2000 PSI 1.2 GPM Pressure Washer (Open Frame GPW2003) GPW2003

I bought this Greenworks 1900 PSI electric pressure washer mainly to clean my driveway and car, and it’s been better than I expected. It has plenty of power for an electric unit — strong enough to remove dirt, mildew, and grime without being overkill. It’s lightweight and compact, so it’s easy to move around and store when I’m done. Setup was simple and didn’t take long at all. I also like that it starts right up with no fuss, and it’s much quieter than gas pressure washers. I’ve used it on my car, patio, and outdoor furniture, and it’s handled everything well. For regular home use, this pressure washer gets the job done without the hassle of gas or maintenance. Definitely a solid buy for the price.

This was a perfect replacement for an almost identical Greenworks pressure washer that finally packed it in after being stored outside (perhaps "left outside" is more accurate). It works well and expect it to work for many years even if I continue to store it outside :).

November in West Virginia is not the best time to buy a power washer, but I was setting up the outdoor fire pit for Thanksgiving, and the yellow resin Adirondack chairs had been sitting out a couple of years. Scrubbing had not budged the black discoloration, so I searched power washers and purchased this little Greenworks 1600 attracted by the PSI and the size, weight, and maneuverability to work around our house on a farm. I have experience with larger, more powerful washers so was hopeful. Assembly was pretty straight forward, with the exception of how to attach the soap holding bottle for certain applications, e.g. car washing. ( A quick youtube video solved that.) Set 'er up, attached the hose, ran water through it, plugged it in, turned it on, and, presto, spanking clean chairs to welcome our guests!! True, only one use so far, but am optimistic for outdoor concrete patio and stoops (we're on a slab between the tree line and front field), the cars and equipment, and the outdoor shower floor in the spring. AND ABSOLUTELY NO LEAKS UPON THE FIRST USE!! (Note: engine does not run unless the nozzle trigger is pulled.)

This is a great pressure washer for tasks around the house. I use it to clean the walls and floor of my pool when I drain it. This new model turns on and off when you squeeze the trigger on the spray handle, my old one didn’t have that feature.

I got this baby just for personal use, none extreme high use. This baby was easy to use and setup. Most of the connections does fit good, and this baby is extremely lightweight. This product does have amazing cleaning power, obviously you have others that do a better job, however this works for home personal use.

I just received this washer and thoroughly tested it on my pressure-treated wood deck, so this review is a "first use" type of review – I'll update it if anything goes wrong in long-term usage. I like using electric pressure washers for home use – they provide plenty of power for most cleaning duties while NOT providing too much power for things like cleaning wood decks or painted items (I learned this the hard way years ago when I rented a gas-powered PW and damaged my deck with too much pressure). They're also relatively quiet and easy to maintain. I ruined my old, cheap, off-brand pressure washer after a half-dozen years, so I hunted for a new one and chose this company and model. The packaging is remarkable (surprisingly small box) and assembly is easy, despite the somewhat lame instructions with tiny illustrations. It's packed in a very efficient but complex way, so you may want to take pictures as you unbox so that you can get everything back in the box if you choose to return it. I wanted a PW that would store on my garage shelving and not take up valuable floor space (my garage is my wood shop, so floor space is vital). I planned to modify it to be a "carry" type of PW, but to my delight, I didn't need to! The handle is easily removed, leaving a perfectly-sized item for shelf storage (I'll have to put up a hook for the handle and hose, etc). On my first use, I thought "this is going back." Using the highest-pressure nozzle, the pressure was just not as strong as my old "2200 psi" model (that was more like 1700 PSI). But I decided to try the nozzle, gun, and after-market pressure hose from my old PW, and the difference was remarkable! Instantly much more pressure – enough to actually damage my deck, which my old PW never had. And great pressure for washing my brick and driveway. So my first STRONG recommendation would be to get some after-market nozzles and a better hose. The provided hose seems nice, but I think it doesn't provide enough water/pressure for the gun. It seems to be a common problem with these cheap models – my old PW was instantly more powerful with the same upgrades. I bought the upgrades from HD – their cheapest hose (Power Care) – a bit stiff when you first use it, but the sun and/or Southern heat seemed to loosen it up nicely. It's plenty strong enough for an electric PW. A word on the "turbo" nozzle – it may be fine for washing cars (I don't know – I enjoy washing my cars by hand with a soft brush), but it spays a small circular pattern that requires multiple passes to eliminate, so it's not as time-efficient as regular nozzles. Some other notes: – the unit shuts down when the gun (or wand) trigger is released. This is SO great (with my old one, I had to keep the thing spraying as I walked over to switch it off – otherwise it would trip the circuit protection on the device). The cord on this unit has the typical built in circuit protector, but also has a "pigtail" (a short cord between the circuit protector and the plug) which allows it to fit more easily into outdoor outlets that have covers. Nice touch. – the "brass" looking connectors are just anodized aluminum. I suspected this would be the case, given the price point, and yes they're aluminum throughout. The problem with aluminum is that it will cause a dielectric reaction with brass (if you have brass fittings on your hoses), resulting in "galvanic corrosion," or a frozen connection that requires effort and tools to disconnect. Probably not a problem with a pressure washer, since you'll likely disconnect it after use. You might think "won't the anodized fittings prevent this??" and yes they may at first, but the anodized finish will quickly wear off on the threads, and it’s not really brass – just brass-colored aluminum.. My recommendation is to coat the fittings with Dupont Chain-Saver, a favorite wax-based lube that contains Teflon. This durable lube (it dries quickly on chains or threads and leaves a wax and Teflon coating) should cut down on any corrosion, and make the connections much smoother. – this washer is relatively loud, especially when idling (less so during use). I'd say the loudness level is similar to a loud vacuum cleaner – not nearly as loud as a gas motor, but louder than my old PW, which was quite quiet. But the way I see it, it's payback for my neighbors who somehow are able to hunt down the loudest leaf blowers known to man. – the plastic components seem very robust and well designed. – this PW is EXTREMELY light weight for a PW – easy to lift even when fully assembled. That's great for moving it around and lifting onto a shelf (after removing the handle) but it does make me wonder about longevity (I generally prefer heavy tools – maybe that's a woodworking thing). I purchased the 3-year Asurion insurance for $24, which I would recommend for ANY electric PW). – the wheels are held on with wire clips. On my first use, one fell off and I had to hunt for it in the grass (I have yet to find the washer that also fell off). Surprisingly bad design. A simple solution is to zip-tie the ends of the clips to keep them from spreading and falling off. A better solution is modifying the connection with a bolt (preferably stainless steel). This would require drilling out the axle to enlarge the hole, but I think it's the way I'm going to go. EDIT: I just did the zip-tie and it's fine. I have this way of making things complicated but I have learned to wait a day, laugh at myself, and just do the simple thing. – the wheels are large and the device is super-easy to move around (the light weight helps here as well). – one last note: the instructions say to turn your hose on fully... I don't think this is wise if you have high water pressure like we do. The device can only pressurize a certain amount of water per minute anyway, and excessive pressure may cause internal leaks and damage. I mention this because I think that's what killed my previous electric PW – I typically turned my water on about half way, which was perfect. But one day I wasn't thinking (might have been temporary heat stroke from this ridiculously hot Summer) and I turned it up all the way. The unit stopped working and water was dripping from the case. I couldn't disassemble it because of super-deep screws, so I don't know for sure but it seems likely that the excess pressure ruptured seals and/or overloaded the pressure manifold. So be mindful – if you have strong water pressure, then maybe back it off a bit... you just need need a steady supply of water delivered to the thing... more water won't result in more pressure from the PW – it's limited by the pressure manifold. All in all, I've gone from "this is going back" to "I really like this thing" so I'll be keeping it. But I strongly recommend upgrading the hose (the gun, or wand, is fine) and the nozzles. Keep in mind that these devices typically have a short life span, so you may want to get the Asurion protection. And you might want ear plugs, or even better a pair of noise-cancelling ear buds so you can listen to your favorite music while doing a somewhat lengthy chore (I use Apple Airpods when doing any yard work – the noise-canceling is amazing, as is the sound quality). My main concern with this lightweight unit is durability – I will certainly update this review immediately if any problems arise. If you don't see any edited to this review, then you can assume all is well. All the best to you! You could have probably finished your deck in the time it took to read all this :D

Used as a secondary pressure washer, but one for the roof of our building. Save us the trouble of having to carry the gas one up. Great product, enough power

The product worked well, but the power cord seems to have failed so it no longer works. I am returning it for a free replacement

Desde hace tiempo quería comprar una hidro, estaba sobre la karcher, pero su precio me detenía. Al poner esta en oferta y ver las reseñas me anime a comprarla y fue muy buena compra. Funciona perfecto, lavo los coches y el patio donde están mis perros, y queda súper bien! Gasto mucho menos agua que antes! La uso por tiempos cortos de menos de 10 min para cuidarla, aunque fácil puede seguir por otros 5 min o mas sin pasarle nada.

Llegó en tiempo y funciona hasta ahora

It's my fault that I do not realize it's an product in 110V. But it perform very well after I purchased the power converter and the NPT thread hose adaptor.

Acabo de recibir la hidrolavadora, aún no la uso, me Llegó hoy. Llegó bien empaquetada, solo que me llegó sin una pieza, que es el gancho de la manguera

Excelente llevo 4 equipos de estos y no dan problemas