Swedish Ladder,Gymnastics Stall Bar, Wall Mounted Pull Up Bar- Solid Wood With11 Strategic Rods-86.6 Inches Height, 32 Inches Width, Indoor Gym Workout Yoga

Was better than I expected

So the wall brackets are NOT made to fit United States 16" wall studs. The supplied drywall anchors were comical and slide right out of the wall.I ended up fashioning my own wall plates and anchoring THOSE to the studs. Then I drilled in the stall bars frame into my wall plates so my anchors are only about 1.5" deep instead of 3".I am afraid to use the supplied gymnastic rings since I hear A LOT of creaking and buckling.I would not be surprised if this whole thing ripped out of my wall under duress.The rest of the assembly was cumbersome and the directions didn't recommend any tips like how to lay the pieces down in order to achieve best for without angled joints.The supplied hardware was useless and I ended up using a ratchet set and a power drill to much success.I painted my frame a matte black to achieve a richer more "Rogue" style gym.Overall, this would be great for stretching, light gymnastic work. (Pull ups seem sturdy) and maybe some band workouts.I can't say I would recommend for serious home gyms but it's fine for light recreational use.

So happy to have chosen this swedish ladder!It works perfectly for our needs!You need to be a strong person to assemble it alone ... but 2 people can manage it well.Company has a wonderful customer service. I was asking for enforcements which didn’t arrive and got it right away. Btw .... this additional enforcements are on the picture for the new ladder. I got the old one, where those enforcements wouldn’t be necessary. Anyway I got it and drilled some wholes to place it.So glad that there is still existing good ‚old fashioned‘ customer service! Thank you

Hello it is missing the manual to build

As some other reviewers have mentioned, there were definitely some issues here:1. Nowhere in the product description does it mention a specific type of wall. The holes in the brackets do not align with standard studs, so if you just follow the directions you'll have a loosely mounted stall bar that wouldn't hold a toddler.2. The exact number of screws are provided, but unfortunately one of them was defective. This leads to my next point...3. Be ready for a Home Depot run! Purchased three 2x4s, some 4" screws, and some patches to clear up the first attempt to mount this guy without the extra gear.Due to past experiences, I expected a scam, and for no one to respond when I voiced my concerns. However, customer service was prompt and very nice. Also, the quality of the wood is excellent, including the rings that come with it.Bottom line is there is not a price point anywhere near as low this one, BUT you need to offset this with your $35 worth of your own shopping trips. You also need to be fairly handy to figure this out - nothing too crazy but also important if you don't own power tools or have to mount several of these.Depending on your situation, you are looking at a one star or a five star item.

Looks great, works great. It took my husband almost 30min + to put together. Everything aligns well. You just have to remember to tighten the bolts in a X pattern to align everything well. I was scared it would not hold my weight or my husband’s, there was no issue at all! It held great. Looks amazing in our gym room. I’m very happy it came with the rings and the rest of the equipment. It’s such a great purchase

Does take a few minutes to put together, but nothing to complicated. Been using for a few months (along with my boys) - seems to hold up pretty good. Im 6'4" 205 and it works, steps/wood is holding my weight, etc. I use rubber bans on this as well, very helpful during a workout. I have it in the garage, mounted 2x4's horizontally across the studs, then mounted this ladder on the 2x4s...works well structurally.

First impression out of the box(s). I purchased two Bar Sets, was that it appeared to be good quality. These were the things that were disappointing: 1) One set of the screws that connect the middle bracket to the wall were missing and the the holes in the wood frame were not pre-drilled. This was on just one of the two sets. Had to stop the install and go to the hardware store and buy the necessary wood screws. The dimensions of the wood 2x4s are not exactly the same, so the joint between the upright frame and the angled frame is not precise. Additionally, there is a gap between the upright frame and the angled frame as can be seen in the included image. Overall I'm am pleased with the purchase.