FINTERRY Silicon Pad Replacement for Hyundai i10-ix35, KIA Carens-Sorento, 3 Rubber Buttons Material

Perfect fit for a Hyundai i20 key. Highly recommend going to the extra effort of carefully removing the plastic tray from behind the old rubber with a small flat head screwdriver and snipping off the excess plastic around the clips then wrapping this around the tray and clipping back into place. Gives a great finish and looks like a new key. Just remember to clean out any old rubber whilst all of the parts are removed to ensure everything sits properly. If the rubber sticks up slightly, one of the clips probably hasnt snapped in - as I found with mine. Easy to replace if you Google or follow above advice and take your time to remove and clean up the plastic insert. Also seem great value for money for the price difference of a new key especially.

The buttons fit perfectly, but it requires a little bit of a gentle disassembly of the button frame , once you have the frame removed, insert it into the silicone buttons and note where the pegs are located on the frame as this is where you will have to apply firm pressure to install the buttons and frame , you will hear a click when they are fully installed . I think there are plenty of guides on youtube. This is a far more cost effective option than replacing these keys.

The rubber had perished on my old keyfob - making it unusable. Quoted upwards of £180 for a replacement key. Tried this out and it was easy to fit and worked a treat. Key now works and I have saved £180 - result!

Excellent replacement part, so easy to install and seems really durable.

I bought this keypad replacement a while ago and have only just fitted it. There are several videos on YouTube which show how to fit it and I suggest watching a range of them. The process looks a little daunting, hence my delay, but it all worked fine. I found that the broken rubber keypad came off easily by pulling it with tweezers and the metal border also popped out easily. The tricky bit was getting the plastic holding plate out from the key fob as it is secured with seven plastic pegs. I used a small flat screwdriver to prise it out a bit at a time and carefully worked my way round. The plate clicks as each peg is pulled out from the holes in the key fob, and although the plate is thin and looks fragile it was undamaged. The pegs have ridges at their ends where they have been burred over initially to secure them and I recommended filing some of this ridge off to make refitting easier. I cleaned all the parts well with a damp cotton bud to remove any dirt then fitted the new rubber keypad over the plastic holding plate, replaced the metal border, and pressed the keypad/plate firmly into place. My keypad fitted well and all three key buttons worked although the bottom button did not click and felt a bit tight. Some videos recommend gluing the keypad onto the holding plate rather than removing it the way I did. This may be simpler but maybe not so secure and maybe difficult to remove in the future.

It doesnt fit a Hyundai IX35 key fob IX35 is more rounded , annoyed because seller should be clear what they are selling , please alter wording

Dose the job key fob looked well

Excellent fit & functionality. And FAR, FAR less expensive than a new key fob. Just see YouTube for instructional fitment guide.