Lypumso 3D White Carbon Fiber Vinyl Wrap, Car Wrap Film Roll with Air-Release Technology, Auto Decal Exterior and Interior Wrapping Film, Vehicle Self Adhesive Sticker (1FT x 10FT) (BAYDE803-08)

Really like this wrap. It takes a little practice but once you get used to how it works, it's great. I find this vinyl works much better with plenty heat compared to other vinyls I've used when wrapping furniture etc.I'm using it to wrap the inside of my BMW. Absolutely love the look it gives. Makes the car feel much more modern. It's fiddly, but if you're like me, and enjoy a project then it's worth every penny!

Good quality, quite thick, maybe not the most adhesive, but looks great when applied.

I bought this to replace the previous wrap on my car steering wheel as it was looking a little old. This arrived very quickly and there is lots of it, so will be able to wrap other things in the future.I started off by cutting a section from the roll large enough for what I needed and then laid it flat with some mugs holding down the corners and left it overnight. I was left with a flat sheet of the carbon material.It was super easy to use - I just placed my piece of trim on to the carbon fibre wrap and it stuck on with ease - the glue is very sticky. I then cut small incisions into the wrap so I could wrap around the fiddly bits. Then make sure there is no air bubbles and finish off by giving it a blast with a hair drier to make the adhesive bond to the trim and wrap it better.Very easy to use, and this is quite a large roll for such a cheap price.

Love the look of this product when installed, it's got a lovely carbon fibre pattern and to the untrained eye could pass as legitimate BUT it is not pleasant to work with, the adhesion is lacklustre and within minutes of my car being in the sun on a hot day it had started to peel and lift.I ordered a second roll in case I was just unlucky and got a duff roll first time around but second roll was the same.I think the focus has been on making it look good rather than adhere correctly. For context I used Gtechniq panel wipe and dried off with a separate cloth then warmed the surface up and the film with a heat gun before applying.Perhaps my lack of experience with wrapping is the issue

I’m very particular when it comes to my motor and the standard Aluminium trim in the Audi S range always starts to corrode, I looked into the real stuff however Audi would like over £1,000 for the 7 pieces of interior trim. I opted for the third best thing (given carbon skinning is still quite costly) and had a look for a wrap to hide the unsightly scratches and corrosion in the trim. This product is very reasonably priced and as such I ordered 2 rolls (knowing I’d make a few errors as I’ve not wrapped anything for around 7 years now and that if it didn’t look right, it not much lost. Carbon style wraps are always more difficult to install due to having to be thicker the more realistic they look however plenty of prep, heat and patience will get you the look you want on the corners. In the shade, it’s quite clearly a wrap, however under sunlight, and certain interior lighting at night, it’s quite convincing and looks very well. As such it’s very good value for money to say it’s not a named brand, the adhesion is good but only time will tell how good, and as previously stated, carbon style is always more difficult to work with compared to a standard gloss black however I would still highly recommend this product for an interior trim make over

The media could not be loaded. Purchased 2 rolls of this wrap as I thought it was a quality product, but I was wrong. I followed the installation instructions to keep the wrap dry and out of direct sunlight for 48 hours, in fact I left the car in my garage for 4 days to be sure.But when we had a spot of rain when I left the car out side almost a week later, well the photos and video shows the issues. Parts of this "waterproof" as advertised wrap looks like it is still wet when in fact it is actually dry. It looks like water has penatrated the wrap somehow and has now left a less than desirable effect.I have vinyl wrapped may vehicles in the past and have never encountered this issue. A lot of time and effort, not to mention money gone to waste and has left me very angry knowing that I'm going to have to take this rubbish off, purchase another wrap elsewhere and do all of the work again.If you want a good quality waterproof wrap that is for external use, then stay away from this product and purchase from elsewhere.

Used this to customise My ND2 bait boat stand. Worked really well

Product came very quickly (next day delivery for £5 or so) gloss shine looks very good after the clear wrapper is taken off, and looks like very real to authentic CFRP. All you need is some scissors to cut to size, razor blade to cut off excess and cut for shaping to corners/ curves and then just use a hair dryer on a medium hot setting and can use your thumb to pull out and squeeze out air bubbles and creases (a squeegee tool would be better). All around a very good product and is exactly what I wanted