🚽 Elevate Your Bathroom Experience with Style and Comfort!
The ProPerhome Square Toilet Seat Cover combines high-quality urea formaldehyde material with a soft-close mechanism, ensuring a quiet and hygienic bathroom experience. With a load capacity of 280 kg and 99% antibacterial properties, this toilet seat is designed for durability and cleanliness. Its adjustable stainless steel fittings make it compatible with a wide range of O-shaped toilets, while the easy installation and quick-release features simplify maintenance.
Item Dimensions L x W | 29L x 4W centimetres |
Style Name | Modern |
Item Shape | Square |
Colour | F |
Operation Mode | Automatic |
Material Type | Stainless Steel,Urea Formaldehyde |
M**.
Very Good Quality with Excellent Soft Close Mechanism
The media could not be loaded. This toilet seat arrived in its own branded, sturdy cardboard box.The seat itself was wrapped in thick shrink wrap plastic with foam inserts in the box to protect it in transit. The instructions and all parts necessary for fitting are inside the shrink wrap. The only tool needed is a cross head screwdriver to tighten the screws in the plugs.For some reason the box also contained a couple of felt animal stickers, a giraffe and a reindeer!Our toilet is a slightly unusual shape so I was delighted to find this seat that fits perfectly.A really nice design feature of this seat is that it clips on to the pegs on the brackets. One press of the large, chrome button on the hinge (see pictures) allows the seat to be completely lifted off the toilet for cleaning. It simply clicks back into place.You start by removing the old seat then fit the plugs and concentric brackets into the available holes. There isn’t a wing nut that tightens from below like most toilet seats but, instead, the plugs expand into the holes when the screws are tightened from above (in a similar manner to a Rawl plug). You tighten the brackets until you can just about move them then clip the toilet seat onto the pegs. Because the brackets are concentric they can be rotated to get the correct alignment, width and position of the toilet seat. Once you have aligned the toilet seat you unclip it from the pegs and tighten the screws so that the brackets don’t move. Put the decorative stainless steel covers over the brackets, clip the toilet seat back on and the job is done. The whole process took about 15 minutes and the seat is solid and doesn’t move around at all.The text of the instructions is all in German but the illustrations are easy to follow.The soft close mechanism works really well (see video). No more toilet seat crashing down and waking the whole house in the middle of the night!This is a good quality toilet seat. It is very easy to fit, the soft close mechanism works perfectly and it is excellent value at £35.99.
S**T
Best Soft Close Yet (£35 at review)
The media could not be loaded. We run a holiday cottage and these tend to last a year before breakage or (mostly) staining. This is made of a strong plastic so not porous as cheaper painted wood variants are. So I am hoping for improved stain resistance. This is well made and I think will resist clumsy (drunk) visits to the loo which happens quite often.The seat and lid and mechanics are very solid too. Sure you can spend half of the £35 asked for - but you get what you pays for. See vid for some fitting detail.Very good soft close action. Excellent
T**Y
Good quality and well designed - make sure you have the right shaped toilet!!
Sadly I've not been able to install this, as it's the wrong shape for my toilet. I obviously won't be removing stars for this, as it's my misunderstanding of what "shape" seat fits what. But for those looking to purchase, this is a pointedly squared design, and will require a squared toilet too, not traditional oval. We live in a new-build and I naively thought that a modern loo-seat would fit modern loos. This is not the case. I do feel disappointed that at least one of the product page images, as well as the video, appear to show a rounded seat - this isn't what I received. So be careful. This is the square fit.The build quality appears to be good. I've had everything out of the packaging when I attempted to install and it feels pretty good. It reports that the material used avoids discolouration and is 99.9% antibacterial, which is a pretty bold claim, but a great feature if accurate.It also has very high load bearing - up to 280kg - which is around 44 stone! So if you're very heavy, or need to stand on the loo to clean somewhere high, then you shouldn't have any concerns.Probably the best feature though, is that after installation there is a quick-release button on the underside that you press and can remove the seat leaving just the fittings. This is actually a really nice feature, that I've not seen before. It means you can take it out the way and give those areas around the fittings a good clean - as that often is where you find a lot of dirt/dust settles.Price is a little high for what's essentially a plastic toilet seat - I've paid a little more for solid oak soft-closes before, so £35.99 current price feels a little on the pricey side. It's because of this, and the general nature of the product page - misleading product images, poorly written English instructions - that I'm withholding one star. As mentioned before though, I hold my hands up about ordering the wrong thing. I should have read "square" in the title, and instead went by images - but to be honest, this should be a valid approach too.
T**N
Great Quality, Just Check Size And Shape
Our toilet seat had broken and we needed a new one. So I ordered this to try: - The toilet seat arrived in a decent box with the installation bits and some good instructions. - The instructions are easy to follow and the seat is super easy to install. - I unfortunately didn't check the shape and size of our toilet so this didn't fit properly... But that's my mistake. - It feels of a robust and excellent quality! - It seems easy to clean and keep clean with a quick release button on the base of the seat in the middle when you lift up the seat. This makes cleaning under and behind the seat much easier!Measure your toilet and check the shape, but I would highly recommend this brand and this seat!
A**E
Einfache Montage und gutes Preisleistungsverhältnis.
Schnelle Lieferung. Sehr einfache Montage.Qualität für den Preis sehr gut.
T**S
Qualität, Optik, Haptik, Funktion, Montage – alles sehr gut, günstig, schwache Deklaration
ProPerhome WC Sitz mit Absenkautomatik ,Toilettendecke, einfache Montage Antibakteriell Klodeckel aus Duroplast,F Form Weiß Toilettensitz mit Edelstahl Befestigung,abnehmbar WC Sitz>>>> Gesamt: 4,5 SterneAbbildungen: korrektBeschreibungen: korrekt, Zusatzinfo s.u.Qualität: 5 SterneFunktion: 5 SterneAnleitung / Deklaration: 3,5 SterneProduktverpackung: 5 SternePreis/Leistung: 4 SterneLieferung: 4,5 SterneQualität, Optik, Haptik, Funktion, Montage – alles sehr gut, günstig, schwache Deklaration>>>> Hinweis zu Abbildungen und Produktbeschreibung auf der Produktseite:Beschreibung und Abbildungen sind im Wesentlichen stimmig.Zusatzinfo:Montagematerial wird mitgeliefert.Beigelegt sind 2 putzige Aufkleber aus filzartigem Material, je ca. 20 x 18 cm groß.>>>> Produktqualität:5 SterneAlle Teile sind sehr gut verarbeitet. Brille und Deckel wirken hochwertig und robust.Ich kann keine Fehler wie Kratzer, Grate etc. erkennen.Lt. Produktseite soll die Tragfähigkeit bis zu 280 kg gehen. Da bin ich mir nicht ganz so sicher. Aber der Sitz hält sicherlich ordentlich was aus.Obwohl die Aufkleber mit dem Toilettensitz nichts zu tun haben, gebe ich den ½ Stern wieder drauf, den ich wegen der zweifelhaften Tragfähigkeitswerbung abgezogen haben.>>>> Funktion:5 SterneDie Scharniere sind teils vormontiert. Mit dem mitgelieferten Montagematerial läßt sich der Sitz vergleichsweise zwar leicht montieren. Hinzu kommt, daß man Deckel und Brille per Knopfdruck komplett lösen und darunter gut putzen kann. Noch besser: der alte Sitz hat die gleiche Funktion. Dessen Streben ein wenig versetzt und schwups paßt der neue auf die alten Streben. Bei mir hats geklappt.Die Absenkautomatik funktioniert perfekt. Deckel und Brille senken sich binnen weniger Sekunden geräuschlos.Sitz und Deckel sehen gut aus.>>>> Anleitung / Deklaration:3,5 SterneAnleitung vorhanden: ja, deutsch, sehr gut verständlich, gut lesbare Schriftgröße, sehr gut bebildert.Hersteller deklariert: neinEU-Repräsentant deklariert: jaHerstellungsland deklariert: nein, aber chinesische Schriftzeichen am Etikett sprechen für ChinaMaterial deklariert: neinTechnische Daten deklariert: nein (die max. Belastbarkeit soll lt. Produktseite bei 280 kg liegen)Europäisches CE-Zeichen angegeben: jaHerstellungsdatum angegeben: nein>>>> Produktverpackung:5 SterneFolie, Plastiktüte für das Montagematerial, Schaumstoff, Karton.>>>> Preis-Leistungsverhältnis:4 SterneDer Preis (EUR 43,99) abzgl. 5 Euro Rabattgutschein auf der Produktseite (gültig bis 31.08.2022) ist m.E. günstig. Den Gutschein berücksichtige ich, weil er zum Bestellzeitpunkt noch fast 1 Monat gültig ist.>>>> Lieferung4,5 SterneAmazon-Paket, Lieferung binnen 3 Werktagen; das ist gut. Der Versand erfolgte in gut angepaßtem Pappkarton, nichts verschwendet, dennoch gut geschützt.Ich habe den Artikel im Rahmen des Amazon-Vine-Programms kostenlos erhalten zum Testen. Das beeinflusst meine Rezension aber nicht.Ich hoffe, die Rezension war für Sie hilfreich.
A**S
gute qualität
zum günstigen preis
E**L
Praktischer Klodeckel, schnell montierbar und per Tastendruck zu lösen
Der Deckel auf unserem Klobecken war schon ein paar Jahre alt und von unten nicht mehr sehr ansehnlich. Da ließ sich auch nichts reinigen, egal womit. Weil mir der "ProPerhome WC Sitz mit Absenkautomatik ,Toilettendecke, einfache Montage Antibakteriell Klodeckel aus Duroplast,F Form Weiß Toilettensitz mit Edelstahl Befestigung,abnehmbar WC Sitz" zum Testen angeboten wurde, nahm ich das gern an, schließlich ist die Auswahl für die spezielle Form des Klobeckens bei uns nicht so riesig.Bei mir kam kurz nach der Bestellung ein entsprechend großer Pappkarton an, weiß mit aufgedruckter Produktskizze und ein paar Informationen. In diesem Karton war der Sitz ordentlich sicher verpackt (Schaumstoffecken) und zusätzlich in Folie eingeschweißt. Mit drin lagen ein Beutelchen mit dem Montagematerial und ein Blatt Montageanleitung.Der Deckel war sehr gut verarbeitet, seine Qualität entsprach in etwa der des bisherigen Modells, was vor Jahren aber schon deutlich teurer war. Mir persönlich gefallen sehr massive Deckel zwar besser, aber das war hier keine zwingende Voraussetzung, Hauptsache stabil - und stabil fühlte sich das neue Teil durchaus an.Nach dem Überfliegen der Anleitung, die tatsächlich ein deutscher Sprache und mit guten Skizzen vorlag, wurde mir sofort klar, dass ich nun endlich mal eine Montagemöglichkeit hatte, bei der man sich nicht unter dem Klobecken halb verrenken musste, um irgendwelche Muttern oder Schraubhülsen usw. festhalten zu können. Sehr schön - ich war gespannt.Vorher musste der alte Deckel weichen, was eben nur mit Verrenkungen möglich war. Dann war natürlich eine gründliche Reinigung des Klobeckens angebracht, weil man ja sonst nie unter die Beschläge schaute. Hier ein Tipp aus Erfahrung: Reinigen mit Hilfe gewisser Sprayflaschen, die speziell für sanitäre Einrichtungen gedacht sind, ist völlig in Ordnung, nur sollte man anschließend mit einem Lappen und klarem Wasser nachputzen, weil man so vermeidet, dass die bei der Deckelmontage untergelegten Gummischablonen ankleben. Bitte auch das Trocknen nicht vergessen.Ich setzte die Beschläge in der richtigen Reihgenfolge zusammen und steckte die mit den Spreizdübeln voran in die beiden Löcher am Klobecken. Zuerst bekam ich einen kleinen Schreck, denn die Spreizdübel passten nicht vollständig in die Löcher, standen noch etwa 1 cm raus. So ging das natürlich nicht, der Deckel sollte ja nicht kippeln oder teilweise frei hängen. Dann stützte ich mich mal deutlich energischer auf diese Teile und siehe da - schwupps waren die komplett versenkt. Jetzt zog ich die Schrauben soweit an, dass ich die Beschläge gerade noch so bewegen konnte.Hier war nun das Aufsetzen der Deckels dran, was wirklich einem Kinderspiel glich. Ich musste nur beide Zapfen der Beschläge in den passenden Abstand bringen, dann den Deckel aufsetzen und einrasten.Mit heruntergeklapptem Deckel schob ich das ganze Konstrukt nun so lange hin und her, vor und zurück, bis das ordentlich über dem Klobecken ausgerichtet war. Zum Glück waren in der richtigen Position die Schrauben der Beschläge bei mir erreichbar und ich konnte die nun richtig festziehen.Danach habe ich den Deckel mit Druck auf die glänzende Taste nochmal abgenommen, die beiden Edelstahlblenden auf die Beschläge gesetzt und den Deckel wieder angebracht. Fertig.Das sah gut und vorallem schön neu aus. Etwas irritierte mich an dieser Stelle aber die innere Form der Klobrille, denn das war ein Rechteck mit abgerundeten Ecken. Kannte ich vorher nicht, außerdem kenne ich niemanden, mit rechteckigem Hinterteil ...Es war wirklich eine Umgewöhnung nötig, die sich aber in zwei, drei Tagen erledigte. Zum Glück. Trotzdem empfehle ich dem Hersteller, zumindest die beiden Seiten der Brille ein wenig oval auszuformen. Das ist bequemer.Unter dem Strich ein sehr praktischer Klodeckel, der sich schneller montieren ließ, als alle Deckel, die ich bisher kannte. Für Reinigungszwecke läßt sich der Deckel per Tastendruck abnehmen und genauso leicht wieder aufsetzen. Die Absenkautomatik funktioniert hervorragend. Aktuell werden für das Produkt knapp 36 Euro verlangt, was ich angemessen finde.Von mir gibt es eine Kaufempfehlung.
K**.
Defekt
An sich nicht schlecht, lässt sich gut reinigen aber leider ist die Absenkautomatik schon nach 2 Monaten kaputt gegangen. Also nicht mehr zu gebrauchen... Umtausch nicht möglich.