XXGO 155 Pcs Finger Oscillating Multi Tool Sanding Pads Accessories Kits Include 150 Pcs Multitool Finger Sanding Paper and 5 Pcs Multi Tool Finger Sanding Pads XG155F

My Dewalt 20V oscillating saw is one of my favorite saws and this kit is a nice accessory to have to get into tight corners that need sanding. These worked out well for me after I cut my composite dock boards to length. These came in handy for the two closest boards to the piling that had to be cut with an oscillating saw which left melted plastic. These cleaned up the edges and look great. Like every other sanding pad you really only burn out the tip.

These are an absolute joke. On even the slowest speed the pads last all of a few minutes till worn out and useless. The paper itself even worse. Falls off the pad in less than 30 seconds. The grit barely used, the backing disintegrated, rendering the paper useless. Find another alternative don’t waste your time & money on garbage like this that doesn’t work.

Great value, nice assortment of sanding grits

They delivery was next-day! Tons of good sandpaper and 4 tools Problem - if you sit on the tip for too long (maybe 15 seconds) it will melt the velcro and rubber on the tip making it near-impossible to remove the sandpaper. You can still use the tool, but it's not as effective. It could be that me DeWalt is ridiculously fast, and I have no way to slow it down. Overall great product.

In theory, these are great. They are exactly what I was looking for. Unfortunately, the backer pads burn up in no time. They get hot and melt, the pads slide constantly. From the first moment I tried it out, the I’m using this on my Dremel Multi Tool. It clearly states in the listing that it comes with the adapter to do so, but no instructions. I messaged to ask, but got the response they it doesn’t work with this product? But it did. Idk who is running the ship over there but they are confused. I put the adapter on like how I thought it was to go on and it works fine in that regard. I’m giving it two stars instead of one because it is very cheap, but this stuff will probably just become landfill fodder that shouldn’t be sold since the quality is so poor. I don’t think these backer pads will last through even half of these sanding pads.

These fit my Dremel oscillating tool just fine. I'm actually impressed with the life of each paper pad. I had to sand down some wood and body filler after patching up some exterior wood damage on a window frame. Considering how small each pad is I was able to get quite a bit of filler sanded down with mostly just the tip since I was trying to mimic the original contours. The only issue I have is that the pads are so small that most of them down have the grit marking on them so you have to judge the grit based on the looking at the actual grit. I would definitely buy these again.

Junk. Paper won't stay on oscilating finger. Only last 30 seconds then falls off.

I have the bigger triangle sanding attachment, and they work well when there is space. For tighter locations, like corners, I really needed these finger sandpaper attachments. They save so much time. The sand paper wear out fast because they are small, but still they are worth every penny.

Great item, ends melt though if using alot

The larger sanding pads that typically come supplied with multitools from my perspective are a bit unnecessary as I use my mouse sander instead when required. That said, the smaller finger sanding plates in this set are a very useful addition: the reduced sanding area is great for getting into tight corners and awkward joints, angles and the like. What I especially like is the velcro pad is on both the front and back faces of the plate which is very handy - it means you can either attach 2 different grits which is a bit of a time saver, or it allows the plate access to some tighter areas when you cant rotate the machine. As with all similar sanding plates, the weak point is the velcro pad itself - if you allow heat to build up the plastic melts destroying the little hooks that grip the paper. These plates are just as vulnerable to this as any others I have tried, including much more expensive name brand ones so in this respect they are neither any better nor any worse than others. Slow and steady sanding with reduced speed helps this immensely but the plates always melt eventually in my eperience. The sand paper that is supplied in the kit is good, the hook and loop backing is better than many I have tried in the past in that there is a greater amount of the fibres on the pad giving it a particularly strong grip to the plate. The abrasive action is great the range of grits grits provide a comprehensive range for sanding wood to the point of being ready for finishing. There are pleny of pads supplied to keep you going for a while as generally these attachments are only used for small areas/quick jobs. These sanding plates fit my 12v and 18v Milwaukee multitools (gen1 and gen2) with no problems so I can further recommend them in that respect.

I am not sure why these have some negative reviews, I have found this kit to be a superb addition to my toolbox. The 'fingers' are much more solid than expected, the loops have not melted and the sanding pads stayed exactly where they were put. Perhaps these reports are from numpties who use their multitool on full speed for sanding? Glad I bought them as this purchase has enabled me to sand down the radiators much more effectively and much faster than would have been possible without.

Once it gets warm the valcro pad comes off and it's useless then

These attachments cannot withstand any sort of friction heat and I went through 3 in about 20minutes when the sanding pads themselves were still relatively unworn. Having had a Makita attachment for two years and using it on much harder surfaces I didn’t expect it to match but did expect better. Am returning