Burris Xtreme Tactical Secure Reliable Durable Lightweight Shooting Optic Mounting Rings - Fits On Most Weaver and All Picatinny-Style Mounts

*In reference to 1" Medium rings.These rings are made very well. They are very beefy and seem extremely sturdy. I really like the fact that the scope is held by 6 screws per ring. It's extra security and peace of mind as your absorbing recoil. Before these I had purchased a pair of UTG rings also held by six screws that for the price, were ok but these definitely trump them. I mounted these on a Talley base and torqued them down to 15 inch pounds using a wheeler torque wrench. I highly recommend using blue locktite and tightening down using a star pattern (similar to tightening down lug nuts) when securing screws on rings. I did lap these rings before I secured my scope but it didn't seem completely necessary. I personally just like to do it because I have the tools necessary to complete the job (Wheeler Scope mounting set). Make sure you get proper eye relief and torque these down. Allow the locktite to rest for 24 hours then go send lead down range. For the price, they are a great value for any budget build.*Rings were mounted on a Talley 20 MOA slanted base and hold a Vortex Diamondback HP 4x16x42 on a Remington 700 Varmint .308** Rings arrived on time and were securily packaged.

These Burris 420180 XTR Rings (1-Inch, Low, Black) worked perfectly for mounting a Burris 2-7 x 32 Scout Scope on my Springfield M1A rifle. The mounts are acceptably lightweight and extremely durable/secure, and they place the scope as low as possible so that I can use a natural cheek weld on the factory stock, without need for a riser, to get a great sight picture through the scope. With six screws to each mount, they take a little time to set up, but once installed they're rock solid. Although not technically "quick detach," the nut-style attachment screws would make it pretty easy to pull the scope off the rail in a hurry if you needed to, but are more secure than mounts that use quick-detach levers (which, in my experience, tend to loosen under recoil).If you're needing a high quality, high durability set of rings to mount a 1" diameter scope, these are a great bet. Just make sure you get the height you need to allow proper clearance for your desired configuration.

Love these ringsVery tight and stays that way

Great rings. Nice and solid. I always true rings with a lapper and I have two pairs of these (soon to have 3) and there is little to true because they line up great. The main thing I love about these is the height. I don't know why but it is very difficult to find 30mm rings with this height (especially if you don't want to spend a $100+), which is unfortunate because I think it is the perfect height for putting a scope on an AR. Other scope ring manufacturers seem to skip this height, and their rings are either a little to low or a little to high. These are perfect for a good cheek weld with a scope on an AR.

Worked like a charm easy install Excellent product for the money

These rings are great, strong, beefy and they look good. My only problem with them is that I lacked enough information when I purchased them. They come in three sizes: medium, high and extra high. The medium will work just fine for an average scope of a bolt action rifle. The high ones are designed for a bigger scope on a bolt action rifle. But if you want to mount a scope on your AR platform you have to get the extra high version otherwise the scope will be to low to properly sight the target. The reason for this is because on most rifles the stock will slope down from the the back of the receiver to the butt of the stock, so there is plenty of room to adjust your eye to the height of the scope. But with an AR the stock goes back in a straight line and does not slope downward so you have to get the scope higher with some taller rings.

These rings are heavy duty and will stand up to some serious abuse. I needed something that would be tough enough for heavy woodland useage, and these Burris Xtreme Tactical X rings filled the need. I mounted them on a HBAR Colt Sporter (AR15 clone) with a handle mount. I was originally looking for steel rings, but these looked good and had good reviews so I bought them. I thought if they didn't work out I would just return them and pony up the couple hundred dollars for some steel rings. However, after mounting these Burris Xtremes Tactical rings I saw that they were solid as a rock and the six screws per ring were holding extremely well, I knew that I had what I needed.I would recommend them to anyone looking for a quality set of rings.

Very bulky and heavy.