SUNLU 3D Printer Resin 3kg, Fast Curing Standard 3D Resin for Most Resin 3D Printers, 395 to 405nm UV Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage and High Precision, 3000g, Dark Grey

Cheap and reliable resin, packaged very well. Once my machine was calibrated for this, I found the prints to have very crisp details, supports were easy to remove. I love the translucent. I alternate between blue and red, and I found that I can just mix the colors when one runs out without losing any print quality. I have also found that this material, when cured, responds very well to Dremel cutters. I did recently try the 2kg packaging, and I think I prefer the 1kg for ease of use. But price will ultimately decide what I order next. Also, I have had success adding small amounts of clear tough resins to improve the durability of my prints. But this has not been necessary for the tabletop miniatures I print.

If you are on budget, this is the resin for you. This is my go to resin even when I can afford another resin that is 8k. I t is easy use and calibrate. Prints come out fairly nice and detailed. The resin is packaged very good, it comes in a plastic bag; which is the put into a bubble bag. I have ordered a lot of this resin and have never received any of them leaking. You also get a small pack of paint filters that you can use to pour the resin back into your bottle.

I have been getting great results with this resin consistently over the past few years. I print on an Elegoo Saturn and am very happy with the quality of the final print. I believe the quality vs the price is excellent.

I purchased the beige resin. I'm a little dissapointed that the default picture on the store is indeed beige, but the actual color of the resin is a peachy "skin tone".The resin itself is thin, which is nice so that it flows well in the vat. It does require a bit more exposure time that my sirayatech resin does (somewhere around 3.5 seconds on an anycubic M3 max). That said, I had no failures out of the bottle using the default Lychee slicer layouts and supports. Lychee is nice because you can enter your machine and resin and there's a good chance it can provide a profile that will get you started.As for the actual prints, they came out crisp and clean. Though I will say the surface texture is noticibly chalky compared to more premium resins. The resin is extremely brittle. Which is typical, but not at all abs-like.The instructions warn not to leave the resin out, and if it would sit more than a couple days, to return it to the bottle. I can confirm that it starts to separate out this quickly, and when it does so, it separates like spoiled milk, with the resin looking splotchy and curtled. Not a big deal, you just have to shake it back up and its good to go. But again, more premium resins can last for a week in my vat with minimal separation. And when they do separate, usually the color falls to the bottom evenly.Overall, I'll probably purchase more of Sunlu's resin in the future. This performance was acceptable for the parts I generally produce as they need to be painted anyway. And hey, it's half the price of higher quality variants. Just make sure you shake vigorously and return leftover resin to the bottle if you're not going to use it.

So, i experiment a lot when it comes to resins and i am over trying to make my own colors using pigments and micas or other colorants. I opted for this clear green to try and color match another part i had in a similar clear green. It isnt perfect but its dang close. This resin printed perfect on the first try - granted, i dont have much experience with clear resins and i printed a new to me file for the first time using this resin. Overall, i am very happy.

Fantastic resin. flawless prints, no problems with adhesion, would definitely buy again.

This is all I print with. It produces excellent detail, isn't brittle, and has a low odor (this doesn't mean it's safe, you still need to wear PPE). The cost is hard to beat for what you get here. Highly recommend.

Good price but the resin is not good. It always sticks to the FEP, regardless of whether the FEP is new or used. I tried different settings on my Elegoo Saturn and Mars 2 Pro. But as I said, it always gets stuck on the FEP. I'm actually always satisfied with the Sunlu resin, but not with these.