CO2 Regulator to Nitrogen Tank Adapter

Works perfect allows me to switch my nitrogen cylinder back and forth between co2 and nitrogen gas!

Leaks like crazy on a KOMOS brand nitrogen tank. Hope this saves others some time and annoyance.

This is a really nice piece. Saved buying an extra regulator.

Good product and quality made.

Works exactly as expected and the vendor was great and took care of me when i had a slight issue that was not their fault.

I installed this to run nitrogen on a keg setup. Everything fit, but when I did a pressure check the soldered portion by the CO2 end had a slow leak. After a little investigation I discovered that portion is very fragile and the solder will crack an worsen with very little strain. I was able to re-solder the fitting and it works fine now, but be very careful when installing this and make sure you use two wrenches to minimize the risk of putting excess strain on the adapter.

Works perfectly! Very impressed with this product!!

Worked fine for about two months then dumped a 10lb cylinder. Checked the whole setup and there is a leak when the nitro part meets the shaft. Tried tape and a strong tighten and it still leaks.