BIQU CryoGrip Pro Frostbite Cold Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Super-Tack Spring Steel Sheet, 257x257mm, Room Temperature Printing, Double-Sided, 1 Piece

This is honestly one of the best build plates I've ever used for my Bambu Lab printer. The CryoGrip coating works exactly as advertised — prints stick firmly during the print and release cleanly at room temperature without any prying or flexing required. I haven't had a single issue with filament adhesion since switching to this plate, which is a problem I dealt with constantly on other surfaces. The cold release is smooth and satisfying. Build quality feels solid and the plate sits flat with no warping. If you're tired of fighting with adhesion or constantly applying glue sticks and hairspray, this plate is the solution. Absolutely worth it.

This plate has been amazing. Was having some issues either my original plate on my Flashforge AD5X after a few months so I threw this on and problem of bed adhesion were gone. PLA sticks great at around 40c bed temp and so far every has come out perfect. Almost sticks too well at times. Also I did the full calibration on my printer after installing and I fully expected to have to adjust the z height but even that worked out same as default. So far I have had no issues and would highly recommend if using PLA and PETG filament. The only drawback I can see is not being able to use IPA on it but it appears that the plate doesn’t need to be cleaned too often. I have printed on it every day for about two weeks so far and still going strong. Definitely worth the money. Just make sure to buy the right size for your machine and it fits right on the magnetic bed.

Totally worth buying. Run cooler bed temps and still get better adhesion. Oddly enough I find I get a smoother finish from this plate than their Glacier, which is labeled as the smooth finish. Awesome texture, superb functionality, and high quality steel.

I bought this plate because I had several failed prints due to adhesion problems between PLA and Bambu standard textured PEI plate. This plate works perfectly - no need for messy glue stick. Perfect adhesion across the whole surface and easy release when plate cools off a bit. I also like that it's almost smooth - with very subtle texture, and plate temp could run lower then with PEI plate - doesn't hurt to save a few buck on electricity. Have not tried printing PETG with it yet, but that worked very well with PEI.

Plate arrived very uneven and won’t lay flat, even on my glass table. I’ve tried multiple petg and pla filaments (all dried). The plate is way too flexible and is causing lifting at the corners (literally the whole plate is lifting away from the printer). This is with or without a brim or mouse ears and with 30, 40, 50c for PLA and 50, 60, 70 and even 75c for PETG (above the recommended range but I was determined to try everything before having to send this back). The texture itself is very nice and when and where it holds, it does so very well, but since the plate is so uneven, my p1s and a1 can’t fully compensate and I end up with wavy spots on only certain parts of the print. I’ve tried printing the exact same things and with the same settings on my stock Bambu textured plates and they all come out perfect, and without any flexure and all have 2000+ hours on them. I’ve ran with the print enclosed, or open, I’ve ran with and without cooling, nothing makes a difference with this plate and I’m tired of wasting filament trying to chase my tail with it. I want to like this plate, the adhesion is great, even once cooled. I watched tons of reviews and everyone said this is the one to buy, so maybe I just got a dud? I’ve emailed the company and am waiting to hear back, so I will post any updates I receive.

This build plate makes a world of difference. I've had no problems with sticking with any types of filaments. It is a thick plates, very durable, you can tell it looks like a quality plate but you are paying a good price for it, it fits perfectly on the x1c.

Bought this as an upgrade to my Bambu Lab P1S. Note that you cannot wash it with alcohol so I washed it with dishwashing liquid and warm water. The build quality seems good. You can tell it's coated with a high stick material. When the printer wipes the nozzle against the top of the plate while it's getting ready to print it did scrape away this coating. Design flaw or unavoidable? I print mainly with PETG and Bambu Studio did not want me to even try and run this at lower temperatures using the built in profile for the Bambu cold plate. I'm running it at 60 C for PETG with good adhesion. When your prints finish make sure you let the plate come back to room temperature before you try and remove the parts or they'll stick to the plate. The over all build for the money is good and I really like the blue color when picking from my small selection of build plates. I think it definitely needs to be dialed in settings wise.

Must have for a 3d printer. Has some issues with corners warping before, but never after having this product. Not sure how they do it, but prints STICK to this!! Once I started using it, I haven't stopped. Great value since it really helps keep failed prints to a minimum.

It is banded unable to use with my printer bambu lab p1s. So pls replace it as soon as possible

Buena placa, la tengo en otros modelos y funciona excelente no se despega nada

Muy buen producto