Knife Pivot LubeOriginal Knife Oil for Blades, Synthetic Pocket Knife Lubricant, Knife Honing Oil for Cleaning Knives, Premium Knife Oil Lubricant for Blade Care, Precision Knife Oiler Bottle (10ml)

This is the right way to lubricate a knife pivot. I was using mineral oil thinned with mineral spirits, and it worked fine, for a while. I only bought the KPL out of curiosity, and to get the needle-nozzle bottle it comes in.So I disassembled my edc, cleaned out the dirt and oil, and reassembled. Then I put a drop of kpl at each bearing, and where the lock-bar meets the blade. It works as good as my old oil (the action couldn't be any better), but it seems to stay put better. I didn't have to wipe away any excess oil, and there is still (after a week of use) a visible bead of oil near the lock bar.It doesn't just work well for pivots, but also any other places on the knife where metal slides against metal under pressure, such as lock-bar or lock face, or the detent ball, the dimple it rests in, and the track it rides. Lubricating these areas can help keep your detent snappy, your lock-up strong, and your action even smoother. It will also reduce wear on these areas from consistent usage (for those who like to fidget).This stuff stays in place so much better than other oils I've used. It works better on the non-pivot points than my other oils. As a bonus, it has almost no smell, and the light smell that it does have is actually pleasant. It seems pricey for a tiny bottle of oil, but consider these things:-It has a needle-nozzle for extremely accurate application (none wasted. I've oiled about 10 knives and the bottle still looks exactly the same)-It stays where you put it (long lasting).-It may actually help preserve the life of your knife parts.With these factors I expect this bottle to last a very long time, and save my knives some wear, so it was definitely worth it.

The media could not be loaded. So, this stuff is not magic. I know it sucks to hear, but this isn't going to take something with terrible action and turn it into friction-less perfection. However, it is probably the best stuff you can buy for knives that use bronze washers instead of bearings. See on bearings the smoothness of the knife is more dependent on the bearings themselves, adding better lube smooths things out slightly but doesn't change all that much.HOWEVER, on bronze washers the lube makes all the difference. The standard high-quality stuff is usually considered to be the 10-weight nano-oil. This stuff is closer to 18-20 weight, and it just works better for bearings. The higher weight gives it a slightly higher viscosity and allows it to stick to everything much better, and if you are coming from the stock grease many companies like Spyderco use this will make a huge difference. For example, my Spyderco PM2 came from the factory stiff, it didn't fall shut like others I had handled, and if I loosened up the pivot, I would get smoothness, but introduce side to side blade play.So, I bought some of this, took the PM2 apart, cleaned everything with alcohol, and then added a few drops of this to the washers. That made a 100% difference. Now I have the pivot tight, the blade perfectly centered, and it glides open and falls shut. It literally turned the knife from stiff and crappy to having a perfect action. I quickly put this in all my knives with washers like the Spyderco Caribbean, Benchmade Contego, and ZT 0850. On all of them it made a noticeable difference, not as dramatic as the PM2 but an improvement as you can see in the videoSo, in conclusion, if you have a lot of knives that run on washers, this is your best bet. It even has a pleasant vanilla smell and not a foul odor like most lubricant. It is higher weight than nano oil and seems to give a smoother action. For knives with bearings...you are probably better off saving money. Bearing knives will work with reel oil, mineral oil, anything really and feel the same...so save your money.

I've been cleaning (restoring is too fancy a word) my grandfather's pocketknife, and oil was my final step. This was the PERFECT product for what I needed. After a couple drops in the joint of each tool the action is so smooth, this really made a difference. Unless you have dozens of knives, this is probably a lifetime supply. After grandpa's, I oiled the half dozen others i have, bottle is still essentially full. String recommend.

This is probably the best stuff that you can get. It’s easy to use and to apply and it should last you quite a long time as you need very little to actually achieve the desired effect.

Seems to work as advertised. Time will tell

has a nice needle dispenser and plastic squeeze bottle works great use it on a lot of my knifes.

Great knife oil, I use it on my collection of premium pocket knives, a little goes a very long way. I won't run out any time soon.

Knife lubricant reviews are splitting hairs on a gnat, but this is my go-to lubricant for my knives. It always keeps them running as smooth as butter. Amazon did a great job, fast shipping.