Hodedah Mini Microwave Cart with Two Doors and Shelf for Storage, White

This car I really like it's well made sort of hard to put up but I've got to feel it will be just the right size do I needed to go cuz this place isn't that big so it's one of these nice cabinets they ought to choose this one

So cute small little table. Loved it. Little unsturdy with wheels so we removed wheels. Didn’t wanted to lock on wall as I keep moving and rearranging furniture more often. Easy to install. Only cons was wrong color send. Ordered one with natural wood countertop to match other tables and windows/doors of my kitchen but got full white.

Microwave Cart ReviewItem:Hodedah Mini Microwave Cart with Two Doors and Shelf for Storage, WhitePrice:$52.99 on AmazonFor the money, this is a really good deal. While some might take issue with certain things about it, overall it is a bargain for a DIY project, if you want to get creative and make a few modifications, which I did.I would like to start this review by saying that I am blind, but had little problem figuring out how to put this cabinet together without reading the instructions. When it arrived, I noticed a fairly large gouge in the carton, so when unpacking it, took care in feeling my way around the various parts, 1 to identify them , and 2 to see what damage might have been done. Having been a former cabinet builder, it was fairly easy to figure out what went where. The damage was minor, so I decided not to bother with contacting Amazon for a replacement. Two of the damaged areas would be hidden behind the doors, and I was able to repair a small ding in the top to a point that it is barely noticeable.If it weren’t for the damage and a few other issues, I would give the cabinet 5 stars, but I would have to rate is somewhat less than that. Some might find it challenging to install the castors. If the placement of these had been marked with slight indentations for the screw holes, these would be easier to install. The same goes for the door hinges. In both of these cases, I lined up the hardware, and used an awl to mark the places where screws should go. I doubt if most customers have an Awl in their toolkit, but a nail and a hammer would work as well. I was able to figure out which door went on the left and which went on the right, by the slight indentation where the magnetic plate screw went. I’m not sure why this was marked, and not the castors and hinges.A fairly major issue is the back. There aren’t any cutouts for routing electrical cords. It seems that there should be at least 1 cutout behind the cubby hole where a microwave oven fits. Small appliances have fairly short power cords, and a multi outlet extension cord is needed in order to power multiple appliances without the need to plug and unplug them. This can cause an electricians night mare. Having fully assembled the cabinet, except the back, I debated on whether to install it or not. There were several options at this stage:1. I could leave it off, but that could cause a stability problem as well as having to deal with items falling out of the back when transporting the unit.2. I could Cut off about 2 inches of back, just below the top and that would provide a slot for passing the power cords through, but I don’t have any power tools that would allow me to do that easily. Being blind, I work primarily with hand tools, and I didn’t feel like doing all of that sawing.3. I might purchase a chassis punch and punch the holes with it, but that meant finding the proper punch and ordering it. Such punches don’t come cheap, and I would have to wait for delivery.I finally decided that I had the tools I needed to do a neat job. I could cut 45 degree triangles off of each of the 4 corners using a tile cutter that I have left over from a LVP flooring job that I had done earlier. These would be just larg enough to allow a 3 prongpower cord plug to fit through. This worked beautifully. It allowed the power cords to passed through both the cubby hole and the lower cabinet behind the doors and opened up a multiple of possibilities on how the cabinet might be used. Not only could it be used as a microwave cart/coffee bar, but it could be used as an entertainment cabinet as well.I installed the modified back with screws, rather than using the small nails that were provided. This provides a more secure attachment, and allows for easier removal and replacement if needed. In addition, I installed a power strip just below the top and at the rear with the outlet holes facing down. This provides just enough room for the power cords to be plugged in, and still allow my microwave to be installed with the front being close to flush with the front., I have room for a coffee maker, A “Hot Shot,” a toaster, a George Forman Grill, and an electric fry pan. With room for some cooking oil , a few spices, and some cooking utensils. It’s a micro-kitchen on wheels. All that is needed is a mini-fridge and some countertop space to prepare the meals.I would like to mention something related to the disabled. While some people might think this cabinet is not tall enough to use while standing, that is true. It is best operated by a short person, or someone sitting in a chair. The height is just about right for a person in the wheelchair. That might make it ADA compliant, especially with the modifications that I Made. Not only is it at the right height for a person in a wheelchair, but I am using a Hamilton Beach talking microwave oven, and other appliances that are easy to use by a blind person; No confusing touch screen displays or membrane buttons that are not tactile. It contains all of the appliances I need to be able to prepare my own meals.

Love it

The size and design are nice. It looks good and has a variety of functions, but it is a pain in the ass to assemble. A few tips: When putting wheels on, note that two have locking features and two do not, so place accordingly; you will need at least two people to holding the doors in place when attaching them to hinges (they slide around easily); lastly, carefully use a small drill or electric screwdriver to make holes for screws. The directions say not to, but most of the boards have no holes at all, so making a properly sized guide hole a few mm deep and then using a manual screwdriver would be easier. Also, if you have a screwdriver with a magnetic tip that would be ideal, so the screws don't fall off when being put into cabinet doors, since the unit needs to be mostly assembled and upright for this step.

Everything on it

First of all, I did not receive any instructions in the box this thing came in. I had to find them online and print them out. NONE of the pieces were labeled right. I had to relabel everything to match the instructions and even then it had the wrong screws going in the wrong places. The finished product is ok but it's not the sturdiest. I wish I had shopped around more.

Very nice looking and utilitarian. All instructions are clear & all parts are provided. Lots of parts, so it takes a while to assemble. But worth the effort.

This cart was so easy to assemble and all pieces fit perfectly together. I bought it for my DeLonghi Espresso machine and It allows me to store all of my coffee making supplies together. Perfect fit for our small sized kitchen. Bonus . . . the colour perfectly matches our kitchen cabinets.

For kitchen storage.Very hard to build.Very hard to align doors.Took 3 hours to build its so fiddly.And in e built I noticed there is a chip on the front door at the edge revealing the material built with below it.Very obvious colour difference !!!I'll contact Amazon.I've No idea how to put on a picture on here.Given the comments about absence of screw holes have been made quite a,lot over a period of time,Amazon should think about removing this product as the issues are not being addressed by the company !!!

Alles prima

People have been criticizing this piece for being cheap. I say that, for the price, it is perfect. You want high quality materials, be prepared to pay for them. You don't get something for nothing. This piece went together flawlessly and the instructions were very clear. If you have no trouble with Ikea instructions, this will be fine. It is holding my toaster oven, coffee maker, breads and coffee stuff. All fine.

It is missing a dowel and shelf support screw. Therefore I cannot assemble it. So it does not meet the "easy to assemble" criteria. Therefore this is not a great value for my money, in my opinion. If I cannot use it, it has no value. I did contact the brand and they said they would ship out the parts. That was over a month ago and I still have not received it.