🔨 Sand like a pro, finish like a master!
The SPTA Mini Air Sander is a professional-grade air eccentric grinder designed for precision sanding and polishing. With a compact design and lightweight aluminum housing, it offers low vibration and easy one-handed operation. This versatile tool is perfect for spot grinding on various surfaces, including wood and furniture, and comes with a complete set of 12 mixed grit sanding discs.
| Manufacturer | SPTA |
| Part Number | Voviee-85 |
| Product Dimensions | 16.48 x 7.62 x 8.99 cm; 800 g |
| Item model number | OASOSS3SET-1/4 |
| Power Source | Compressed Air |
| Item Package Quantity | 1 |
| Grit Description | Coarse |
| Included Components | 1 set of air sander |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 800 g |
P**E
Great value kit.
The tool works fine, and with the extras, its great value. Very pleased with the purchase and would recommend.It could do with some decent instructions though!Just make sure your compressor is up to the job. You need 4 cubic feet of air per minute (113 litres). Your compressor should ideally be capable of at least 50% more, or it will struggle and you'll have no power (Hence the other review!) Some smaller compressors won't have the puff.The little tool (mentioned in the same disgruntled review) is to lock the spindle so that the disc can be tightened or loosened. It fits into a little hole just behind the disc, opposite the trigger. There are two holes, its the one nearest the disc. You need to rotate the black "hub" to line up the holes, not the actual disc, or central spindle).Its a bit fiddly till you get the hang of it.Once you've worked that out, the tool works fine and the tool has plenty of power. Its a bit noisy (air tools are!) so you might want ear defenders or earphones etc.It comes with a connector "tail" , but unless you have the matching female connector, you will probably need to get one. You need a male 1/4 bsp fitting on it.Hope this helps.
M**R
great item cheers.
great little sander/polisher works great and does the job.
W**7
Seems well made
Seems to be solidly built, but no mention of a warranty.Instructions are really poor - particularly in relation to locking the spindle when needing to change the backing pads, which involves holding the trigger up while using the "bar tool", as they call it, to turn the inner structure around until you find the hole to insert the bar tool in, it's a right fiddly job, and appears to be an afterthought in design - see attached pic.However, the sander works well enough, and if it proves over time to have some durability, then I would think it's a good buy.If it wasn't for the "dog's dinner" of a spindle lock, I would have given it 5 stars.Amazon delivered within 24 hours of placing the order, so 5 stars for that.
N**6
Looks good
I haven’t had a chance to use it yet but it looks well made. It’s light weight and fits my hand perfectly. It came with several sanding discs of different grades and should be just right for small sanding jobs.
M**K
Great little air sander
Comes with different size heads. Easy to use
R**R
Great little DA
This little DA works really well, ideal for the tight areas. Makes short work of areas that you would usually hand sand.Different size discs easily changed using the pin provided putting it through the small hole in front of the trigger and locking the disc to enable you to undo the disc
C**E
smooth
smooth
S**B
Nice tool but high air consumption
It's not bad sander, perfect size for small repairs to panels etc. but it's uses a lot more air then 4cfm, I have a 3hp compressor which has an output of around 9cfm but it can't keep up with this sander ! As I'm only doing a few small areas waiting for the tank to refill isn't a big problem but it was unexpected given the quoted air consumption. As others have said the instructions are useless but who reads them anyway.
