LOAMLINSMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

LOAMLINSMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

Q: Do these coordinators work with Zigbee2MQTT and ZHA?

Yes, all models work with both Zigbee2MQTT and ZHA.

Q: Do I benefit from using SLZB-06p7 based on newer SoC C2652P7?

If you do not plan to have more than 200 end Zigbee devices, you do not need pay more for CC2652P7 chip. Moreover, CC2652P and CC2652P7 are based on the same processor Cortex M4F 48Mhz, the only difference is RAM.

Q: Can I connect multiple adapters to the same instance of Home Assistant?

Yes, you can. You will need to run two or more instances of Zigbee2MQTT. Please check out the product manual with an explanation.

Q: Can I use “passive” 24V PoE?

Adapter supports active PoE standard IEEE 802.3af. So Only PoE routers and injectors with this standard will work.

Q: Is it possible to use device in Wi-Fi mode?

Yes, it is. What you need is just choose mode to Zigbee-to-Wi-Fi and connect to your Wi-Fi network.

Q: Are there any delays in Zigbee while using via Ethernet?

No, actually Ethernet 100Mb is much faster rather than the baud rate used for USB serial connection 115k.

Q: My Home Assistant server is located in basement. Can I put SLZB-06 in my leaving room and connect to it via Ethernet?

Yes, basically that is the point for SLZB-06: you can locate your Zigbee Adapter wherever you want and do not stick to the server. Even remote connection remote buildings works.

Q: Can I connect to type-C and RJ45 at the same time? Optoelectronic isolation at place?

Yes. The device contains optoelectronic isolation between USB and Ethernet parts. So you can plug in SLZB-06M to both RJ45 and type-C at the same time.

Q: Do I need to change powering either from POE or USB? Any switch?

No. You do not need to think about tit. No switches. Just plug in POE or type-C or both – and the device works. It distinguishes power sources and acts correspondingly.

Q: How to select mode USB/Ethernet? Any physical switches?

The device can be switched between USB or Ethernet either through a web-interface or by button. Just short press – and the work mode changed. Switching by web interface allows changing the work mode distantly.

4.2/5

产品编号: 605247963

安全交易

细节

Brand
LOAMLIN
Hardware interface
USB 3.0 Type C
Colour
Black
Compatible devices
Laptop Smart
Data link protocol
Bluetooth USB

🌐Zigbee 3.0 Gateway

📶Dual Mode Operation

🔌POE Support

经常一起购买

SMLIGHT SLZB-06M – A Zigbee 3.0 to Ethernet, USB, and WiFi Adapter with PoE Support, Works with Zigbee2MQTT, Home Assistant, ZHA

THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings

THIRDREALITY Zigbee Smart Color Bulb ZL1 4 Pack, Compatible with Home Assistant, SmartThings, Aeotec, Homey, Hubitat or Echo Devices with Built-in Hub, A19 -RGB Bulb, 2700K-6500K Tunable, 800 Lumens

描述

🔗 Connect, Control, Conquer your smart home!

REMOTE MANAGEMENT - Update your devices from anywhere, no physical access needed.
EXPANDABLE NETWORK - Easily add multiple coordinators for expansive coverage.
POWER OVER ETHERNET - Say goodbye to clutter with POE support for a clean setup.
SEAMLESS CONNECTIVITY - Transform your smart home with effortless Zigbee integration.
VERSATILE COMPATIBILITY - Works flawlessly with Zigbee2MQTT, Home Assistant, and ZHA.

The LOAMLINSMLIGHT SLZB-06M is a cutting-edge Zigbee 3.0 to Ethernet, USB, and WiFi adapter that supports Power Over Ethernet (POE). Pre-flashed and ready to use, it seamlessly integrates with popular open-source automation platforms like Zigbee2MQTT, Home Assistant, and ZHA. With dual mode operation, expandable network capabilities, and remote management features, this adapter is designed for the modern smart home enthusiast.

有问题吗？看看别人问了什么

Do these coordinators work with Zigbee2MQTT and ZHA?

Do I benefit from using SLZB-06p7 based on newer SoC C2652P7?

Can I connect multiple adapters to the same instance of Home Assistant?

Can I use “passive” 24V PoE?

Is it possible to use device in Wi-Fi mode?

Are there any delays in Zigbee while using via Ethernet?

My Home Assistant server is located in basement. Can I put SLZB-06 in my leaving room and connect to it via Ethernet?

Can I connect to type-C and RJ45 at the same time? Optoelectronic isolation at place?

Do I need to change powering either from POE or USB? Any switch?

How to select mode USB/Ethernet? Any physical switches?

常见问题

TrustPilot

TrustScore 4.5 | 7,300多个评论

安妮塔· G.

体验不错，但跟踪更新可以更好。

2 个月前

Sneha T.

我收到的产品完好无损。总体来说服务很棒。

1 个月前

查看所有TrustPiLot评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 200 多个国家/地区的 3 亿多购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

NT$5821

关税和税费包括

Taiwan店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot

TrustScore 4.5 | 7,300多个评论

尤素夫·A.

总体来说，体验非常棒。会推荐给朋友和家人。

1 个月前

Neha S.

整个订购过程中沟通顺畅。产品完美。

2 周前

查看所有TrustPiLot评论