Kore K-WM-CHINUP-BAR-SR-ABS Pull-Up Bar and Ab Strap Combo

Bit difficult to install by self. Get it installed by a professional carpenter and it'll be perfect for use! Can handle 70-75kg easily, dependent on perfect installation.. Strong and sturdy and good paint and finishing. Good soft sponge for grip

Everything you need to know I've covered in this review - The product is very good quality. It is sturdy and welds are also proper. The oil paint, foam, dimentions everything is best for the price it comes at. The only and biggest problem is the installation. Here are main points from my installation experience - 1. First and foremost, the 8 mm anchor bolts provided with the product aren't good. Don't even try them and get more holes in your wall. 2. Buy 8 Rowl Bolts of M10 size from local hardware shop. One piece may cost between 20-25 rupees. 3. Find a professional (electrician or plumber) to install it. Do not try to DIY this as it requires precision and tools that may not be available with you. 4. However if you want to DIY like I did, get those 8 x M10 Rowl Bolts and you will require 14mm drill bit (around 100-150 rupees) to install the bolts. Also get a 17 number wrench (around 50 rupees) to tighten the bolts. 5. You will also require drill machine and water level to check that the bars are perfectly horizontal. I recommend doing a websearch on how to use Rowl bolts. 6. M10 bolts are the best option. It provides sufficient strength and sturdiness. You can go for M12 bolts but then you will have to make the holes in rectangular plate bigger which is another problem in it's own. 7. The holes in the rectangular plate are barely enough to occupy M10 bolt. Hence you need to install the plates very precisely as there is very little room for adjustment and this is the main reason you should get a professional to do it. 8. Best way is to install one bar while checking with water level tube that it's horizontal, then attach second bar along with the rod, make markings for the second bar and then install it. 9. Prefer not to make all holes all together. Install one bar and then do the marking as explained in previous point. 10. In my case I have mounted this on a RC wall. It is made of chicken wire and reinforcement steel. So it is only 4 inch thick but very strong. In case you are mounting it in a brick wall, make sure your wall is minimum 9inch thick. Or alternatively you can find where you lintel beam is and mount on that (hoping not to get steel while drilling). 11. While drilling in a brick wall make sure to get the bolts in the brick and not in the cement part used for bonding. This is trial and error method. Use small drill bit to check if red dust comes then it's brick else it's cement. It has been a hazzle to install this product. It would have been much easier if the manufacturer started including M10 bolts with the product and 12 mm holes in the plates.

Very good product.

Good bar but not easy to install

💯✅👍great