Plastic Adjustable Float Valve for Aquarium Water purifiers Reverse Osmosis System (Type-k3)

Worked perfectly to direct plumb my espresso machine. Adjustable float arm allowed me to position water inlet under the water level so you can't hear it dripping while filling. Nice and quiet. Easy to install, would definitely recommend. One wish is that the right angle piece would rotate freely -- I had to take whatever angle it ended up at because it leaked if I didn't tighten it all the way.

Hey, this is a great item. I bought it to make a water supply for my Westie's. I purchased a stainless steel bread pan for $4 and mounted this to the side of it and then just attached some 1/4 inch tubing to the water line for our fridge and the dogs get fresh water all the time.. Very nice item. I only wish I had done this before purchasing a $40 water bowl as they get mold up under the mechanism and it's very hard to clean them.. With this all is out in the open so I can detect if any mold would start... So far, a month and no mold.

During install, I noticed the threaded portion of the ball valve leaked heavily. I ended up having to put a few layers of Teflon tape and loctite to make it stop leaking. The shu.t off valve also leaked, so I had to buy little pins to lock the hoses in place to keep it from leaking. Once I got these issues ironed out, it was perfect. The ball valve is adjustable so you can set it to stop filling at your desired point.

My brass RO float finally corroded through and since any metal except stainless is susceptible to being attacked by reverse osmosis (RO) water, this was the logical choice for a replacement for my RO tank.

Excellent solution for making my Keurig never have to be manually refilled again! Has the be the worst problem ever first thing in the morning is having to fill it up with water... (first world problems right?) and this is a cheap and simple solution to connect to fridge ice maker line and have reservoir always full!

My coffee maker will get a ton more use now that I never have to fill it up again. This package contains enough to allow you to T off of the water line if you have an ice maker on your freezer and hook it to the Keurig. I had to use an abundance of Teflon tape to get the thread in connection to not leak, but otherwise it was about a 20 minute install.

Worked great in my Keurig! Make sure to take the internal charcoal filter mechanism out. Also, be sure to tighten well with Teflon tape on threads or you will get a leak.

The float is good. I found the water flow awfully slow for my application (automatic watering for my garden, SIP). I disassembled it and enlarged the dispensing hole and now it works great. I especially like that it is short and stubby so it will fit inside a 5-gallon bucket. Most floats are too long to fit inside a 5-gallon bucket.