Question 1

do you sell an MT2 arbor for this face mill? what is the part number?

Accepted Answer

I don't sell them, only use. It may be possible to find an MT2 arbor, but it will need to have a system to hold to hold the arbor in the spindle, like an R8 or C5 spindles have, otherwise the vibrations will knock the arbor loose and cause problems (possibly personal injury, damage to tooling, and damage to other objects in room).

Question 2

which arbor will work with cutter?

Accepted Answer

The bore of this AccusizeTools - 4" x 1-1/2" 90 Deg. Square Shoulder Indexable Face Mill with 8 APKT1604 Inserts installed, #4508-0020B is 1-1/2";   so if you use them for CAT40, the arbor is 6780-7108 which is CAT40 to 1-1/2" ;   if you use them for CAT50 which is CAT50 to 1-1/2" , the arbor is 6780-7136;  you can find them all in Amazon.com.    if use this cutter on Bridgeport mill, the arbor is FG22-8096 which is R8 to 1-1/2".  Thanks.

Question 3

Will these work effeciently on a Bridgeport, or are they meant for a more rigid CNC.

Accepted Answer

this 2" dia. tool cuts and is primarily designed for cnc milling. due to the optimum speeds and feeds that carbide is run at for best performance and tool life, CNC's are the only way to achieve that. (handles don't crank that fast, ha). That is an official answer, off the record, it will work fine on a manual mill. In most steels, I recommend about 900-1200 rpm, with a good constant feed with chips that turn to a brown or even blue but not until they leave the tool.

Question 4

Do you make an Mt3 Arbor for this face mill?

Accepted Answer

We currently don's supply MT3 arbors for this cutter. Maybe you can inquire the other sellers. Sorry.

Accusize 2 in Indexable Face Mill 3/4 in Arbor, Carbide APKT1604 Inserts | 90 Deg Square Shoulder, 5 Inserts Installed, 1.75 in OAL, 0.551 in ap, Nickel Plated Body, 4508-0012

Description

Common Questions