ABS Filament 1.75 mm, 3D Printer Filament, Heat Resistance +/- 0.03 mm, 1 kg Spool (2.2 lbs), for FDM Printer, Black

It's my second spool of this black ABS, printed some of the parts to build this 2040 frame voron in photo, and ran the first test print at 200mm/s at 8000mm/s acceleration with 300mm/s at 20000mm/s acceleration travel, first layer at 100mm/s bed temp 100c, 90c 2nd layer on, with pei steel plate, no problem with adhesions, dont need glue nothing, not even brim, good to me. Can't complain.

I used this filament for my dissertation and I am very satisfied with the result.

I've bought loads of this over the last few years as my goto ABS brand. Historically it printed beautifully and without issues.My recent batch of filament are all totally garbage - huge amount of warping, lots of failures (despite using exactly the same print file as used before with this brand). Won't be buying again.

Thought I would dabble in some ABS, I don’t have an enclosure and use an Ender S1, maybe it was the summer heat in the room but it basically printed it like it was PLA, I print around 250c range and 95c bed temps, I’ve mainly made practical objects and as of yet had not one single failed print

Good quality

Doesnt print, smell or adhere like ABS.Bonded so well to my PEI sheet it ripped a hole in it. Seems to brittle to be ABS, and has a weird smell that I don't recognize.Ive printed plenty of ABS and I'm not sure what blend this is, but it doesn't behave like normal ABS for sure.

Un peu de warping sur ma première impression.J'ai reduit un peu la vitesse et ensuite très bien sur Neptune 4 pro

Ok

Das Filament ist durchgehend gleichmäßig dick. Die Drucke sehen gut aus und sind ausreichend belastbar. Ich als Anfänger hatte nur kleine Schwierigkeiten, die aber nur durch die fehlende Erfahrung entstanden sind. Es kommt in einer Tüte luftdicht verschweißt an.

Filamento abs de optima qualidade, é fácil tirar boas impressões com temperaturas mais baixas e a funcionar muito bem.

The media could not be loaded.  Wanted to try and print with ABS for the first time. I have been printing with PLA, PETG and some TPU before but I found this even more reliable compared to my PLA prints (I print them at 250mm with 5000mm/s² acceleration)The ABS I was printing at about 80-120mm with 3000mm/s² acceleration.Can't complain at all. First print was perfect already.Bed temp;First layer: 100°cOther layers: 96°cNozzle temp;First layer:235°cOther layers: 228-230°cWith 5% fan speed on overhangs.The printer I used is a ender 5S1 with a custom G10 printbed (sanded with 120 and 200 grid sandpaper) and using some adhesion spray as well, for reliability.Haven't had a print fail after about 800 grams (about 30 prints)Even without an enclosure although it warps slightly the printbed can flex a bit since it's only attached on the sides. Works like a charmCan recommend for sure.