ScoscheICCR6BN Complete Double DIN Stereo Installation Kit for Select Non-Amplified 2007-20 Chrysler, Dodge, Jeep, Mitsubishi, RAM and VW Vehicles - See Fit Guide in Images to Verify Your Vehicle

Trajo todo lo necesario para la instalación. Ajustó perfectamente en una Jeep liberty 2012

The harness is generic and very basic. will work for a base model setup vehicle. If you have back up camera or steering wheel controls you will require extra harness modules.FYI** you will need to wire your ignition source separately on a 2011 dodge ram 1500 ( I assume on most vehicles as well) I picked up off of the back my "ignition on" cigarette lighter. using a Blue Scotch Lock Wire Connector Quick Splice Terminals Crimp. There is literally no amperage draw as its just a switch for the main power.

Great kit especially for the price, that gives you everything you need to do a basic radio install. You will have to run your own accessory wire, which can be done in most Dodges to the cigarette lighter positive as long as it is switched (cap will usually have a key icon). You will need an extra module to retain steering wheel controls, I used a PAC SWI-RC-1 for our 2013 Caravan.One thing to note however is that out of the box, the mounting plates are designed in a way that they will not fit properly on many newer "shallow face" radios, they will sit too far inward. It seems to be a legacy design from back when many DVD double dins had deep faces. In order to get them to fit, I had to take the inside edges to a belt sander to make them flush with the side plates, so that they can be positioned fore/aft on the sides of the radio freely.

Needed the plastic adapters and the antenna adapter to fit a double din into my 15 wrangler jk. Worked great.

Me encantó este kit de instalación, el material es de calidad y prácticamente utilicé todo lo que contiene para conectar mi estéreo 2ble Din. Se ajustó perfecto para mi Jeep Patriot 2015.