AllcamHeavy Duty Mount Size Adapter Kit for TV Wall Mounted Brackets - Ultra Slim Design Will Adapt Mount Size 200x200 to Mount Size 300x300 & Mount Size 400x400 w/ Screws & Nuts

Bought to adapt 200 x 200 vesa to 300 x 300.Does the job, easy to fit. Good sturdy product

Converted my existing wall bracket from 200x200 40” JVC to 400x400 55” Samsung. Two days in and it hasn’t fallen down yet so I think it’s sturdy enough. Only issue is that the spacers that come with the pack were too long for my tv, using the thicker bolts in the box when screwed all the way in they left a 9mm gap between the screw head and back of the tv. The spacers are about 14mm however when you put these between the tv and the screw head the screw can’t get far enough in to engage, it spaces too much! Had to basically cut the spacers in half to give me ones about 7mm (bracket is 2mm). Could be difficult if you don’t have any tools. If they could give you a smaller set of spacers, like you get a smaller set of screws to cover various tv’s, then that would have been useful.

I bought a new TV which had VESA points lower than the TV it replaced such that the lowest position was too high. To avoid lowering the mount on the wall I looked for some way to extend the "hangers" and came across this. It was ideal. I mounted each hanger to one of these plates such that the end of the plate fixed to the lowest hole on the TV and the hanger is 10cm higher, almost exactly the distance I wanted to lower the TV. Works a treat and the seller I bought from has a really low price.For information the holes are 8mm and the kit has 8mm screws of different lengths, four 8mm nuts and four 15mm plastic spacers. It also has four 6mm screws, but washers will be needed if these are used.

Sturdy and versatile

Sturdy bracket but didn’t fit my new LG television immediately. After a great deal of head scratching, I eventually got the holes to line up by turning the bracket through 90 degrees and turning it over. If I had not tried to follow the instructions it would have been fine!Instructions need to be rewritten to show how to fix to all brands.

Converted front 200 x 200 to 400 x 400.Fitted a treat easily.

Our old telly used a Vesa 200x200 mount pattern, this product allowed me to adapt the existing mount to fit our new telly which has a Vesa 300x300 mount pattern.Was very easy to fit with the supplied fittings.Only downside is that it does block some of the cable ports on the rear of the TV, we only use the optical cable one on that area of the TV and it was tricky to get that connected. Not really the mounts fault though.

Having read some of the reviews for this I admit I was a bit worried and unsure about how it would work.My existing bracket is 200*200 and made for it said up to 32 inch and 25kg.After a bit of research I found that weight and vesa holes are the only important thing. I had a 32 inch and 43 inch lg on my mount at 200*200.Just recently I got a 55 inch lg with 300*300 holes. I ordered this product to extend my existing bracket.I wasnt sure exactly how it would work by looking at the pictures,but basically it worked great.It just literally a llowed me to attach my existing bracket to it and this new one went into the tv.It came with two plates,4 each of m8 and m6 screws which were good snd long with 4 spacers..There were screws and nuts to get the old bracket attached which were pretty easy to get on with the hand,although a bit awkward.Overall very happy my 55 inch is up nice on the wall on a mouunt I bought years ago for a 32 inch samsung.Just one thing I would say is that if you have less than 55 inch tv,the new brackets could end up coverring some of your inputs,Lucky for me they missed all on mine