HUANUO Dual Monitor Stand for 13 to 40 inch, Premium Dual Monitor Mount with USB, Height Adjustable Monitor Stand for 2 Monitors, VESA Mount with Clamp/Grommet Base, Each Arm Hold up to 26.4lbs, Black

Trust me when I say these are ROCK SOLID, tough and well built. I've bought plenty of stands, mounts and fabricated metal that didn't work out so well. This mount NAILED IT.Pros:1) They are extremely durable and manufactured with high grade aluminum.2) One of the videos on this site shows a quick demonstration of putting them together but weread the directions anyways3) It has built in wire management (that I didn't use) that will help you conceal wires4) Comes with (2) USB (A to B) cords if your monitors support that (mine do)5) Fairly easy to put together and NOTHING is loose fitting6) Screws and hardware are well manufactured and not cheaply made7) Will support up to a 35" monitor (mine is 34" widescreen)Cons:1) The Vesa mount adapter (part# 07) that connects to the upper arm (part# 06) is EXTREMELYtight. You will have to muscle that in (carefully) but it will snap into place. It really takes somedoing.If I had to rate this mount on a scale from 1-10 (ten being best) I'd give it a 9.5. The mount is extremely well made, has all kind of angles that can be obtained, easy height adjustment via a screw, and is very supportive of my MSI-GSYNC 4k Monitors. If you need a dual monitor stand that supports up to 26lbs then get this one. I've seen a lot of monitor stands that are rated for weights just under 20lbs and this is one of the only ones that I could find that are rated over 20 and up to 26lbs.This mount is a little more expensive then most of the dual mounts but the difference is this mount holds a few more extra pounds and is extremely durable and well made.

I was extremely nervous about setting this up for a couple different reasons.One, my desk has a decent amount of weight already on the back end, so I was concerned the extra weight of my monitors and the stand might overdo it and cause issues. However this was not an issue. I did have to do some slight modifications to get it set up to my desk, but they were pretty specific to the desk i was using, as it had a cable management tray on the back side underneath and a not very well attached back piece that made mounting this unstable. After removing those two thing, it fit nicely.Setup was about as good as i could expect reasonably for something like this. Instructions were very clear, everyuthing very well labeled, and anything i might need included(other than a drill if you are looking to not use the clamp., that being said its nice they included the option for either mounting system)Sturdy?? Oh as hell. This thing is holding a decently heavy 28" as well as my other lighter 27" no problem. My old mount struggled to hold the weight of my 28" but this one handles it like an absolute champ!!! And it still has such amazing range of motion withjout creating any issues whatsoever. Part of me was hoping I may be able get my moniotrs vertically aligned but sadly not really an option. Not really at fault of the product as it was not intended and I just hoped it would work lol, so cant knock off points for that.Incredible product, im super ecstastic to have. My old mount took up so much desk space and im so happy to not only have reclaimed it but also made quick adjustments so much easier for me. Perfect for moving it around based on what im doing or playing. Couldnt be happier!!

I rarely review but I am still pretty giddy on this purchase. I recently got a new 34" acer curved monitor to replace my 30", thinking that we would repurpose the old one somewhere. This was considering almost all arms could not handle over 32". I researched more and found this and could not be happier! The construction of this is top notch and feels like a $200 model due to the mostly steel design, double latch, and excellent gas arms. After realizing I could still use my old monitor I bought and prayed that it was not a budget item that skipped corners, and I was happily rewarded.The instructions were very clear to install, and the USB cables were included which contradicts some other reviews (I did not need so would not care) . I did 4 turns on the gas arm before putting the big monitor on. and it was perfect tension (default is 11lbs). I use a standing desk on my antique desk, and it worked perfectly even with the smaller space. I can now use either way with out adjusting. The angles are great once you tighten and stays level after that.Here is one tip: After installing the base, Install the monitor bracket next, then the gas arm. Tighten enough where is does not swing. Then all you do is plop the monitor with the arm on the extender arm and you are good to go! Much easier than doing the monitor bracket last.Bottom line, it works great and looks great and can handle a 34" and 30" monitor with ease. And don't forget to install the free power toys' to make custom window snapping like I use! If you have any questions would be happy to answer.

Attached a 34" ultraHD curved gaming monitor plus a 24" HD monitor, arranged with the 34" on the bottom, the 24" floating above (centered or to the left). Relatively easy to adapt to varying configurations, with the whole stand being very solid. One star off for challenges with centering, and I had to fashion a base to raise up the whole stand by 1.5" (this allowed me to raise the gaming monitor up off the desk slightly), and add a block for stability for the clamp under the desk. Again, not a deal breaker, but expect that you will have to do some modification to the base to make it work the way you want it. For the pricepoint, very good value, and I would buy it again. Increase the length of the arms, and it would be a five star device.

This mount is fantastic - it holds up my 32" OLED and another monitor without any issues whatsoever. Easy to assemble and the cable management channel is much easier to take on and off than the previous model I had.