Car Battery Terminal Connectors, 2 Pcs 4 Way Quick Release Disconnect Car Battery Terminal for SAE/JIS Type A Posts, Compatible With Cars, Vans, Trucks and More

Easy installation. Good fit. Makes it super easy to disconnect battery

These work great. After 9 months, the positive one broke, though. May have been because of the corrosion.

Easy to install. Feel like good quality. Easy to disconnect in truck we dont drive alot

Pretty sure they're gold plated zinc. You get what seems like a lot of stuff, but don't get too excited. The included wire terminals are for maybe 12 AWG and not great quality. The terminal cleaning wire brush isn't an expensive item to buy on it's own. The terminal screws could be stainless, but they are magnetic. The magnetic types of stainless steel are also usually not as corrosion resistant as non-magnetic ones. The primary cable connection for these is adequate. I used a nail nearly as large as the threaded opening, inserted from underneath to corral the bare wires inside the clamping section intended for them. I then used the Allen head screw to push the nail out of the way as I directed the Allen head screw into the threaded side. That group of wires combines into at least 0000 AWG, probably 5/8", and these connectors can handle it. Having the additional wiring locations is nice. I do plan to cut off those that I don't use, otherwise I have concerns that these terminals might be a little too large in some vehicles. At least remove any screws not being used and check carefully for unexpected contact points below this connector. Update: I like it better after actually installing it. The Allen head screws (5mm key) allow for pretty darn good clamping down of bare cable wires and ring terminals. The cam arrangement provides good clamping to top mounted battery terminals. On Amazon, Uxcell offers a pair of nice red and black covers that fit these as well, with provisions for the entrance of the two additional ring terminal cables per each, like they were made for use with these battery terminal connectors (B07X46DBTD). Be sure to assemble things with those included to begin with and avoid doing that twice. Rather than leaving my original notes above, I corrected statements to reflect my actual findings thus far.

these are on my f350 and easy to install and for the price is way cheaper than the autoparts store ,no problems same size as any terminals, works good if u plan on taking battery out.

I ordered these for my F100 while I'm in there upgrading some electrical items and increasing my electrical demands with such things as EFI, modern gauges and dash, electric fans and fuel pump. I am using 1/0 battery cables and these terminals don't support wire that big. They seem like they'd be ok for something small. For the $8 I paid I'll throw them on a shelf but they are not fitting my needs to incorporate large battery cables. The method to attach the 1/0 cable just isn't big or sturdy enough.

PROS: Cheap Functional Decent quality Comes with lots of tools Fit on my battery Pretty easy to install if you have wire cutters and a blade CONS: If you wire is too thin, you'll have to flip the little crimping mechanism upside down. As you can see in the photos, there's a little more meat on the top of the metal part that clamps the wire down. The positive terminal came from two wires, so there was enough wire to clamp down without flipping the metal piece. The negative end was too thin and could slip out. So I flipped the clamp upside down and it tightened down perfectly. Other than that small issue, I love the look and price of these. I hope they last a long time.

They work great. Easy to install. Fit my battery with no problems. The connection is strong and works great. The car started every time this winter. I can’t ask for much more than that.