RAM Mounts B Size 1" Handlebar U-Bolt Mount Base – Fits 0.5"-1.25" Rails (RAM-B-231ZU)

Works great. Too bad my old RAM Mount handlebar mount didn't come with the plastic insert for the U-bolt. I used it to mount a RAM mirror to my ATV with a Long Arm. There was no room on the handlebars for it, so I put it on the corner of the rack extension that goes around my front rack/cargo box.

The product is excellent, arrived relatively quickly, packaged properly Thank you very much

This base mount is a great product. I have three of the ball mounts, a handheld GPS holder and a quick release strut from RAM mount. I can move my GPS from bikes to boat. It is easy to remove the GPS. The zinc coated may not be the best choice for high salt humidity, but only time will tell. After one year on bike in Florida no issues. Popping the GPS in and out of the holder made me nervious at first but, this stuff is rugged, and the plastic GPS holder has held up well. All nice products I recommend them.

Love my ram mounts for my motorcycle! Had to buy a replacement because after multiple times of moving it and over tightening it I tightened it too much and broke the threads. But very strong and durable. Highly recommend

I'm using three of these RAM U-bolt mounts on a Trek DS 8.5 hybrid bicycle. Although the 31.8mm diameter handlebars have a tapered diamater rather than a fixed diameter, I was able to tighten this mount down securely with no problem by using the smaller of the two U-bolts. The larger 1.5" U-bolt also fit nicely over the fattest 31.8mm section of the handlebars. The V notch on the bottom of the mount combined with the U-bolt allows easy tightening against a round surface with increasing diamater. I use it to hold a Garmin Oregon 450, a Samsung Galaxy Player WiFi 5.0, and a flashlight/headlight. I appreciate that the U-bolts I received in this kit are painted black: The black hardware blends better with my black handlebars. One of my favorite features of RAM products in the ball-and-socket joint. Once you tighten it down, it stays put. However, there's still a little bit of flex in the rubber balls so that whole setup absorbs some shock. I appreciate that on my mountain bike. The kit includes (see additional uploaded picture): The aluminum mount with 1" rubber ball 2 black U-bolts--a smaller 1" width one and a larger 1.5" width 2 nuts with nylon friction inserts 2 rubber nubs to cover the U-bolt ends 1 plastic adapter insert to narrow the U-bolt down for use on handlebars as small as 1/2" in diameter Be careful with part numbers. RAM-B-231Z items seem to have multiple configurations on RAM's website. Some hardware is zinc coated, some is stainless steel, and some is black powder coated. I ordered RAM-B-231ZU from Amazon retailer GPSCheap and received the parts as indicated above. I ordered another RAM-B-231ZU from GPSCity and received the zinc coated 1" U-bolt only. The rubber nubs were too loose to use in my application, partly because their inner diameter is too large and partly because I didn't have enough of the U-bolts exposed for them to be very useful or secure. Also, the kit does not come with washers (-1 star) and you'll likely scratch the mount with the nuts as you tighten if you don't add your own washers. I added washers in order to protect the mount. Be cautious when installing: If you're metal against metal, you may cause some scratching with the U-bolt as you position it.

After 10years of trouble free service from my old Ram GPS mount , it was time to buy a new RAM GPS mount. Not because the Ram wore out, but because My bike did. This ball mount fit perfectly on my 2008 BMW 1200 GS. I chose the shorter of the 2 U bolts provided. (It's unusual that the product description doesn't mention there are 2; a long and a short) and mounted it above the speedo on the round bar that supports the wind screen. I didn't bother to try, but I assume the longer U bolt is the right choice to mount to the handlebars. Since this purchase I've logged around 1000mi with the GPS mount and have had no problems. With my experience to date, with the old system and the now this one, I'm confident this part will outlast my bike. Maybe I should put it in my will :)

I put three of these on my bike: one to use with a phone mount, another for an Insta360 camera, and a third for a RAM Mount cup holder. Very sturdy. Not much handlebar space to fit a mount, these are a good solution.

I bought the following combination of RAM products to mount my Nuvi 2455LMT on my 2000 VSTAR 650 motorcycle: + RAM Zinc Coated U-Bolt Base w/1" Ball (RAM-B-231ZU) Sold by: GPSCheap + RAM Composite Short Double Socket Arm for 1in. Ball Bases (RAP-B-201U-A) Sold by: GPSCheap + RAM 2.43" x 1.31" Diamond Base with 1" Ball (RAM-B-238) Sold by: GPS City + RAM Plastic Cradle (RAM-HOL-GA25U) Sold by: Amazon.com LLC The combination of the 4 pieces gives me a rock solid GPS mount that was easy to install and very flexible as far as positioning. Obviously you can swap the cradle for whatever product you need to mount. I chose the 1” balls and short double socket arm because I didn’t want the GPS sticking out from the handle bars too much. If you mount the U-bolt base with the ball down and then have the socket arm coming back up, then the GPS/Phone/Whatever will be tucked in nice and close to the handlebar.

kit support acheter pour l installer sur une moto. Pas encore essayé sur route mais quand on serre ca ne bouge pas et ca semble vraiment très solide ! Je recommande. il y a deux anneaux de serrage pour différent diamètre c'est top. J ai apprécié aussi les petits capuchon au bout des tiges fileté pour que ca soit mieux fini (je ne l'ai ai pas monté sur la photo). Les écrous sont a serrer avec une plate de 11. Je conseille de mettre du ruban silicone auto adhérents autour du guidon avant de monter le support afin d'être sur de ne pas marquer le guidon et aussi pour avoir aucune vibration

Ok

Ürün taş gibi sapasağlam, normal süresi içinde elime ulaştı. orijinal ürün, tavsiye ederim.

Meets expectation

A good, solid piece of kit that feels well made and of substantial weight (which is quite reassuring). Easy to fit although my motorbike doesn't have full width handlebars so was a bit different but got it on and it's well secured. Only purchased and fitted a short while ago but have been out for a few runs with no issues and I'm really pleased with it and would definitely recommend.