3D Printer Filament, Fast Change Rainbow PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA Rainbow Multicolor
| Manufacturer | iSANMATE |
| Brand | iSANMATE |
| Model Number | PLA-Fast-Rainbow-0 |
| Manufacturer Part Number | PLA-Fast-Rainbow-0 |
| Manufacturer | iSANMATE |
P**E
Bueno y bonito
La transición de colores es larga pero una vez que se da es de forma degradada lo cual me gusto mucho, el filamento es muy bueno y no hubo que hacer ajustes, utilice los parámetros que venía utilizando para PLA y no hubo problemas.
S**E
Buen material, sin problemas hasta ahora.
Se adiere bien a la plancha de la impresora.
D**N
Too much of each color before changing.
You can literally do 2 or 3 prints before the color changes (depending on the size of your print). A color change filament should change every meter or so to have any "rainbow" effect. The filament itself is good, the distance between color changes makes it useless.
S**S
It's my Go-To
This is what is usually loaded on my printer. The length of each color seems just about right - big prints will each have a nice gradient, and even between smaller prints, the color change happens at a frequency where I get a different color every print. The picture dragons were printed right after another, and they're quite distinct.Some gradient filaments have a problem where the in between colors turn a bit muddy - not so with this filament. It's vibrant through and through. The spool itself looks like candy.You'll see some stringing in the photo, but I have humidity problems in my print area so it's inevitable for me. If you keep this filament dry, it prints perfectly fine.
J**S
Good quality, when it prints. But really sucks when it doesn't.
The product does not adhere well to the hotbed. I had to crank the bed temperature up to 60 or 70 in some cases. As well, I had to increase the nozle temperature by about 10 degrees to 200 / 205 to keep in flowing. It starts off okay, but on a long print you wake up to a tangle of spaghetti. When it did print, the results were really nice. But success happened less than 20% of the time.I tried using painters tape and a glue stick but the filament did NOT stick to the painters tape and I had only some success with the glue.I ended up using it on small prints and so nothing ever printed out rainbow-like. Sadness.Also, it would be nicer if the colour changed more frequently. As it is, it takes a long time to get any colour change on prints that are fist-sized or smaller.Money spent on this is wasted.
