Logitech G Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones

The Blue Radius III Custom Shockmount for Yeti and Yeti Pro USB Microphones is hands-down one of the best upgrades I’ve made to my recording setup. If you use a Yeti mic and want cleaner audio with less vibration noise, this shockmount delivers exactly what it promises. Build Quality: Right out of the box you can tell this is a premium accessory. The materials feel solid and durable — it doesn’t flex or feel flimsy like some cheaper mounts I’ve tried in the past. The design is sleek and professional, and it looks great on my desk setup. Performance: This shockmount truly isolates the mic from desk vibrations. Before, my recordings would pick up every tap, keyboard click, and accidental desk bump. After adding the Radius III, those noises are dramatically reduced. My audio sounds much cleaner and more focused, which has made a noticeable difference in my podcasts and streams. Easy to Use: Installation was a breeze. It fits the Yeti perfectly and is easy to tighten or adjust. I also love how it gives a bit more flexibility in positioning compared to the stock mount. I can tilt and angle the mic exactly how I want it without any wobble. Value: For the quality of life improvement alone — especially if you’re serious about audio recording — this shockmount is worth every penny. It makes my Yeti feel like a more professional-grade setup. In short: if you own a Yeti or Yeti Pro and want better isolation and cleaner sound, the Blue Radius III shockmount is a no-brainer. Highly recommended! 🎙️🔥

A bit overpriced for a shock absorber but 100% worth it. Very solid construction, and holds the position you set it to. It deals with the daily abuse I throw at it like it’s nothing. No corners were cut when designing this.

The mount is quite a bit bigger than I expected. It seems high quality (no plastic), but I'm not sure how replacing the elastics will work in the long run. It was easy to screw into my boom arm and is rock solid once set up. That said, I'm not sure it's worth the price; at the end of the day, it's a piece of metal with elastic bands wrapped around it. This should be more like $20 but I guess they mill it out of a solid block or something so there's a lot of waste you have to pay for. Just to be safe, I would use a shock mount from the same manufacturer that made your microphone; if you don't have a Blue Yeti mic, get a different mount.

This microphone fit my blue Yeti X perfectly, at first I thought the screw wasn’t screwing in but then I pushed it a little bit further and before starting to turn it and it fit. Currently it's holding its weight well, while remaining very stable. It absorbs most vibrations when shaking the table, vibration are no longer traveling through the solid structure of the original stand into the mic. The only complain is even though it's probably smaller than the blue radius II (which I have never seen in person) this is massive and also has a bit of sag to it on the hinge but it might have been because I tried to attach the boom arm on this while the mic was still in it's original base. I tried tightening the hinge But it did not work I might have to consider super gluing it in place, which is something I wouldn't like doing. I could also consider. getting a rubber o-ring, but I would have to buy a pack of these, most of them come in packs of dozens. This is the first time I have to give less than five stars for a product from Blue.

Perfect mount for the Blue microphone

Bought this with the official Blue arm and it fit perfectly. It fit with my blue yeti microphone without any problems and it holds it up like a champ. I use it to record voice over and I have noticed a disappearance of noises whenever I bumped my desk, so it works and my audio now sounds clearer. I'd say that after seeing the improvements in audio and for the price, it's worth it.

Dear Blue, I purchased this Blue Radius 3 shock mount to go with my Blue Yeti Boom Arm and the Mic shown in my photo. It fits perfectly as I imagined because it’s from the same company. No instructions came with the box but that’s ok as it is self explanatory how it should go together. Without this shock mount I would not be able to mount my mic to the boom arm. Or at least not that I am aware of because I tried. It looks super professional even though I only use it as my main mic for work. I work from home and I needed a good mic setup to use for Zoom/Team meeting. I’m still not entirely sure why I needed this shock mount but a lot of people I’ve talked to says it’s necessary. Also, my Yeti Blue Mic doesn’t fit on the Yeti Blue Mic Arm without it. Seems like a defect in their products but not sure which is defective.

The stand works well even with a cheaper hand so it's nice

Cette suspension Blue, est de très bonne qualité, les matériaux employés, les finitions, ainsi que la peinture qui ne s'enlève pas au premier coup d'ongle venu à la manipulation. C'est effectivement la qualité incontestable d'un référent du marché : Blue. L'article en lui-même est irréprochable : Le prix est dans la fourchette du marché, et le montage sur la perche et le micro est d'une simplicité enfantine, et sa taille n'est pas imposante et ne masque pas une partie du champ de vision. Non vraiment il n'y a rien à dire, si ce n'est que je le conseille pour celles et ceux qui ont acheté un micro Blue Yeti.

Very robust. It fits well with the microphone arm (maybe a little too well, so I had to adjust the joint screw). It works as advertised, as it isolates the microphone from vibration.

Es de buena calidad ... algo caro porque no trae el brazo ... hay que comprarlo aparte ... Peto en general satisfecha con la compra

if you lash out on a good mic and do not use ot on the stand, this is a must. Mounted on the microphone beam, it is worth gettiung this device as well to stop vibraitons!!! A must have!