ZIRO3D Printer Filament, Matte PLA Filament 1.75mm, Multicolor Soft Colors Rainbow PLA,1KG/2.2lb 3D Printing Material No-Shine, Macaron

The Cloud PLA Filament provides a smooth, consistent printing experience with a subtle, cloud-like color transition. This filament ensures excellent layer adhesion and minimal warping, making it ideal for high-quality prints. Perfect for projects that require a soft, airy appearance with reliable performance.The Gradient Twinkling Filament captivates with its mesmerizing color transitions and sparkling effect. It's perfect for adding a dynamic and eye-catching element to your 3D prints, ensuring each piece stands out with depth and vibrancy.

This stuff prints well and looks awesome! No issues with layer adhesion. With proper settings no stringing issues either. Nice shiny fun color prints. It performs well both at standard and high speeds. I have purchased multiple rolls and will continue to. Something I noticed about my last roll was that it had a twist in it near the middle of the spool and another near the last quarter of the spool. This caused a shift in the colors. However, in my opinion, it made the print that it was used in (dragon egg) more interesting. In other models it may have been an issue. This current roll I’m using appears to have a shift or twist in it viewing from the side, I will be mindful of that when printing however, I don’t foresee any problems as I use it for prints where I really want the colors to pop. I will continue to use it.

Pretty much everything about this filament is fantastic - it printed great out of the box with my standard PLA settings (Anycubic Vyper) and I successfully printed a Benchy and two Cinderwing3D dragons (pictured) with no print failures! The matte finish feels really neat, almost like wood, and it seems like the details are more clear than with a silk filament. The only issue I had was that the bottom layer on all of the dragon segments peeled off with the brim, but the rest of the print seems fine (no delamination etc.) so I'm not sure what happened with the bottom layer. I'll definitely be buying more of this filament, and in the other colors they have.

So I will talk about the filament itself, first. This stuff is cool. It's opaque, so light shines through it, just a little. But it makes really cool-looking prints. It took a little bit to find the right temp (for me, it's 206 degrees), but my prints look great once I got it dialed in. I do see some layer lines at times, but that may have been the way I sliced the print.The bad was in the shipping. Apparently, I was not the only one to get a broken spool. I taped it back together, and that seemed to do the trick, but I was constantly concerned that it would jam and ruin my prints.

The media could not be loaded.  I'm a new 3D printer and this was my first gradient filament. I was afraid to use it at first. I have a Bambu Lab P1S w/AMS and selected the Polyterra PLA setting with a 60c bed. It printed perfectly every time so far. Pictured are the MatMaireMakes Zombie Bearded Dragon and Twisty Prints Hodag. I printed the Hodags one right after the other, and the same with the Zombie Beardie, so you can see the full gambit of colors the spool has to offer. Models can look very different just depending on where on the spool the colors lie, but the gradual fade is excellent between the colors and the color changes fairly quickly. The filament itself felt very dry and dare I say "rough" or harsh to the touch, unlike the Inland or Bambu filaments I had used before which feel so smooth, but it had no issues running through the AMS, and I appreciated the plastic spool because the cradboard ones have such issues rolling and often need rims printed so they function in the AMS. No need with Ziro and I plan to try more colors in this brand FOR SURE! So clean of print, and no issues. One of the more expensive filaments out there but oh so worth it for such ease of use!

This filament by far is the worse to work with I have ever dealt with. I used the recommended temps and multiple machines. NEVER got a good print yet. I even tried drying it thinking it had absorbed moisture in TRANSIT or in WAREHOUSE. I opened it immediately upon delivery and tried to print a standard Benchy and it FAILED almost immediately. Loaded a different Brand of filament (not here to promote anyone) thinking it was a printer setup or slice issue and the same file same slice printed perfectly. Tried it again on my new P1P which HAD yet to fail on a single print. It clogged the hotend and spit like it was wet. I left it for about 2 days in a dehydrator AGAIN to try to dry it out more. Tried on my Ankermake and it would was so thick it clobbed all over the place and then failed. Again I tried another filament and file printed just fine. This repeated itself until I made the decision to never use this roll. My wife not knowing I hated this filament but loved the color tried to print a waving cat and it UNDER extruded even when she rammed up the flow to 150% to try to save the print. I have ZIRO (like that pun) completed prints with this filament. Yes it was a great price but its the equivalent of buying a fully detailed beater car. Sure it looks great SITTING there but when you try to use it all you get it headache and frustration leaving you STUCK.Tried on 5 different slicers and 8 different Machines, TWO Ender 3 Pro Sprite upgraded, Ender 3 Pro, Ender 3 Neo, Ender 5 S1, Ankermake M5, Bambu P1P, and Neptune 3 Max ALL FAILED.DO NOT BUY THIS PRODUCT!!!

I like the prints with this filament. I will say that my AMS does not like it though. It wants to get stuck or not feed it very well. Not sure why? Looks great though once I can get a print out of it.

I have had no problems printing this silk. Its durable and can be used with Bambu Lab Silk Profile with Great results. However the color is really ugly when printing flat layers. When printing a figure it looks like the image on amazon

Das PLA druckt sich sehr gut, die Farben sind sehr schon und erinnern and den blauen Ozean. Der Farbwechsel ist kürzer als bei vielen anderen Filamenten, wodurch es auch für kleinere Modelle gut funktioniert.

Todo perfecto con este material y marca, los colores muy suaves y bonitos, no he puesto foto por qie da error al subirla. Pero es recomendable.

si stampa senza problemi, consigliato

Have had this for a few weeks now and can say it prints well on my Bambu X1C with little to know config needed.The colours are just as shown in the pics and adheres to the print bed fine at 30c for me.