VIVOElectric 60 x 24 in Standing Desk, Memory Height Adjustment, 1B Series, One-Piece Black Top, Black Frame, DESK-KIT-1B6B

Desktop looks and feels great. Main concern is packaging. The box was not taped very well. Need to use that filament tape to make sure it stays closed. Fortunately, there was no damage. Could also be attributed to our favorite brown-knickered delivery crew.I bought this for my office at work. Went with something less expensive than the standing Veridesk at home. Aside from the thickness of the top, I would say this is in the ballpark.There's some wobble with the desk as it goes up in height. This was mentioned by some other reviewers as well. However, I don't think that is a big deal at all. I would probably purchase this over the verdesk if I had known about this sooner because it is a fraction of the cost.Regarding the size, you definitely want to get the 30 in depth one. 24 is too small. I am also getting the monitor arms delivered today, so that should free up even more space.I also purchased casters to go with the desk, but I found that after installing them that the desk sat too high even at its lowest setting. This is was an issue, because it was very difficult to use the mouse and type. So now I just have the desk on it's regular feet.

Desk works and looks as advertised. For the price I think it was a good value. Metal pieces are sturdy and of good quality. Desk is not solid wood of course but looks nice.During shipment the desk motor and controller were damaged and could not be used. I contacted the company via email, and they were quick to help me get the issue corrected. Had a new motor and controller shipped out promptly. Nice to have a company be so responsive and not unnecessary hoops to jump through. Just needed to provide the Amazon invoice and a photo of damage with part number.

*Husband review*Sent this to Seller on JAN-26-2024:"Sharp edges observed at leading edge of panel joining. Recommendations for safety & level:(1) Full-length joining channel at front & rear instead of four short channels. Middle panel least support - continuous passive/active downward load with resting hands on keyboard.(2) Thicker gauge screws for joining channels, need better grab per above.Otherwise.. very nice, very quiet desk, good price."Assembly was fairly easy. The only challenging aspect was setting the leg width AND drive rod simultaneously. Otherwise, you should have this together within 2 hours, max: 30-45 minutes for the frame, and the rest of the time putting the top together, placing it on the frame, and situating the desk. A cordless drill with a low speed/high torque and torque adjustment dial will make this even easier. You just need one #2 Phillips and one Allen wrench bits to get this done. No hammers or other tools needed. They made it very simple especially with having the motor already mounted. Great instructions, too.The height adjustment is surprisingly quiet and VERY smooth. You have four programmable pre-set buttons with a manual UP and DOWN button. The lowest possible setting with the provided casters is a typical sitting desk or dining table height. So, depending on how you prefer to elevate your hands/arms for typing and using your mouse, you might consider an undermount keyboard/mouse thingy. It feels like the desk can be manually increased/decreased by 1/8" increments -- you really should have no issue finding the right height for you.The frame has substantial enough weight to keep the top from feeling the slightest wobble. This was my biggest issue with my prior desk -- if I bumped it during a video call, it would wobble and look like I was having an earthquake.And the top is substantial enough to mount reasonably weighted items underneath. Not just baskets and tracks to hold cords and surge protectors, but PC mounts if, again, it's reasonable. Make sure your screw length won't penetrate the top surface. For what you set on top the desktop surface, follow the manufacturer's limits for combined weight.The frame box includes two of these cord holders. When mounted, they're out of sight - out of mind, so.. I don't have a use for them, yet! But I suppose they could hold headphones or a corded earbud/IEM. Maybe a few cords, dunno.I got the 32"Wx63"L unit. In hindsight, I might have gotten the longer desk (73" I think) because my old desk was sort of L-shaped, but I'm using less equipment now that I have a KVM switch for my 2-PC / 2-monitor set-up. So I should be good to go.UNRELATED TO THE DESK ITSELF BUT CRITICAL TO KEEP IN MIND.. Just be very clear AND CAREFUL when setting up your cable management, accessories, and living beings stored/visiting under ANY sit-stand desk:- My PC is on a standalone cart just inches from the floor, under my desk to mitigate sound/vibration issues. I had to ensure my HDMI, DisplayPort and USB-3.0 cables (A) were long enough at the DESK'S MAX HEIGHT position AND MONITOR PLACEMENT and (B) didn't cause a trip hazard since there's a walking path along the backside of my desk. Be mindful of the absolute max-height needed where all your connections occur. The last thing you want is to proudly sit at your new desk, press the button for max height, hark! the herald desk rises to glory, annnnnnd your monitors (assuming on stands and not mounted on arms) get ever so slightly tilted then violently pulled back only to plummet to their demise.- I have two large speakers and my PC tower/cart under my desk. I had to make sure at the lowest possible position, the motor would not crush/break or otherwise come in contact with the top of those items. Luckily, the speakers are ~3" away from the bottom of the motor, and the PC is set on the outside, between one of the legs and the wall. If you keep a filing cabinet or some other accessory under the desk, be aware of all elements under the desk's structural components during set-up.- Goes without saying.. Watch for small children and pets when raising and lowering the desk. When the desk achieves the lowest point, there are likely pinch points at the base of each leg.

This desk is very practical and looks beautiful, sturdy and not bulky. Goes up and down smoothly and the programmable setting is great.I had a bit of an issue with some parts that arrive damaged and the control panel not working properly, but let me tell you that the customer service/support was superior. They were very responsive and worked with me until I had a properly working desk. I love the desk. It is just as described.

Love the table. Easy to put together with one person. Super smooth, quiet height adjustment. Exactly what i needed. Well worth it. 4 stars only due to packaging and shipping. Box was pretty banged up, table leaves were loose, and one piece had a small dent on edge. Kinda looks like holes were made in box to make handles to carry it. Luckily for me it was on a back corner and monitor is blocking it. Had it been on front edge, would have had to return it and get another. Not company fault, but still needs to be noted.

This desk is exactly what I was looking for. It feels very sturdy and I love that the desk extends super high for my husband who is 6’5. We ordered the black and it appears easy to wipe clean.It was very straightforward to put together and took about 45 minutes maybe. I do suggest aligning your table to the holes when tightening the long pole underneath. (They don’t give you the exact measurements to tighten it.)