Statorade - Electric Bike Hub Motor Cooling Ferrofluid

Statorade - Electric Bike Hub Motor Cooling Ferrofluid

Q: for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

In general, the Statorade will naturally settle on the magnets once the motor spins for a short while. Sealing the casing with silicone should be fine, but I cannot speak to how well that motor is sealed. Please keep in mind that Statorade is not to be used with geared motors, as it will only serve to trap heat inside the motor. I was not able to find information online whether or not the Xiaomi M365 Pro is direct drive or geared, so use at your own discretion.

Q: again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

As long as it is a direct drive motor and the motor side plates are sealed, then about 4mL should be sufficient for a small hub like that and you only need to add it once for life. If you don't have a good side cover seal though, then it could leak out over time and require replacing.

Q: Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Yes, it's very easy to clean it out with an absorbent cloth or paper towel. But if you have the motor open to either add or remove Statorade from magnets, you can also see very clearly what style of motor you have too! The only ones where it will have a significant cooling effect our direct drive outrunner motors.

Q: Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c

Yes it will, any direct drive hub. Add Hubsinks to get the full effect though. If the motor casing can’t shed the extra heat Statorade transfers from the core, it won’t do much good.

产品编号: 452568839

安全交易

细节

Brand
Grin
Voltage
12 Volts
Material
magnetite
Item Weight
1.6 Ounces
Manufacturer
Grin Ltd

⚡40% power boost

💧5-8mL needed

🔧2mm injection

经常一起购买

Grin Technologies Statorade Electric Bike Hub Motor Cooling Ferrofluid (10 Ml)

HubSink V2 E-Bike Hub Motor Heatsink for Improved Cooling and Performance (QS205)

描述

🚴‍♂️ Cool your ride, amp your power!

HEAT BE GONE - Increase continuous motor power capability by up to 40% without overheating.
UNLEASH THE POWER - Double your motor cooling capacity with Statorade!
COMPACT EFFICIENT - Only 5-8mL needed for maximum performance.
EFFORTLESS APPLICATION - Mess-free injection with included Luer Lock Syringe.
ENGINEERED FOR EXCELLENCE - Crafted from high-quality magnetite and synthetic materials.

Statorade is a revolutionary cooling solution for electric bike hub motors, designed to enhance performance by doubling cooling capacity and increasing power capability by up to 40%. With a minimal application of just 5-8mL, it ensures a mess-free experience thanks to the included Luer Lock Syringe, making it an essential upgrade for any serious e-bike enthusiast.

规格

Brand	Grin Technologies
Voltage	12 Volts
Material	magnetite, synthetic
Item Weight	1.6 Ounces
Manufacturer	Grin Technologies Ltd
UPC	628461000362
Country of Origin	USA
Model number	Statorade_10mL
Number of Memory Sticks	1
Item Weight	45.3 g
Package Dimensions	20.29 x 10.9 x 2.9 cm; 45.36 g
Item model number	Statorade_10mL
Power Source	corded electric
Are batteries included?	No

有问题吗？看看别人问了什么

for the xiaomi m365 pro where to apply that exactly ? between each magnet ? to seal motor casing with clear silicon is fine ? it escape from bearing ?

again fot the m365 pro do we need to replace or add more with time ferrofluid or we do that 1 time is for life ? is possible it go to short electronic

Can i get the statorade out of the motor? i don’t know if my motor is an inrunner or outrunner😔

Will this work with a qs v3 5000w motor. here is the amazon link https://www.amazon.com/5000w-highest-torque-windings-motor/dp/b06y5nld1l/ref=sr_1_3?c