18x1.9m Led Aluminum Channel V, 1.9Meter/6.23ft Led Channels and Diffusers with End Caps and Mounting Clips for LED Flexible Light Strip

Wonderful quality and made of durable aluminum, they sit perfectly against the top of our baseboards and diffuse the lights very nicely. I wish they came with stick tape instead of having to screw them into something but either way I am fully satisfied. The plastic diffuser cover that snaps into the aluminum mounts is very easy to install, however, beware of you snap the aluminum rail into the mounts it is almost IMPOSSIBLE to take off.

The quality seemed good, they were straight and the covers fit in nicely. The mounts are nice and seemed secure and easy to attach. I had two concerns though. I wanted to hide the wiring so I drilled a hole on the back of the aluminum channel and ran 22 ga 4 wire ribbon through it. The wire barely fit and I would think that this size would be typical of LED wiring. Since the wiring came from behind the end cap won't fit on. There is a triangular piece that goes in to the channel the wiring is running through. I imagine I can modify it to make the cap work, but I haven't had a chance to do that yet. There is a hole in half of the end caps, presumably for the wiring to go through. I think the hole would have been a little small for the ribbon cable too, but would probably work if the ribbon was folded in half. Over all it seems to be a good product and I would recommend it to others.

The clips that hold the track in place need to be bent a little more. Not the 90 degree bend but the part that engages the track, the outside ends. This can be achieved with a pair of needle nose pliers. Not too much 1 or 2mm should do it. Try it without doing that first but if your track doesn’t snap in firmly that is why. Otherwise install was pretty straight forward. Lenses snapped in no problem. I’d use these again.

I would discount a star for the weak diffusion effect, but considering the low price, it is hard to complain too much.The channels I received were perfectly straight. No defects found on either the channels nor the diffusers.I ended up fitting two strips in the channels. They are offset, so the gaps between the leds are effectively half as wide, but their angles are different, so the strips have a kind of odd dappled look.The clips fit perfectly, but I went with removable command adhesive strips.The diffusers went in super easy. Just hook one edge and then push against the diffuser enough for it to flex. Then just held it lined up while I slid my finger or thumb along the edge while gently pushing towards the side it was hooked in.I am using Govee strips. The brightness and led density is acceptable, but not what I envisioned.

The media could not be loaded.  The tracks are easy to use and fit into the corner grooves between the ceiling and the wall perfectly. Although it comes with Clips to screw into the walls I chose to use adhesion tape and that works perfectly well on the track the LED strips also adhere well to the track the light aluminum of the track needs to be cut by the handsaw but the shades that you install over the track once the lighting is put in can be easily cut by scissors

The media could not be loaded.  The v-channels are uniform and consistent dimensionally. Available in several lengths and finishes. The slots for the plastic fogged covers and the covers themselves are consistent as well. The plastic covers are quite difficult to snap into the channel though. They need to be pressed into the top of the channel but not slid into the slots on the channel. I found that once the channels and corner pieces were fitted to the mounting clips with the LED strips securely adhered, it helped with the 6 ft long sections to apply crosswise short strips of blue tape to initially line the covers up along one edge of the channel. Then starting at one end press along the edges and work towards the other end exerting enough pressure as you slide your thumb along until you can hear the cover snap in as you go along as you remove the tape .It can be pretty tiresome if you are working with your arms above your head along the edge of the ceiling. (Which I did for a full 48 feet of cover) . I practiced with a short piece of channel and a fogged plastic cover in my lap until I was able to hear the distinctive sound it makes as it snaps into place. It was well worth the effort as the results of the uniform slightly neon look was what I was looking at as opposed to bare exported LED lights.

I used these to install LED strips in my office and I love the modern look.I have a few complaints, so I am docking two stars:1. They do not include nearly enough mounting clips with this kit2. They do not have joiner clips to ensure 100% perfect alignment when these are butted together. I could go to the hardware store and find dowels to insert into the holes in the molding, or maybe design and 3D print some alignment clips, but geez... these should be included with the kit, FFS3. I wish they diffused light a little better; while this is better than most LED strip mounting solutions, it is not perfect. A nice frosted diffuser layer behind the transluscent cover would be perfect as it would allow better diffusion of the light, not entirely like the diffuser layer in an LCD/"LED" screen.4. Did I mention they didn't include nearly enough strips?I'm docking two stars because of the lack of alignment dowels/pins/studs, plus in case I haven't mentioned it, they do not include nearly enough mounting clips. They include only enough to mount maybe half of the included light channels. I'm having to drill and screw directly through the channels to mount the remainder. I'm displeased about this. If it weren't for the annoyance of insufficient mounting clips, I'd rate these channels a solid 5 stars (because I can make my own alignment dowels).

The tracks are fine. The covers are fine. The brackets are fine.The screws strip out in .2 seconds. Literally as soon as the screw meets any resistance, it's stripped. Go buy some good screws from your local hardware store to install these.

I got these 4 months ago and they randomly showed up now. For the price they are a complete rip off. They do not connect togther if you are looking to surround your whole room with lights. In addition there are no instructions on how to properly set them up. The worst part was that because of track my LED lights were cut in half and I can no longer use them. I would not recommend this product and wish I could get my money back. Please trust me and avoid this product.

El producto es super sencillo, pero cumple al 100% con la función, la mica disipadora es muy resistente hasta el punto que cuesta insertarla en el canal. Los sujetadores igualmente son muy resistentes.Los estoy usando con las tira led Philips HUE y el efecto disipador no es muy bueno usando colores pero para luz blanca el efecto es más homogéneo.Si necesitas usar esquinas recomiendo este otro producto perfectamente compatible:https://www.amazon.com/-/es/gp/product/B07PBNX83G/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Used these to put 16ft worth of vanity mirror lights

I would definitely recommend these for all.

There is better quality products out there