⚙️ Elevate your CNC game with precision that commands attention!
The CNCTOPBAOS CNC Router Z Axis Tool Setting Touch Plate Probe Block is a durable, solid alloy accessory designed for precise tool leveling and zeroing on 3018-PRO CNC machines. Featuring a 40mm diameter effective surface and a 2-meter cable, it supports seamless integration with GRBL and MACH3 controllers, ensuring accurate, reliable milling and engraving setups every time.
| Manufacturer | Changzhou Rattm Motor Co.,Ltd |
| Part Number | 3018 |
| Item Weight | 2.89 ounces |
| Package Dimensions | 5.12 x 3.07 x 1.73 inches |
| Item model number | 3018 |
| Is Discontinued By Manufacturer | No |
| Style | Style A |
| Material | plastic |
| Power Source | ac/dc |
| Voltage | 12 Volts |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
J**N
Well built inexpensive tool to trace 2d and 3d objects.
Was easy to set up on my Shopbot cnc. Works as I exspected it to.
A**R
Very accurate
I set this up in a CNC mill, it repeated down to .0001” every time. The ruby probe measured .118” I would have preferred to see an even size like .200” for easier machine setup. The ruby probe should remain stable with temperature fluctuations. I use them all the time on the CMM
R**S
Does not work at all. The circuit is broken.
The circuitry appears to function for a minute or two, but after this time it drains the CR1632 battery completely. There is no on-off switch, but even if there were, this would not be acceptable. Also the battery holder was incorrectly soldered.
K**E
n/a
n/a
J**O
Cheap
Not as advertised
H**S
Very good idea
It does work even on wood and plastic, a bit of a setup curve but worth it, definitely a good idea and a nice time saver
B**R
Does the trick!
The perfect size means that the tool Z centerpoint is known perfectly without any guessing. Sure, you could build this simple device relatively easily, but my time is worth more than the low cost of this item, which quite simply does that job it's supposed to do.
E**N
LED is not very visible
Seems to be fairly well made. However, the LED is not very visible at all due to how it is positioned in the housing. It does not reflect very well through the acrylic light pipe portion and appears quite dim. It is not very visible at all. Especially being red. They should have made the LED green so it would appear much brighter to the eye, or added a buzzer. Using in a bright shop will require careful attention to the probe to ensure you see it light up. The other downside is the housing is aluminum. I knew this before purchasing. It will grow and shrink with temperature changes and may cause some accuracy issues. Just be aware of it.
