Mini SAS 36 SFF-8087 to (4) SFF-8482 Connectors With SATA Power (0.5m)

they do exactly what they are suppossed to...Bear in mind these are for NOT SATA drives these are for SAS Drives.Also remember that modern SAS drives support a power down feature, if you plug your drives in to these and the drive doesn't spin up its not these cables fault its the way the power is supplied, you need to either use a molex to SATA power supply (which doesnt use the 3.3v) or disable the 3.3v on the SATA power connector. I used a SATA power splitter and simply cut the 3.3v stopping the supply thereAgain thats a feature of your HDD not a fault with these cables, these cables work great.

I found this when looking for a cable to connect to my HBA for multiple drives without needed multiple SAS to Sata adaptors.It worked perfectly and allowed me to change the sector size of 4 drives at once instead of 1 at a time and when you have 50+ drives to do each taking between 2 hours to 24 hours, every little thing makes a difference.Quality wise it's fantastic, very happy with it and it's now installed in my pc which I use specifically for changing hdd sector sizes.

Decent quality, data cables are sturdy and flexible, housing is solid and provides full dual port speeds using a flashed IBM m1015 to IT mode. Initial bend is a bit difficult in shallow cases but with a bit of work can be achieved. I've used these and the single port versions these provided substainlly better throughout.SATA power connectors seem a bit flimsy but hold well. Ordered 2 (dual port HBA) both work perfectly so far been a few weeks.

Cables are of good quality and work as expected, price is fair and easily installed.

This cable will plug into your sas controller card or if your motherboard supports it, into that i guess.The othe end plugs into your sas drive and then a standard sata power cable plugs into the back of this cable at the sas drive end.Dont forget to initialise the drive in windows' disk management ' to see the disk in windows.cable can support 4 sas drives, but keep an eye on your sas controller card as this will really heat up and need to be cooled.Me, I only have 1 drive connected so just let the pc fans take away the heat.great little cable.

out of 4 cables one was faulty

Initially thought these were not working. However, they will be fine if you mask the first three sata power pins using tape. Use Google to confirm. No need for molexTwo cables working perfectly for SAS drives

Bought to connect SAS drives to an LSI 9220-8i host bus adapter. Plug one end into the HBA, the other into the SAS drive and piggyback a standard PSU SATA power cable on the back of the drive connector.The cables are thin, but shielded, so far written 5TB through them without errors. They are flexible and easily bent, but probably best not to kink them, and only pull on the connector rather than the cables.Have to press pretty hard to make the SAS connection and also the PSU cable connection, but fine.Just on e thing to watch - the depth of the piggyback connector is more than a standard SATA connector, so check it wont hit your motherboard or if disks face sideways, that there is enough case width - on an Antec One case, there isn't really.Happy overall - I bought a second one afterwards.

Très utile pour monter plusieurs SSD. Très content, merci

Works

Probado en hp dl 360 den9.

Article bien emballé, conforme et arrivé dans les temps. Vendeur à recommander

Già utilizzato con soddisfazione per la creazione di un nas domestico con dischi SAS e in questo caso utilizzato per una espensione del sistema.