SealeyEasy Peel Shadow Foam® 1200 x 550 x 30mm - Green/Black - SF30G

Used this product to make a case for my wood carving kit.It was very easy to cut however it was quite difficult to separate the layers.I had to re do one side as the sheet had a large hard bubble in it.Overall very pleased.

Works just as well as the more expensive brand 'shadow foam'

Ordered this to pack camera gear, when it turned up i realized I'd ordered way to big a sheet that's not a bad thing I've used this foam to pack loads of stuff now!! With a Stanley knive the foam cuts easy, and I'm sure if I was was capable with the laser it would be even easier. The easy peel stumped me, i ended up using the Stanley knive to make the foam thinner. Overall perfect foam for lining and packing your gear cases.

Used this to organise my draws on my roll cab box. Makes it extremely easy to know if something is missing as you can see the gap. Also keeps everything organised and laid out nicely so you can see everything with ease.

Looks well and works but it's still just packing foam at the end of the day which costs a few pence. Not sure where the high price comes from.

After a lot of consideration, reading reviews and watching foam insert tutorials/advice on You Tube - I decided to buy 3 sheets of the product. The Sealey branded items are more suited to Sealey tool boxes as the sheets are 550mm wide not 500mm as the similar Shadow Foam product. Firstly, the sheets were not cut at 90 degrees across their thickness (or had become distorted in storage) and secondly, it appeared that the sheets had been strapped together in their boxes, either in storage or in transit and were badly creased along some edges. So before I cut any sheets to size, I had to trim off some squashed edges and straighten other edges so they fitted the drawer edge without gaping. This lost me a fair amount of what is very very expensive material. I could not afford to trim some of the sheets, otherwise I would have not have got what I needed out of it. So I had to live with a bit of creasing. Some of the other reviewers have pointed out the strange 'bin bag' like finish to the top. It is strange, but I think this is intended to make the cut edge a bit more forgiving if your cuts are not quite accurate. The crinkled finish 'springs' into the item a bit. My major disappointment with this product is that it does not tear off in clean layers, and also there are too few layers to create the shape you need. If you take your time and set out your layout with tape or a pen, then you can get good results. The process is more frustrating than enjoyable and satisfying, as those tutorial videos lead you to believe! With additional work, corrective surgery and patience you can get good results. You can also lose a lot of material (money) trimming to correct defects, or by making an error in measurements or cutting an outline wrong. Incredibly expensive for what it is - its essentially the same material that is used for packing electronic items or some TVs. If I had bought one sheet to try it, I would not have bough any more. Overall, it is a good solution to store and keep track of tools, but this material is not on your side and should really be a fraction of the price in my opinion.

Easy to cut to shape! makes finding tools alot more efficient

Ideal shadow foam for tool box, cheaper than the original stuff. Quite tricky to get the flat look when digging it out with a scalpel but still ok for the money.

Tempi rispettati, di buona fattura e contenuta in una confezione adeguata.

Perfektes Teil. Suchte schon nee Ewigkeit solch ein Teil für meinen Bogenkoffer. Man sollte meinen das man den von dem Hersteller des Koffer's nachträglich bekommt. Weit gefehlt. Du kaufst aber bekommst nichts mehr nach. Also hier ist der Koffer. Perfekt ok nicht so schön geschnitten, aber bei nächsten Mal gehts besser. Danke dafür. Einzigartiges Teil.

This is my second attempt (picture with pliers) at finding foam for tool trays, and it had gone much better than the first, much more dense, foam i had purchased perviously (picture with micrometers and calipers). It was far easier to cut the outline of the tools, only tools i needed to make the tray in the photo above were a ruler and scapel. With the dense foam, it was extremely dificult cutting the depth of the foam. This was not the case with the Sealey foam. To control depth, you need only control the depth of the scapel then peal up the layer evenly by making a sort of pinching motion with your thumb and fingers. Its a bit of a hand workout, but it looks nice.

Es de muy buena calidad yo tengo la de 50mm de espesor y cargandola con muchas herramientas pesadas lo soporta perfectamente se puede cortar a cuter con facilidad pero recomiendo con dremel

La mousse n'a rien d'extra ordinaire vous faites la même chose en collant des tapis de sport les uns sur les autres. En plus il ne faut pas compter sur les dimensions inscrite car elles ne sont pas respectées. Donc moi qui avait pris ces mousses pour les mettre dans ma servante d'atelier car la largeur de 550 passait nickel je me retrouve avec un vide d'un peu plus d'un centimètre. Les 1200 font à peine 1180 et les 550 font un peu moins de 540, et le tout n'est pas coupé à angle droit donc il faut recouper.