🔋 Power Up Your Safety Game!
The ACEIRMC 1S 3.7V 10A 6MOS Charger PCB BMS Protection Board is engineered for 1S Li-ion/Li-Polymer battery cells, offering robust protection features including overcharging, over-discharging, and short circuit safeguards. With a current rating of 15A and compliance with CE and FCC standards, this board ensures reliable performance and safety for your battery applications.
| Current Rating | 15 Amps |
| Input Voltage | 3.7 Volts |
| Output Voltage | 5 Volts |
| Energy Specifications Met | CE, FCC |
| Color | 6pcs |
R**G
what was needed!
So far as Described. I know the vendor is not a manufacturer. So I wont hold my breath. However, this configuration is difficult to employ, say on a cylindrical cells. Some use a common Ground this one uses a common positive (B+ and P+). I spot welded tin strips to the contacts on either side, then ran the strips to the battery contacts on an unprotected cell, spot welded to the battery. Negative I taped off totally, covered exposed tin and most of the PCB. 3rd tin strip I ran 2 solid core 22ga wire to the P- from the strip, this formed a new Batt Neg. I would love a better set of contacts for this last part. Tested in a charger and it recognized correctly. Very pleased with behavior. Also like a variant with a 3V to 4.2V firm range, since the typical 1S operates outside spec.
B**.
WORKS AS ADVERTISED
Great product..works great.havnt tested all of them but the 3 I used all seem to work fine...well worth price
J**.
Worked twice quit letting batteries charge
Got 10 of these all but 2 just quit letting batteries charge after 3-5 charges .akes it a pain in the ass having to tare apart and put in better quality ones
TrustPilot
2 周前
3 周前
