IAMAUTO 062171 Compatible with 2020-2022 Ford F250 F350 Super Duty Tremor Front Lower Valance Panel (Approx. 2" in Height) for Tremor Edition (Will NOT Fit Any Other Year Models)

Fit my 2020 f250 perfectly and looks way better than stock.

Product has a fit and finish that matches OEM, I am really happy with the way this turned out. I included pictures of both before and after. It clearly fits non-Tremor trim levels too, so the Ad was misleading.No instructions included in the box but it is fairly simple.Tools I used: M12 Ratchet, M12 Impact, 8MM shallow socket, 18MM shallow socket, 3/8 swivel, 6” 3/8 extension, zip-ties and dikes.Install instructions: The Milwaukee ratchet with the swivel easily gets the hard-to-access top 8MM bolts (3 per side). Once the stock valence is removed, use the 18MM and impact to remove the four bolts per bracket shown in Pic #2. There are two per side per bracket. (Breaker bar may need to be used to break these loose, the M12 impact fits but may not have the req’d torque). In Pic #3 you can see I zip-tied the loose loom through the holes the bracket bolts passed through. I didn’t like how low the connectors hung. The new tremor-style valence may be installed the reverse of how you removed the stock valence. **The three top mount corner 8MM bolts require you to re-use the stock retainer clips on the new valence.** Once installed, the connector has two zip ties on it that should reattach to the bolts you’ll find closest to them to ensure the loom is secured around the frame.I think I covered everything in this review. Great product. Would recommend as an alternate to OEM. Very happy with my purchase.

Good fit

it really is a simple swap and looks great! well built. Rigid not flimsy like others i ordered. fit was great1

Fit and finish is excellent. The original valence was cut to fit my snowplow mount, Western, and looked ridiculous. This Tremor valence fits perfectly above the mount, nice and clean.

So I really don't do reviews. However this item is worth it.There is a review on here that gives very good instructions on how to remove an install this valance. But crawl under your 2022 F250 and you'll know what to do.It took a 18mm, 8mm wrench and a 8mm socket with a impact. With in an hour I had removed and installed the new valance.Looks much better than stock. You can see all the other pics on here. But truly doesn't look as good as in front of you!

Pretty happy with this purchase. Good quality product that lines right up with factory holes. Very simple install that took roughly 30min with the right tools.

Nice look on the F-250 makes truck stance look higher compared to stock valance also the fit is spot on just like the oem part