Does this have no-go zoning?

I have the Shark IQ XL self empty product right now. So far it's okay except the fact that you'd have to use c the border strips for no go Zone. Which sucks for a product like this. I have a an ecovac that has no go Zone feature included in the app. I still have 30 days to return it for full refund. Supposedly there's app feature update to add no go Zone. But I'm not going to hold my breath on that. 29 more days to go till I return it.

Is anybody else having issue trying to get a complete map? After 60 runs within 3 resets I still don't have a complete map. Glad it's still in 30 days

Yes. To speed up the mapping 1) turn OFF scheduling and always start cleaning manually at 100% battery (do twice a day if possible), 2) turn OFF "Evacuate and Resume" and "Recharge and Resume" and 3) set the power to 'Eco'. Sometimes when cleaning by schedule the robot only goes for 60 minutes which in my case doesn't seem to be enough time to make a good map. "Evacuate and Resume" sometimes sends the robot to the dock after 30 minutes which burns battery life and seemingly the robot does not map on its way back to the dock. 'Recharge and Resume' sometimes creates a 2nd run in the day and the maps from the 1st and 2nd runs don't seem to reconcile into a better combined map. With the power on 'Eco' the cleaning runs could be 60% longer depending on your floor type so the robot will have more time to explore and map. For the first time, today I did all these settings and my robot ran for 162 minutes and did the best map of my entire floor yet (about 2400 sq ft of hardwood and tile - the app says it cleaned 1648 sq ft on this run). Previously I had the power set to normal and used 'Evacuate and Resume' feature and the run would only go about 90 minutes before the battery got too low. A tip about resetting/deleting the main map: A few hours after every run look at the main map and the daily map in the history. The daily maps should be covering 90+% of your floor layout with the robot going into every room at least a little. If the main map looks way off (or is very small) and isn't improving after a few runs that clearly have better daily maps, then delete that main map and try again. I have 47 runs with 1 delete/reset on Day 9 and I'm still waiting for a completed map (it's Day 18 (cleaned on 15 days)). Frustrating. I'm tired of the robot aimlessly wandering around the entire floor as if every room needs equal vacuuming. I'll be happy when I can get the robot to clean only the kitchen twice a day and the entire floor twice a week. My app is Android version 2.1.9 (1013) and the firmware version is V3.4.11-20191015).

Can i use this unit with 220v - 120v step down transformer but still keeping frequency to 50hz instead of 60hz?

The vacuum is fine to charge on either voltage, BUT the cleaning base runs on AC and will burn out with a step down transformer

How does it do with kitty litter?

The robot is intended to pick up dry particles and debris off your floor, if this is excess kitty litter that has spilled over it can clean this up for you in Max mode however the robot should not be used to clean up soiled litter.

Power Source	Battery Powered
Batteries are Included	Yes
Voltage	100240 Volts
Capacity	45 days
Compatible Devices	Amazon Echo
Form Factor	Robotic
Control Method	Voice
Filter Type	Non Washable Filter
Battery Life	30 days
Battery Type	Lithium Ion
Surface Recommendation	Floor, Carpet, Hardwood
Special Features	Cordless
Controller Type	Google Assistant, vera, Amazon Alexa
Item Weight	5.87 Pounds
Item Dimensions L x W x H	38.9"L x 26.3"W x 49.6"H
Color	Black

细节

描述

规格

有问题吗？看看别人问了什么

常见问题