Single Turbo Hotparts Kit Turbocharger Vortec V8 LS 4.8 5.3 6.0 Silverado Sierra

Turbo side manifold wasn’t cleaned up. Not even enough room to get the spark plugs in hopefully they will refund me.

Update: Fitment was good. Not great. Manifolds fit perfect but cross over pipe barely fit had to bend flex pipe quite a bit to get flanges to line up. Because of this, the flex pipe is already leaking. It’s been less than 1000 miles. A big positive is the fact that there is plenty of room for spark plug wires. I’m going to put some protectors on but I’veBeen running it for a while no with no issues.Original Review Price was decent. Drivers side is a aftermarket replacement for stock manifold. I’m happy I looked into it to try and remove poor casting marks. I found about a foot of 1/8 inch wire material lodged inside and attached at some points. I guess I shouldn’t expect much but the thing was 600 bucks. It’s only couple bucks cheaper than hooker manifold and cross over. I have a feeling I will need to do some grinding on runners to install manifold bolts. Will update once installed.

Overall was not nearly as dirty of a casting as others have had. Super happy with it. Went into a G-body with a few extra cuts in the crossover. Also cut and rotated the flange on the drivers side manifold 90 degrees to make life easier. Also would just immediately block off the WG mount on the cross over.

Fits pretty well. Doesn't include hardware for mounting the turbo or the crossover at the 3 bolt flange. The kit is well worth it if you are willing to put in some work.

I installed it on a 4.8 Silverado. I also installed a t4 to t3 adapter and the turbo still fit. I did have to remove the oil filler neck and just screw the oil cap directly into the valve cover.

I use this on my 2004 GMC Sierra 2500 HD although I do not have pictures right now the project is really great! If you should ever run into a problem they are quick to fix it :-)

really decently fitting kit! Went into a 68 c10 4.8 ,vs racing denmah kit, ended up using stock manifold on driver side. wastegate on the exhaust housing. fits great

Recieved the product faster than other items I ordered before this product and this product was much heavyier.