ivoler 2-Pack Screen Protector Tempered Glass for Google Pixel 4a 4G (5.8 inch)[Fingerprint Unlock Compatible] with Easy Installation Frame 9H Hardness Bubble Free for Pixel 4a 4G

3/7/2024: The screen protector just arrived and I installed it on the phone (Samsung Galaxy A54 5G). I was very impressed with the quality of the screen protector kit. Everything was in the plastic storage box that was supposed to be. Three of everything. With the jig that is included the screen protector was very easy to install and it lined up perfectly on my phone screen. It almost installed itself. I did have a couple of places where I had to carefully lift the edge of the screen protector as shown in the video to work out the bubbles, but it was very easy just like shown in the video. I do have one little bubble that I was unable to get out even with lifting the screen protector several times (see yellow circle on photo #4). FYI: In photo #4 on the RH edge it looks like a bubble, but that is just a reflection from the lighting. Included were stickers that are labeled “Guide Stickers”, but there is nothing in the two website videos or in the included direction sheet that states how to use them. I am guessing they are used with the jig to assist with the placement of the screen protector. But I did not figure this out until after I had installed the screen protector. But it would have been easier to use them. Provided in the kit were three “wet” cloths and three “dry” cloths, each sealed individually in their own wrapper. I liked this. Some screen protector kits only give you one dry cloth because they figure you can reuse it for multiple installations. With this kit, you get three each sealed individually to avoid getting dirty/dusty. I specifically wanted a glass screen protector and not a film protector. I was impressed by the quality of these glass screen protectors. For the cons; The documentation does need improvement: - The included instructions on the small card cover 6 languages and the text is so small it is almost unreadable. I took a photo of the English instructions and zoomed in so I could read them on my phone. See photo #3. - In Photo #3 I highlighted one paragraph that addresses applying the screen protector. The screen protector for my phone has a small hole for the “selfie” camera. I was aware of this so I was careful to apply the screen protector so the hole was over the “selfie” camera lens. However adding a warning about this would be a benefit. I am sure someone out there installed the screen protector with the selfie hole at the wrong end and then realized they had covered up the selfie camera! : ) Ouch! - One of the items in the kit is the camera lens protector. There was nothing in the two videos nor the instructions that referenced how to install them. But you probably just use the same cleaning process used for the screen protector, and then remove them from the “sticky card”, and stick them on your phone to protect the camera lenses. - When you go the website you’ll see two videos (#A and #B in photo #1). I watched video A which said do NOT press in the middle of the screen protector to start it “sealing” to the phone’s screen. Then in Video #B it shows pressing in the middle of the screen to start it sealing against the phone's screen. LOL! Apparently, the presenter in video #B did not watch video #A! Haha! This is shown in Photo #2. I have placed video #A on top and video #B on the bottom showing the disagreement. Given the protector must seal itself to the phone screen, it seems like pressing on one END is the way to go to ensure you do not have a lot of unsealed areas with air bubbles, instead of pressing in the middle. I am pretty handy installing screen protectors so I would definitely purchase this screen protector in the future given the quantity and how easy it was to install. Just be aware that the documentation is lacking.

My eyesight has deteriorated enough that my daughter had to install this screen protector for me. She did it under my close and immediate supervision (I hovered around annoying her). The screen cleaned to perfection and a lone small lint jumped into the adhesive layer, smack in the middle of the screen. It is small enough not to have created a bubble. The alignment frame positioned the plate to within 0.001" and it looks perfect. The surface keeps reasonably clean. It is not as clean and nice as the one Samsung puts on the phone, but I do not think there is an aftermarket screen protector that is as good as the OEM screen the phone uses. Also note the glass is quite a bit smaller than the visible telephone's screen. There are several technical reasons why this is so. If you install the screen protector as well as my child did, you will not notice it. You will see it if you look for it, but it is not noticable and does not interfere with the phone's operation at all. The little gadget that slips over the phone's rear cameras' lenses fits neatly and provides an optically flat protection for the lenses. I checked both front and rear surfaces for hardness. They are much harder than tool steel and this should indicate they are made of optical glass. The surface seems to be polished very well. The edges of the rear cameras' plate are a bit warped but the areas over the lenses are very flat and should not distort the image in any measurable way. The screen protector has a hole over the selfie lens. Many screen makers do that, although there is really no need for it. Having said that, if you install the screen protector correctly, it will not cover the selfie lens at all and will not have any impact on image quality. Overall, this inexpensive product (you get THREE sets for the price) installs easily, and operates flawlessly. It should provide a very long service.

Great pack of tempered glass for my iPhone. I am so tired of paying so much money at the cell phone store for the screen to crack within a few weeks and then tell you even though it’s “covered for life” you still have to pay. It fit my screen perfectly, the price is on point for a 2 pack, easy to apply on the screen and has worked perfectly with my touch screen and has been scratch resistance

This was the best screen protector installation I've ever come across. No bubbles, no dust particles underneath - what a stress-free installation! Not sure if this helped, but I watched their video first (I even had it playing while I was installing the screen protector). It seems sturdy, but I'm only about 1 day in with this so I'm interested in seeing how well it does with scratches. Everything is very clear - this is something I'm not used to as my other screen protectors are darker (to see better out in the sun) and more matte. I have yet to test this out in full sunlight so fingers crossed, but the glare is a real adjustment with lighting. I had the hardest time finding a Pixel 6a screen protector that came with anti glare (and the one I did come across charged for shipping, which I was too cheap to pay for so here I am). The only other downside thus far is that you can see smudges a lot more, which is less of an issue with my other screen protectors. It could be the quality/material of this screen protector being more glass and glossy. I guess the good thing is that you can tell your screen protector is dirty and needs a clean (or your hands do), but I would imagine I would be cleaning my screen a lot more (also not necessarily a bad thing). Glad it came with 3 protectors so there are extras if anything happens. It also came with some interesting free stickers... 02/01/2023 update: The first screen protector already cracked. Not sure how it even happened; I didn't drop the phone or anything. One minute I was finishing up at work and then I looked at my phone and noticed the crack. I must have hit it or something, but nothing struck me as out of the ordinary.

Absolutely loved it. It came with 3 pieces of glass and front camera pieces also. They made it super simple to install with the placement tool that comes with it. 10 put of 10 recommend.

It took me a long time to break my screen. Durability is strong, thickness good. Very smooth as well! Screen coverage was on point.

I ordered this screen protector for my Samsung Galaxy and it’s been a great upgrade. The installation was way easier than I expected — no bubbles, no dust trapped underneath, and the alignment was simple to get right even by myself. The material feels solid and smooth, and it hasn’t affected the touchscreen responsiveness at all. I can still swipe, type, and use gestures like normal. After a few weeks of regular use, I’ve already had a couple of accidental bumps and drops, and the protector is doing exactly what it’s supposed to do — keeping the actual screen scratch-free and protected. It stays clear too; no weird rainbow marks or loss of clarity. If you want reliable protection without compromising the look or touch of your phone, this screen protector hits the mark. Super easy install and long-lasting protection make it worth having.

I got this screen protector for my company phone - a 2025 Samsung A36 5G. I haven't tested the ability to withstand any damage, but what I can say is that it seriously affects the function of the fingerprint unlock. After I installed this screen protector I had to redo my fingerprint twice and even after that I am still only successful at unlocking the phone half the time and it is never as a result of a single action, but multiple tries. I would love to give this maybe 4 stars because the easy-installation frame is a God-send and is something that isn't widely available with Android phones. I have installed many screen protectors, thanks to my wife, and I've gotten pretty adept at doing so, but the frame removes any doubt o0r anxiety that anybody might have. But because the actual product hinders the phones functionality, I have to mark it down and mark it down hard. I don't know if this is unique to this screen protector, if this is the case with all screen protectors, or if something is just wrong with this phone, but it is what it is.