FastCap Zero Clearance Tape - Made from Durable PVC - 2inch Width x 16inch Length, 5 Yellow Strips - 05432

A must have for anyone using a mitre saw!The tape is a good thickness, must trim with a knife or scissors, it comes with extras but I’m still on the first strip.It is easy to apply. Wipe down the area thoroughly using something like vinegar to remove any residue.Dry thoroughly. Line up the tape along the entire length of the cutting zone , put in place and press firmly working out any air bubbles.Your first cut will open up the zero clearance tape.I next added a zero clearance guide using sacrificial wood.Kick backs can be bad. Proper safety precautions can help protect the user.

Like every Fastcap item I’ve used this is a great idea. Nothing to critique, they work just like you’re hoping they will. Which is in and of itself priceless

I make small craft items & have been operating without a zero clearance insert for my miter saw. I saw these & though......perfect. I bought & installed them. The install is easy, & your insert now becomes zero clearance. The issue I has was because I cut small pieces all the time, when holding the piece to cut, the piece is not flat on the table & insert of the miter saw, there is about a mm or 2 difference in height between the tape & the table. This makes for an uneven cut......may 1/2" or less but it shows in my work. If you're cutting big pieces across the blade, it works perfectly. I ended up buying a zero tolerance insert.

This zero clearance products are stiffer than expected. Once the saw blade is raised through the product the user will have a nice surface from wood to slide across. Seems to be durable, I've been using the same one for over a year. Would buy again.

Super easy to apply to the blade slot on my miter saw.

Taped over my throat plate on my Skil miter saw. Cut back the dust and debris inside the throat by more than 90%. Seems durable. Been using now for several months with no degradation.

A generous supply if you cut it to fit your application. Great stuff, works very well. You may have to feather the leading edge, because the tape is about .008" thick.

As described