2 Port 22mm or 28mm Motorised Zone Valve Head Can Replace Honeywell V4043H1056 V4043H1106 V4043C1156 V4043H1007 V4043H1080

I swapped out (yet another!) dead 'Honeybad' valve with no problems whatsoever. Functions well. Looks like it will last as well as, if not longer, than the original.It is physically and electrically compatible with the 'Honeybad' product (the cheap gear mechanism is what usually fails in those - terrible design IMO).Note: get a qualified electrician to do the job!Buy hey... tips:**** Note: Do this at your own risk - get a qualified Electrician to install, check etc. !!!!SAFETY: ALL POWER OFF FIRST!!!Swap out the old for new, matching colour coding of wires. Take a picture first, to show original wiring!If the connection point has poor access, or is just crammed with other wiring, consider adding a 'flying lead' box to ease changing over valves:- The lead on old, inoperative valve was cut near the valve, stripped, and rewired into a...- Honeyw*ll terminal box (2 x 6way terminal blocks - so enough for 2nd valve when it fails!)- The new valve was then wired into the terminal box, like-wire to like-wire.This leaves the original, more complex wiring box, untouched. This is especially advisable if you have several zone values in addition to a hotwater valve. On a previous failure, the original terminals were crammed on my system and it was very difficult to remove individual wires and then try and insert new ones, whilst keeping other wires in place!**** Reminder: Do this at your own risk - get a qualified Electrician to install, check etc. !!!! :)Other tips:I found no problems - but do DOUBLE-check the connections - including INSIDE the valve - especially the Earth!!Don't cover the valves - they get hot as it is.Use minimum force to manually operate the valves - that mechanism is the weakest part of the design (both old and new)!Enjoy!

I have a dual zone heating set up and the downstairs valve head stopped working which meant heating wasn’t coming on downstairs. Got my local gas safe engineer to replace it for me. Took him 20 mins and it’s been working perfectly since (been about a week so far).So glad this was only £25 on Amazon. It costs much more in other places like B&Q and Screwfix.

This seems OK and if still working in a week or so, I may well order another as a spare. It fitted on the pipe body part readily enough, the only difficulty experienced was refitting the cover to it, which took a few minutes to get lined up and pushed home without trapping wires (wrapped around motor body) and to engage the correct parts at each end. This MUST be done with power off (just in case) as (unlike the motor body I removed) this one has no separate earth bond wire to the cover. Deducted a star for these two points.

Arrived quickly, easily fitted

It works and it is cheaper than the original part.

Purchased last year and fitted last week for the swimming pool opening.Since my electrician fitted the Honeywell Motorised Valve replacement it only operated for 3 days before failing.The brass pinion has deformed, resulting in the valve not fully opening, thereby not actuating the micro switch to power the boiler circulation pump.Very slow actuation and the return spring appears to be too strong for the motor - (significantly stronger than the Honeywell MV it replaced) - causing the toothed rack to spin the motor furiously and only stopping when the brass pinion hit the stop - resulting in the deformation of the pinion.The Honeywell MV worked faultlessly for17 years before failing.Tried ringing TEAM-SUPPLIES to discuss before posting, but without success.Will be returning the MV for a fulll refund.

The bad news is these usually last 18 months to 2 years.The good is after fitting the first (of this brand) following replacements are quick and easy to fit as it connects to the junction box via a socket which means it's just a case of unplugging the failed unit and plugging in the new one and saves wiring in each cable individually every time it fails.

This was the perfect replacement for my Honeywell 272848 motorised valve. Delivered the next day exactly as stated. In, working, and hot water restored. Thank you very much indeed.