🔗 Connect with Confidence!
The GeeekPi 6Pack TXS0108E is an 8-channel logic level converter designed for seamless bi-directional communication between 3.3V and 5V devices. With a compact design and versatile compatibility with various serial interfaces, this converter is perfect for hobbyists and professionals alike, ensuring your projects run smoothly and efficiently.
| Brand | GeeekPi |
| Package Dimensions | 13.2 x 10.7 x 1.3 cm; 20 g |
| Item model number | D-0010 |
| Manufacturer | GeeekPi |
| Processor Type | Cortex |
| Are Batteries Included | No |
| Item Weight | 20 g |
| Guaranteed software updates until | unknown |
M**O
They work
I am using them to connect an modern CPU working at 3.3V to a CANbus device that works at 5V using an SPI bus. These devices work rally well even at 25MHz SPI clock speed with no degredation of the signal. Excellent value for the price just remember to connect the OE pin to 3V3 (via a resistor) to get them working.
C**.
Great little product
Hi,Great little product, high quality. Be careful with the OE pin or Output Enable I think it means, as unlike other logic level shifters, if that isn’t tied high, then the outputs are all low.Regards,Christopher
A**R
Two way interfacing 3.3 and 5 volts
These boards allow the two most common logic level devices to interface with no fear of overvolting. 3.3 volt devices running safely from a five volt device and 5 volt devices receiving their full logic levels from a 3.3 volt device. Ideal for home electronics experiments and projects, in particular interfacing between Raspberry Pi and Arduino devices.
B**)
This is NOT the same as TXB0108
I didn't realize that this IC (TXS0108) is not the same as the TXB0108 which I have been using for years. I use the TXB0108 to convert UART signals between a 3.5V microcontroller and a 5V device. This PCB with the TXS0108 apparently works differently and I think it requires other components because all my connections were find but data was not going through. For the price of the TXB0108 dev board, I didn't wast time goign through the datasheets of the TXS0108 to figure what was wrong, I just ordered the TXB0108 from another website.
C**N
Connecteurs à souder livrées non conformes.
Chaque composant possède 2 rangées de 10 broches.Après avoir reçu la commande, j'ai regardé le descriptif de l'article sur Amazonet celui-ci précise que l'article est livré avec 2 connecteurs de 8 brocheset en fin de compte, on reçoit 2 connecteurs de 7 broches.Remarquez 8, c'était déjà perdu.
E**I
Works for me
Using to convert MIDI signals from 3.3 to 5 v and back. Also good for i2c
J**N
great value
They do what they say
D**L
Tried all 6 for using with ws2811 pixels to convert 3.3v to 5v data signal.
Tried all 6 for using with ws2811 pixels to convert 3.3v to 5v data signal. Tried everything I could search for on the Internet with no luck. Switched to the 4 channel I2C modules and worked perfect. Don't think the units were defective but just not compatible with my application.
TrustPilot
2 个月前
5天前