Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x2.0mm. Excellent Heat Conduction, Ideal Gap Filler. Easy Installation.

You want cool memory and your cooler has the extra thermal headroom? Go for it it dropped the mem temps down 11-13 degrees down to 74C. Its even sweeter on clearance.

I replaced the pads on my Zotac Trinity OC RTX 3090 as well as the thermal paste due to really high temperatures.I purchased 2.0mm for the die side. These pads worked out great.I also purchased 3.0mm pads from NAB Cooling for the backplate. (Pretty sure they come from the same factory)I would however not recommend 3.0mm on the backplate side for this specific card, the original pads are only 2.0mm. 2.5mm should be better. The 3.0mm bend the plate a little more than I would like. Though this is not an issue with these pads, this is simply due to a lack of information online.See the MAX temps in the photos.The Temperatures are after running MSI Kombustor for 10 Minutes.Photo 1: Before Thermal Paste and Pad ReplacementPhoto 2: After Thermal Paste and Before Pad ReplacementPhoto 3: After Thermal Paste and Pad Replacement

These are good but you don't get that much for the price. Also, they are making them very hard lately. They used to be softer.

The Gelid Solutions GP-Ultimate 15W- Thermal Pad 90x50x2.0mm is a highly rated pad that's known to be more supple than most thermal pads.I had an EVGA 3060 GPU that I needed to replace the memory/VRM thermal pads on so I ordered this Gelid pad. A sharp pair of scissors is helpful to cut this down to size and not tear the material. The packaging details a performance test on the temperature when a 1mm pad is compressed to 0.6mm between the CPU and a CPU cooler (which is very atypical) but that is helpful for understanding how "squishy" the pad can be vs other thermal pads you might encounter.Price being relatively high and confusing, non-reclosable packaging is why I rate this at 4 stars. The package appears that you can tear out a perforated slot and slide the thermal pad out, but this 50mm wide pad is too wide for the opening and you actually need to tear through the sides a bit.

It was easy to cut to size and this packet was all I needed to apply it to my Zotac 3090. Temps have come down some (note the old stock padding was used for mining for years before I bought the card used). Happy with my purchase.

Product as described

I replaced the VRAM thermal pads on my 3080 ti with these 2mm pads, and 1.5mm pads on everything else. I also used Thermal Grizzly Kryonaut on the gpu dye. When dual mining Ethereum and Alephium, I had to limit the power draw of my card to 65%, and the vram would still hit 92-94 C. For reference, I was getting about 55 MH/s on ETH and 400 MH/s on ALPH. After the pad replacement, I can run the card at 100% power limit and with a slight overclock. VRAM has been hitting about 80C max, and I now get around 75 MH/s on ETH and 1.4 GH/s on ALPH. Can't recommend these pads enough.

Added to my 6650xt. Applied to Front and back of the VRM and RAM modules. Lowered temps by 10c, and keeps everything running under 60c. OC’d to 2350mhz