ThermoPro Bluetooth Thermometer Hygrometer, 260FT Range Temperature Sensor Greenhouse Thermometer, Remote App Control Temperature and Humidity Monitor with 2-Year Data Logging Export (TP351)

Fantastic little unit! I put this in my Hoop Coop for my hens this winter to monitor temp and moisture content as to avoid frostbite or breathing issues. I’m so happy with this product!! It works superbly!! It has a pretty good reach for the Bluetooth as well. If you are looking for an accurate and dependable tool for monitoring temp and moisture look no further. This even graphs out all the data for you to be able to monitor your daily and weekly temps. It pairs with your phone and is easy to navigate. It has been consistently below zero here and I just now had to change the batteries in it. I would definitely recommend this product.

Excellent product. I should’ve read the description better because I thought it had a barometer sensor. I have a ThermoPro indoor/outdoor weather station. The station tracks barometric pressure in addition to temperature and humidity to give an estimate of the forecast. This Bluetooth module works great, but again, it only monitors temperature and humidity, not barometric pressure. If they ever offer one with a Baro sensor I would buy it in a second! The app works great and is easy to setup and easy to read the info. Haven’t had it long enough to determine battery life, but it does include batteries that look to be decently made alkaline. You can’t beat the price for what you get, and the app is free as well. I compared the humidity and temp readings to 3 other units known to be accurate and this module was accurate to within .2 degrees on temp and 1% for humidity. Lastly, the item is small and inoffensive to look at, we have it hanging from an outdoor light.

I needed a way to monitor my greenhouse temps and humidity as I get ready for the upcoming growing season. I wanted one that was battery powered and could be read from my house (a fair distance from the greenhouse.) This does what I need as long as I'm in certain areas of my house, which is good enough for me. So far the operating temps are as described, as it recorded overnight lows below 0˚ F a few times.

This little gadget is wonderful!! I threw this in my cigar humidor and was pleasantly surprised to find how accurate it was. The app/Bluetooth is seamless and simple; I can easily pull up the app and get a reading within seconds. It feels well-built and doesn't appear to consume battery, so I imagine the AAA's will last a long time. Being that it connects via Bluetooth, you can't check it unless you're within range (260'), but that's anywhere in my house. Allows me to tuck my humidor away and not worry about it. The hygrometer is also a perfect size for my use. Surprisingly affordable and useful item!

Title: Better Than the Wall Thermostat—Real Data Where It Counts Rating: 5/5 Stars The Verdict: I use the heck out of this ThermoPro TP351. In fact, I use it so much I often forget where I've hung it. Whether it's monitoring the house or deployed for long-term camping trips, this little sensor has become indispensable. Why It Works: Real-World Accuracy: Don't trust your wall thermostat. Those units often read the micro-climate of the wall itself, not the room's actual air. By hanging this in the middle of the room, you get the true ambient temperature and humidity. The difference is night and day. Rugged Simplicity: No screen to crack, no buttons to wear out. It's small, almost too easy to lose, but that's the trade-off for a device that just works via Bluetooth. Phenomenal Range: The 260ft spec is conservative. Outdoors in the clear, I get significantly more range. Indoors, I can step outside and still get a solid reading from inside the house. Data Power: With 2-year data logging and export capabilities, this isn't just a thermometer; it's a trend analyzer. You can spot humidity spikes or temperature drifts long before they become issues. Bottom Line: This is an excellent purchase and a fantastic value for the dollar. If you need accurate, remote environmental monitoring without the hassle of screens or complex setups, the TP351 delivers. It's the kind of gear you rely on when the data needs to be right.

This Bluetooth temperature/hyrometer set up in less than a minute, maybe two minutes if you count the time it took to download the app. Batteries are included, and the app is free, with no registration required. Adding the device is as simple as pressing the + sign and selecting the ThermoPro model in the app.. I’m using this for an unorthodox purpose and something not covered by the stated usages: I hung this outside on a protected fig (wrapped in a tarp) to see whether the pipe warming cable (also unorthodox) was keeping the area above the critical 20 degrees. Even though this doesn’t state it can be used outdoor, the lowest temperature is listed as -4 F, a temperature that we rarely get in my area of PA. Probably because I’m using this outside and through an exterior wall, the range is not great. I have to be about 12 feet away inside. If I were to use this indoors, as intended, I’m certain the range would be better. Still, this is not a WiFi device. You must be within range to get a reading. The price is right, especially for peace of mind. The gauge seems accurate.

It’s good to have whether you keep it in your car to wait until it’s warm inside or you want to check to see if the drive is cold enough. This works good you can even just hang them up in rooms to adjust the air flows and keep all the rooms heating up together.

Got this a few months ago for my small pop up greenhouse so that I could keep track of data easily thru time and also get notifications if something isn’t working inside of it so I can address it before my plans croak. As far as it’s pure, physical functionality is concerned, it turned on it connected to my phone and it worked, at least at first. I believe I purchased this sometime in October or November and it’s late January right now and it has already stopped working and it’s now passed the timeframe in which I can return the product. I initially thought that maybe it was just out of batteries since it was still running on the first set That it came with, but that was not the case. I changed the batteries, but it still would not turn on after I changed the batteries. I even attempted to disconnect the device from the app and reconnect it, however, after I disconnected the device from the app and searched to try and reconnect it, the device was not showing up on the list to connect it again. Maybe I’ll try some additional troubleshooting, like uninstalling and reinstalling the app, and if I do so, I will update this review accordingly, but thus far I am extremely dissatisfied with this device. Not only has its pure functionality stopped working, it also has been historically, extremely inaccurate, up to being about at least 10° colder than the actual temperature. I have another temperature device in my greenhouse that controls the temperature in which my heater kicks on and turns off, so it has a separate temperature gauge on it for it. This device was always registering as 10° colder than that one, which was a simple metal probe type device and only measured the temperature. The inaccuracy didn’t bother me so so much, because a main function that I wanted was to be able to be notified in the event. Something inside went wrong And things started to freeze up inside of the greenhouse and having a temperature gauge that was registering temperatures 10° lower than the true temperature would only serve to notify me even earlier of any potential issues going on plus, when I would look at the data on the app, I would just keep in mind. It’s inaccuracy and account for the inaccuracy inside of my mind when looking at the data just the same as one would do if you had a clock that was 10 minutes fast or slow. I was still able to get an idea of what the conditions were like inside of the greenhouse without actually having to go inside of it and to me, the issues did not warrant an immediate replacement of this device for a new one that works properly and that is accurate. Because I keep the temperature in the greenhouse Just warm enough to survive and be comfortable for my tropical plants, to try and conserve an energy and keep the temperature on the lower side of the spectrum in which the plants are comfortable with the inaccuracy of the device was kind of a big deal. Even tho I didn’t feel it warranted an immediate replacement, the logic behind it was that “at least I have SOMETHING, and something is better than nothing for now” - as I did not want to spend even more money on getting a new one. Now that the device isn’t even connecting to the app whatsoever, I don’t even have that “something” anymore. And it’s too late to return it now.