CASEMATIX Customizable Travel Case Compatible with Quest 3

I'm not really here to review the CaseMatix product itself as much as to offer my experiences and assistance to the community of users / customers. The product seems fine and sturdy and will serve its job well. Seems a little high priced to me, but also seems pretty good quality and should do its job well if you cut the foam properly. That was my first surprise (and not immediately obvious to me) that you have to design it yourself for whatever your use. That's a good thing, because you can use it for a lot of purposes and use it the way you see fit. But it's also more work to have to try to decide the best configuration. It gave me pause, because most of the ad photos show the product finished after someone has cut out the squares. NOTE: I'll try to attach media to this post in the order mentioned in the post. No promises, though! :-) MY LAYOUT DESIGN AND TEMPLATE FOR THE OCULUS QUEST 2 (default head strap) So I looked at the photos that other customers submitted for the way they designed the foam for the Oculus equipment (thanks for those submissions, everyone!). Then I embarked on designing my own. I tried to design mine with extra cushion (2 squares) towards what would be the bottom of the case when it is closed and standing upright. I also didn't want any of the main pieces touching each other and clanking together, and at least 2 squares between almost all of the pieces. I also wanted the pieces to be snug, so they just fit in there and hold in place well. The heavy end of the headpiece is towards the bottom of the case so that when the case is closed and upright, it will not exert extra pressure on headband / earpieces / any other pieces. As you can see, there is also a special section of loose foam (green section in my grid template) to attempt to protect the lenses and keep the headband tamed. The headband excess is folded back and forth gently in its designed foam pocket, leaving extra room for other features in the case. Finally, with some remaining space near the handle of the case, I'm using 2 squares the length of the case for chargers, cords, etc. I found that the foam squares in my CaseMatix case are 28 across by 21 down. Since I had to go through the design work for myself, anyway, I was inspired to freely offer the blueprint for this design here so that others could use it if they felt it would meet their needs and did not want to take the time to design their own (see photos to make this determination if you are interested). To do that, I obtained a grid and colored it in accordingly (see photos). I also included a blank grid (see photos) in case anyone else wants to document their particular design for others to use similarly. I hope this is helpful to someone! :-) TIP FOR SEEING FOAM SQUARE EDGES I also found that it was difficult to keep track of where the edges of the squares were in normal light (for grid transfer, counting squares, precision separating, etc). (Maybe this is my eyes? or maybe I'm not using enough light?). So I offer this tip you can kind of see the square edges when light is above or around you (see photos), but you can really easily see the square edges when you lay a light source (like flashlight) down on the foam and shine it across the surface of the foam (see photos)! SEPARATING THE SQUARES I initially missed the small, single-sided "foam customization guide" included the the case because of the advertisey-looking "follow us" message on the opposite side. So I made the mistake of trying to cut my first section out with a knife. That is not necessary, though, as the squares are connected to each other in such a way that you can pull them apart with your fingers. Once you pull them apart, they are permanently separated, unless you tried to glue them back in or order a new foam replacement. If you pull them apart, there seems to be much less (maybe even none) loose foam fragments than if you try to cut them out. After I discovered the "foam customization guide", it says you can "press down firmly on the blocks of foam you wish to remove and they will separate from the surrounding blocks" however, when I tried this, I was concerned that this method might weaken the connection of the surrounding blocks I wanted to keep in place. So instead I found that separating each block connection one at a time was better. I'm going to try to submit a movie demonstrating this technique (see attached movie). It allowed me to precisely sever only the connections that I wanted to without compromising surrounding connections: You insert your finger on the connection you want to sever (in between two squares), and alternate (wiggle) the tip of your finger back and forth against the two foam blocks you are trying to separate as you press your finger all the way down to the bottom of the blocks. OTHER IDEAS: I am experimenting (see photos) with storing (and attempting to protect) the long and expensive Oculus Link cable under the main foam, so that I can bring it with me and not have to pack it separately and hopefully not have to worry about it getting any kinks / sharp bends in it. I also experimented (not pictured here) with trying to fit my dedicated wireless router in the package (but mine is a little too tall with antennas that cannot be removed), and the chargers and a Chromecast device. The router was really the only thing that didn't fit because it was too tall. So the good news is that there's additional room you can experiment with in this design. Finally, I had another, generic idea to share about the CaseMatix case: This might be especially helpful if you only use it for transporting? You could purchase more foam inserts, and switch them out, depending on what you want to store / transport in it. I haven't checked how much the new foam inserts cost, though, to know if it is very cost effective or not. Information about this is available on the insert called "foam customization guide" (at the CaseMatix website, apparently). Dont forget to register at their website for your free lifetime warranty! (as mentioned on the "advertisey-looking 'follow us' message" insert).

I will NOT recommend this case for FrankQuest. I purchased this case to protect my FrankenQuest mod. I missed Nevan's reviews and photos (which I regret). Please read his review at https://smile.amazon.com/gp/customer-reviews/R2YQA25DX7WUY5/ref=cm_cr_getr_d_rvw_ttl?ie=UTF8&ASIN=B07S59ZSMN The case is great to protect your Oculus Quest and other gear, but NOT for a modded unit (FrankenQuest). I will give it 5 starts because it IS a good case and the vendor never claimed it would fit the HTC Vive Deluxe Audio Strap. If you need a nice, strong case (but NOT as strong as a Pelican case), this case is a good choice. Now... for MY problem. For those that don't know, a FrankenQuest is a simple modification to the Oculus Quest, where you remove the default head-strap and attach a HTC Vive Deluxe Audio Strap (DAS). Using the DAS in your Quest will redistribute the weight of the Quest away from the front (making it much more comfortable), making is super easy to adjust (great if you share your set) and enhance audio with excellent over the ear headphones. Its super nice! Information can be found at https://smile.amazon.com/HTC-Vive-Deluxe-Audio-Strap-pc and you can Google "FrankenQuest" for video tutorials. I will agree with Nevan that the DAS seems to be a bit too tall for this case (see the photos in his review). While the DAS is flexible and I could force the case close, I'm concerned that it may permanently damage the DAS in the long run. I would be more comfortable if the case were 1 inch taller. I will NOT recommend this case for FrankQuest.

Great case it fits my quest 3, audio battery head strap, facial interface with fan, and my controllers. The case also closes well with all that stuff in it. I might have to buy a new foam insert soon so I can redo it I didn't do vary well the first time around. Seems like it will protect the headset well. I was also surprised about the weight of the case it is lighter than I thought it would be even with everything in it. Overall I really like this case and it looks nice to.

Up front, I'm being super critical of this case. I bought this case after I realized the Oculus box wouldn't accommodate the grips that I purchased for my controllers. This was the only case I found that looked like it could accommodate (through customization) the grips I purchased (seen in pictures). This is a solid case. I'm not fearful of damaging the Oculus if the case takes a hit or gets dropped. That said, the plastic does feel a little weak. This isn't a Pelican case, but if you know what that is, then you understand that bar is high. The hinge system for the clips is plastic, but it is a hinge system not plastic that bends. So I'm much more comfortable that the clips will last over time and not wear and break. The customizable foam was easy to break out, with just my hands. Allowed me to do whatever I wanted with it. The foam is very study, even with a single block separation. The separation between my controllers is 2 squares. The separation between the Oculus and the controllers is 3 squares. It fits all that, the charger plug, and the thing you can't see is the ChromeCast. Overall, I'm very happy. If this case was $30, it'd be a 5 star and I'd feel like I got every penny worth out of it. At $50 (what I paid) I feel it was a little expensive which is why I knocked it down to 4 stars. But don't let that stop you. If you need something customizable, and it's for your 400-$500 Oculus, then this $50 case at anything less than $50 is a good value to a steal.

It was absolutely perfect because you can customize it easily to accommodate my Question 3 and Bobovr S3pro headset. Great protection for the gear! Worth the price.

Easy to customize for your individual needs. Just be sure you've measured and laid everything out to be sure it will all fit. I've included 2 pics... One with my cuts and one with the case populated. I have the KIWI design K4 Boost Comfort Battery Head Strap and the AMVR Facial Interface. It all fits nicely. I did cut out a small section of the bottom padding of the case to accommodate the head strap so there wasn't too much pressure on the strap when closing the case.

Liked being able to customize and not throw everything in there. Protects the controllers and system with the foam and customize the way you want to. Its thick and sturdy enough to break a fall (without elite head strap), and easy to carry around or store the system away. . It is not quite the thick enough to fit the elite head strap. It will fit the head strap that came with the oculus 2. You can cram the elite strap in there, and it will close and lock, but it will cause the case to push out a little in doing so. You have to be careful not to shut too hard you might break the elite strap... and I am afraid if it is dropped, it may break the elite strap. Overall great case, just needs to be a tad bit thicker.

Nice enough case, but the ad says it is for the Oculus Quest 2, and all the photos show it cut out to perfectly fit the Oculus Quest 2 and all its component parts. But that's not what you get. What you get is a generic case and you have to cut out the spaces for the product yourself. I stink at that. If that's what I wanted to do there were cheaper alternatives. I though this would be pre-set up for the Oculus Quest 2 like ALL the photos show. But you have to doit yourself. I tried. I stunk. Now it's a crappy product. If you're not very "crafty" you may not like this. If you don't mind doing the work yourself, then it's an okay product. I'm very disappointed. I only gave it as many as 3 stars because it seems fairly sturdy.

Great case, I didn't use the recommended setup for the Oculus with battery strap as I found the buttons on the hand controllers faced down on one of the controllers when using this setup, which could result in your batteries being drained, so I used my own setup that keeps the hand controller buttons free from being accidentally engaged. The only thing that would be nice would be to have this configuration in a permanent moulding rather than the tear-off pieces, but that's a wish list, not a product fault. That said, If you sold one for this case, I would buy it, as over time, the tear-off pieces tend to break off! But it's a fantastic case and much better than anything I have tried before!

First off.... its an awesome case!!! Second.. I'm very upset because I specifically orded this because it said it fit the elite strap. Well...as you can see in my pic, it stays open 4 inches!!! Meaning I have to force close the lid that far. Not cool!!! Especially when you advertise it for this after market accessory. Unfortunately the foam insert is custom fit to the curvature of the case. I turned it around, so the gap was smaller, but it was harder to close,.. from the high point of my oculus to the locking clips as it's closer now. Either way.... its being forced shut. The case should be deeper for this accessory.

Es un buen case de alta calidad se siente resistente, lamentablemente el mío llegó roto de una bisagra, no hice la devolución porque si necesitaba el producto, quizá se dañó porque el producto no viene dentro de una caja, solo una bolsa de plástico y las paqueterías nunca tienen cuidado, le doy las 5 estrellas porque me gustó mucho la calidad y es buen producto lo recomiendo

Es un excelente producto la verdad muy contento con mi compra bastante amplio y fácil de transportar lo uso para mi equipo de multimedia Cabe la mezcladora micrófonos inalambricos una laptop y una tablet además de otras pequeñas cosas

I use it with the Meta Quest 3 with the Aubika Fast Charging Head Strap for Meta Quest 3 with Built-in 8000 mAh Battery Pack, Elite Strap Replacement and every thing fit great and it is crash proff if you have a cat and you wont break anything even if you drope it. Best casing ever.