3D One Car Scratch & Swirl Remover Hybrid Rubbing Compound & Polish Buffing Compound for True Paint Correction 16oz Made in USA

I paired this with carpro reflect after to achieve the shine I was looking for. Extremely happy with the results, 3D even removed a scuff/large scratch I had in my front bumper. I opted for 3D all in one since I didn’t have deep or severe scratches in my paint to begin with & didnt want something too abrasive. Easy to use & doesn’t dust

I’ve used many products over the years, this is excellent coupled with an orange pad. Swirls gone, no dust and finish is as new. Well done 3D

I really like this product! I actually use it as the middle step for paint correction of new paint. After sanding with 2500 grit paper, I use 3D's ACA 510 with a wool or course cutting foam pad first which leaves holograms behind. Then I use 3D One with a medium cutting foam pad and DA which removes all the previous holograms. Then, I use AAT 505 with a fine foam pad which removes any remaining halos from the 3D One (if any) and leaves a coat of new-paint-safe protection. However, I really could stop after the 3D One step. There are maybe the slightest halos left but I use the AAT 505 more for the wax than the correction. I could also use One with a fine finishing pad for the last step instead of the 505. The 3D One will NOT dry up so I can do the entire body panel at one time. I also add a little One when cutting with the ACA 510 because that will dry up too quickly sometimes. The 3D One will not buff out 2500 grit scratches no matter which pad you use so it's not a replacement for the 510, but it's perfect for getting out any left behind blemishes after going over the panels with a sun-light. Since it doesn't dry up, it does start to sling little drips everywhere. However, it does not dry white and easily wipes off of black trim and rubber. It takes a lot of wipes to clean off because it doesn't dry but it's still minimal effort, you just have to keep using fresh towels. I've also used it on old paint in good condition that had bad swirls from many trips through the car wash and it worked great.

Doesn't get that get that juicy finish but does give a good finish. Found myself wanting more cut to get scratches and holograms out of there. It doesn't get the haze and some holograns all the way so that's what I meant not juicy. But for quick correction or if the paints not to bad I think this is a time saver and turns out great.I just need more products to support this one like maybe heavier cut for spotting or maybe Speed to follow. Some days paint doesn't want to do exactly what you want it to.It doesn't come off of black plastic very well. Vinegar seems to do the best at getting it off.

If you work on expensive firearms this is a great product. So let me explain. I accidentally dropped a Browning rifle and put a dent in the stock. Worse, it is a high gloss urethane over expensive grade wood. Well I almost had a heart attack right there! The dent didn’t go to bare wood so I was going to be working on the finish only. Doing some research on how to fix the damage I ran across another gun enthusiast who suggested it might be repaired with rubbing compound. I started by using 0000 steel wool which smoothed out the worst damage but left a dull spot on the shiny stock. I finished by using this great rubbing and polishing product. The results were amazing. Ok, it didn’t take out the dent. BUT you can hardly see any of the initial damage. In fact I have to run my finger over the area to find the divot. Plus the gunstock is as bright and shiny as when it left the factory!

Worked like a charm, easy to apply.

This stuff didn't work for me. I tried rotary and orbital, experimented with speeds and different pads, but at 70 degrees ambient in a shady shop it dried into a hard brown sludge with very little polishing. McGuire's Ultimate worked great under the same conditions, taking 2000 grit sand scratches to perfect gloss in two steps without changing compounds.

This is the BEST paint enhancer i have ever used. It will bring out the deep color of your vehicle, while still getting out surface scratches easily; and can get out deeper scratches if you wanted to take more time on those. AWESOME stuff and must have if you are into detailing