to go. Well, I could not find a replacement board and I did not know if it would work anyway so I looked at how the resistance worked it was a geared motor 6v so I hooked up a 3.7v battery to the motor and it moved closer to the flywheel and it gave it more resistance. I reversed polarity and it went the other way easing up on resistance. After a quick search for a reverse polarity switch, I found this, and after hooking up the battery to it and the motor. This bike works great now but instead of some fancy lights and graphs, I am in charge of the resistance which I like better I can just jump on the bike start pedaling and increase resistance as much as I want, and then lighten the load super quick. This switch saved this bike from the graveyard and is getting me and my wife into shape for almost free!

I like these switches, but they are not standard sized 1-1/2" Rocker Switches! These are 1.0" x 0.8" Switches. It took me over half an hour to find one single Switch Mounting Plate of the matching size- there is one option on Amazon. The product description states that these are 1.5" (38mm) switches, but they are NOT.Nonetheless, I decided to keep these because I like the substantial wires they came with. However, now I have to return ship the 1.5" switch mounting plate I bought. I also have to order the only available 1.0" Rocker Switch Mounting Plate available on Amazon.

Worked as described